Version 0.75
This commit is contained in:
parent
722e6d5d68
commit
919606b3ab
@ -72,7 +72,8 @@
|
||||
#define sig_byte2 0x93
|
||||
#define sig_byte1 0x07
|
||||
|
||||
#define devtype 0x77 // Mega8 boot device code
|
||||
//#define devtype 0x77 // Mega8 boot device code
|
||||
#define devtype 0x76 // Mega8 boot device code
|
||||
|
||||
// #define PAGESIZE 64 // Size in Bytes
|
||||
|
||||
|
||||
67
main.c
67
main.c
@ -1,7 +1,7 @@
|
||||
/*****************************************************************************
|
||||
*
|
||||
* AVRPROG compatible boot-loader
|
||||
* Version : 0.7 (Feb. 2005)
|
||||
* Version : 0.75 (Feb. 2006)
|
||||
* Compiler : avr-gcc 3.4.1 / avr-libc 1.0.2
|
||||
* size : depends on features and startup ( minmal features < 512 words)
|
||||
* by : Martin Thomas, Kaiserslautern, Germany
|
||||
@ -12,7 +12,12 @@
|
||||
* owners in source-code and documentation of derived
|
||||
* work. No warranty.
|
||||
*
|
||||
* Tested with ATmega8, ATmega16, ATmega32, ATmega128
|
||||
* Additional code and improvements contributed by:
|
||||
* - Uwe Bonnes
|
||||
* - Bjoern Riemer
|
||||
*
|
||||
*
|
||||
* Tested with ATmega8, ATmega16, ATmega32, ATmega128, AT90CAN128
|
||||
*
|
||||
* - based on the Butterfly Bootloader-Code
|
||||
* Copyright (C) 1996-1998 Atmel Corporation
|
||||
@ -133,9 +138,9 @@ int main(void)
|
||||
|
||||
cli();
|
||||
|
||||
MCUCR = (1<<IVCE);
|
||||
MCUCR = (1<<IVSEL); //move interruptvectors to the Boot sector
|
||||
|
||||
MCUCR = (1<<IVCE); // move interruptvectors to the Boot sector
|
||||
MCUCR = (1<<IVSEL); // device specific !
|
||||
|
||||
BLDDR &= ~(1<<BLPNUM); // set as Input
|
||||
BLPORT |= (1<<BLPNUM); // Enable pullup
|
||||
|
||||
@ -155,8 +160,8 @@ int main(void)
|
||||
{
|
||||
// jump to main app if pin is not grounded
|
||||
BLPORT &= ~(1<<BLPNUM); // set to default
|
||||
MCUCR = (1<<IVCE);
|
||||
MCUCR = (0<<IVSEL); // move interruptvectors to the Application sector
|
||||
MCUCR = (1<<IVCE); // move interruptvectors to the Application sector
|
||||
MCUCR = (0<<IVSEL); // device specific !
|
||||
jump_to_app(); // Jump to application sector
|
||||
}
|
||||
else
|
||||
@ -179,6 +184,7 @@ int main(void)
|
||||
}
|
||||
|
||||
#elif defined(START_SIMPLE)
|
||||
|
||||
if((BLPIN & (1<<BLPNUM)))
|
||||
{
|
||||
// jump to main app if pin is not grounded
|
||||
@ -187,6 +193,53 @@ int main(void)
|
||||
MCUCR = (0<<IVSEL); //move interruptvectors to the Application sector
|
||||
jump_to_app(); // Jump to application sector
|
||||
}
|
||||
|
||||
|
||||
#elif defined(START_WAIT)
|
||||
|
||||
// Timer-Setup for ATmega8
|
||||
// - verify that the configuration is valid for the target AVR
|
||||
|
||||
#define F_OSC XTAL
|
||||
#define UART0_STATUS UCSRA
|
||||
#define UART0_DATA UDR
|
||||
#define MY_WAIT 900
|
||||
// wait ca 1 sec (900ms)
|
||||
TCCR1A = 0; // timer setup
|
||||
// F_OSC / 8 / 1000 -> 1ms
|
||||
#if (((F_OSC / 8 / 1000)*MY_WAIT) < 65535)
|
||||
#warning Information: setting prescaler to 8
|
||||
#define WAIT_VALUE ((F_OSC / 8 / 1000)*MY_WAIT)
|
||||
TCCR1B |= _BV(CS01);
|
||||
#elif ((((F_OSC / 64 / 1000)*MY_WAIT) < 65535))
|
||||
#warning Information: setting prescaler to 64
|
||||
#define WAIT_VALUE ((F_OSC / 64 / 1000)*MY_WAIT)
|
||||
TCCR1B |= _BV(CS01)| _BV(CS00);
|
||||
#elif ((((F_OSC / 256 / 1000)*MY_WAIT) < 65535))
|
||||
#warning Information: setting prescaler to 256
|
||||
#define WAIT_VALUE ((F_OSC / 256 / 1000)*MY_WAIT)
|
||||
TCCR1B |= _BV(CS02);
|
||||
#else //((((F_OSC / 1024 / 1000)*MY_WAIT) < 65535))
|
||||
#warning Information: setting prescaler to 1024
|
||||
#define WAIT_VALUE ((F_OSC / 1024 / 1000)*MY_WAIT)
|
||||
TCCR1B |= _BV(CS00) |_BV(CS02); //1024 prescaler
|
||||
#endif
|
||||
|
||||
while(1){
|
||||
if(UART0_STATUS & (1<<RXC)){
|
||||
if (UART0_DATA == 'S')
|
||||
break;
|
||||
}
|
||||
if (TCNT1 >= WAIT_VALUE){
|
||||
BLPORT &= ~(1<<BLPNUM); // set to default
|
||||
MCUCR = (1<<IVCE);
|
||||
MCUCR = (0<<IVSEL); //move interruptvectors to the Application sector
|
||||
TCCR1B = 0; // timer off
|
||||
jump_to_app(); // Jump to application sector
|
||||
}
|
||||
}
|
||||
TCCR1B = 0; // timer off
|
||||
send_boot();
|
||||
|
||||
#elif defined(START_BOOTICE)
|
||||
#warning "BOOTICE mode - no startup-condition"
|
||||
|
||||
55
makefile
55
makefile
@ -35,13 +35,14 @@
|
||||
|
||||
# MCU name
|
||||
## MCU = atmega16
|
||||
## MCU = atmega8
|
||||
MCU = atmega8
|
||||
## MCU = atmega32
|
||||
MCU = at90can128
|
||||
## MCU = at90can128
|
||||
|
||||
XTAL=16000000
|
||||
|
||||
BAUDRATE=115200
|
||||
#XTAL=2000000UL
|
||||
#BAUDRATE=115200
|
||||
BAUDRATE=9600UL
|
||||
|
||||
#Pin "STARTPIN" on port "STARTPORT" in this port has to grounded
|
||||
# (active low) to start the bootloader
|
||||
@ -63,7 +64,11 @@ BLPNUM = PINB0
|
||||
# parser-loop on reset
|
||||
# XTAL in BOOTICEMODE must be 7372800 Hz to be compatible
|
||||
# with the org. JTAGICE-Firmware */
|
||||
STARTMODE=START_SIMPLE
|
||||
# * WAIT-mode waits 1 sec for the S command if nothing is recived
|
||||
# then the user prog is started ..
|
||||
|
||||
#STARTMODE=START_SIMPLE
|
||||
STARTMODE=START_WAIT
|
||||
##STARTMODE=START_POWERSAVE
|
||||
##STARTMODE=START_BOOTICE
|
||||
|
||||
@ -71,6 +76,7 @@ STARTMODE=START_SIMPLE
|
||||
## NO! BOOTSIZE=_B128
|
||||
## NO! BOOTSIZE=_B256
|
||||
## MAYBE: BOOTSIZE=_B512
|
||||
#BOOTSIZE=_B512
|
||||
BOOTSIZE=_B1024
|
||||
##BOOTSIZE=_B2048
|
||||
|
||||
@ -109,7 +115,8 @@ endif
|
||||
|
||||
|
||||
# Output format. (can be srec, ihex, binary)
|
||||
FORMAT = srec
|
||||
FORMAT = ihex
|
||||
#FORMAT = srec
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = main
|
||||
@ -250,7 +257,7 @@ AVRDUDE_PROGRAMMER = stk500v2
|
||||
|
||||
# com1 = serial port. Use lpt1 to connect to parallel port.
|
||||
#AVRDUDE_PORT = com1 # programmer connected to serial device
|
||||
AVRDUDE_PORT = /dev/ttyS1 # programmer connected to serial device
|
||||
AVRDUDE_PORT = /dev/ttyS0 # programmer connected to serial device
|
||||
|
||||
AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
|
||||
#AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
|
||||
@ -280,25 +287,35 @@ AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
|
||||
# ---------------------------------------------------------------------------
|
||||
|
||||
# Define directories, if needed.
|
||||
DIRAVR = c:/winavr
|
||||
DIRAVRBIN = $(DIRAVR)/bin
|
||||
DIRAVRUTILS = $(DIRAVR)/utils/bin
|
||||
DIRINC = .
|
||||
DIRLIB = $(DIRAVR)/avr/lib
|
||||
#DIRAVR = c:/winavr
|
||||
#DIRAVRBIN = $(DIRAVR)/bin
|
||||
#DIRAVRUTILS = $(DIRAVR)/utils/bin
|
||||
#DIRINC = .
|
||||
#DIRLIB = $(DIRAVR)/avr/lib
|
||||
|
||||
|
||||
# Define programs and commands.
|
||||
#SHELL = $(DIRAVRUTILS)/sh
|
||||
#NM = $(DIRAVRBIN)/avr-nm
|
||||
#CC = $(DIRAVRBIN)/avr-gcc
|
||||
#OBJCOPY = $(DIRAVRBIN)/avr-objcopy
|
||||
#OBJDUMP= $(DIRAVRBIN)/avr-objdump
|
||||
#SIZE = $(DIRAVRBIN)/avr-size
|
||||
#AVRDUDE = $(DIRAVRBIN)/avrdude.sh
|
||||
#REMOVE = rm -f
|
||||
#COPY = cp
|
||||
|
||||
# Define programs and commands.
|
||||
SHELL = sh
|
||||
CC = env WINEDLLOVERRIDES=msvcrt=n /spare/bon/wine/wine/wine c:/WinAVR/bin/avr-gcc
|
||||
OBJCOPY = env WINEDLLOVERRIDES=msvcrt=n /spare/bon/wine/wine/wine c:/WinAVR/bin/avr-objcopy
|
||||
OBJDUMP = env WINEDLLOVERRIDES=msvcrt=n /spare/bon/wine/wine/wine c:/WinAVR/bin/avr-objdump
|
||||
SIZE = env WINEDLLOVERRIDES=msvcrt=n /spare/bon/wine/wine/wine c:/WinAVR/bin/avr-size
|
||||
NM = env WINEDLLOVERRIDES=msvcrt=n /spare/bon/wine/wine/wine c:/WinAVR/bin/avr-nm
|
||||
CC = avr-gcc
|
||||
OBJCOPY = avr-objcopy
|
||||
OBJDUMP = avr-objdump
|
||||
SIZE = avr-size
|
||||
NM = avr-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
COPY = cp
|
||||
|
||||
|
||||
WINSHELL = cmd
|
||||
|
||||
|
||||
# Define Messages
|
||||
|
||||
22
readme.txt
22
readme.txt
@ -10,9 +10,28 @@
|
||||
|
||||
http://www.siwawi.arubi.uni-kl.de/avr_projects
|
||||
|
||||
Addtional code and improvements provided by
|
||||
Uwe Bonnes and Bjoern Riemer.
|
||||
|
||||
|
||||
======================================================
|
||||
|
||||
|
||||
Programming-Software (on the "PC-Side"):
|
||||
|
||||
* AVRProg (included in AVRStudio) available at www.atmel.com.
|
||||
MS-Windows only. AVRProg can be used as stand-alone application.
|
||||
(avrprog.exe)
|
||||
|
||||
* avrdude available at http://savannah.nongnu.org/projects/avrdude/
|
||||
"Multiplattform"
|
||||
|
||||
|
||||
|
||||
09. Feb. 2006 - Version 0.75
|
||||
|
||||
* additional STARTUP_WAIT support contributed by Bjoern Riemer
|
||||
|
||||
18. Aug. 2005 - Version 0.74
|
||||
|
||||
* AT90CAN128 support contributed by Uwe Bonnes
|
||||
@ -144,7 +163,8 @@ not enabled (TODO).
|
||||
or hold the key down until you see the AVRPROG dialog!
|
||||
|
||||
- Start AVRPROG (AVRStuido/Tools or stand-alone) -
|
||||
keep PA7 grounded!
|
||||
keep PA7 grounded! (avrdude is supported too, check
|
||||
the avrdude manual for command-line options).
|
||||
|
||||
- AVRPROG will detect the bootloader, you may release
|
||||
PA7 now
|
||||
|
||||
Loading…
Reference in New Issue
Block a user