lipo-charger/Makefile

52 lines
1.1 KiB
Makefile
Raw Permalink Normal View History

2007-10-03 01:07:05 +02:00
PRG = lipo-charger
OBJ = lipo-charger.o
MCU_TARGET = atmega8
OPTIMIZE = -Os
DEFS =
LIBS =
# You should not have to change anything below here.
CC = avr-gcc
# Override is only needed by avr-lib build system.
override CFLAGS = -g -Wall $(OPTIMIZE) -mmcu=$(MCU_TARGET) $(DEFS)
override LDFLAGS = -Wl,-Map,$(PRG).map
OBJCOPY = avr-objcopy
OBJDUMP = avr-objdump
SIZE = avr-size
all: $(PRG).elf lst text
$(SIZE) -x -A $(PRG).elf
$(PRG).elf: $(OBJ)
$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^ $(LIBS)
clean:
rm -rf *.o *.lst *.map $(PRG).elf *.hex *.bin
lst: $(PRG).lst
%.lst: %.elf
$(OBJDUMP) -h -S $< > $@
# Rules for building the .text rom images
text: hex bin
hex: $(PRG).hex
bin: $(PRG).bin
%.hex: %.elf
$(OBJCOPY) -j .text -j .data -O ihex $< $@
%.bin: %.elf
$(OBJCOPY) -j .text -j .data -O binary $< $@
install: text
2008-03-25 20:15:41 +01:00
# uisp -dprog=avr910 -dserial=/dev/ttyS0 -dspeed=115200 -dpart=M8 --erase --upload if=$(PRG).hex
avrdude -p m8 -c butterfly -b 115200 -P /dev/ttyUSB0 -u -e -U flash:w:$(PRG).hex