From e3803c678d49b7d8e1326c2190ca6e6d9e97de58 Mon Sep 17 00:00:00 2001
From: Olaf Rempel <razzor@kopf-tisch.de>
Date: Wed, 3 Jun 2015 21:46:53 +0200
Subject: [PATCH] use button to toggle output

---
 Makefile | 83 +++++++++++++++++++++++++-------------------------------
 main.c   | 69 ++++++++++++++++++++++++++++++++++++++--------
 2 files changed, 94 insertions(+), 58 deletions(-)

diff --git a/Makefile b/Makefile
index 5cb18a9..68eda08 100644
--- a/Makefile
+++ b/Makefile
@@ -1,62 +1,53 @@
-TARGET     = rc5switch
-TARGET_MCU = attiny24
+CC	:= avr-gcc
+LD	:= avr-ld
+OBJCOPY	:= avr-objcopy
+OBJDUMP	:= avr-objdump
+SIZE	:= avr-size
 
-# ---------------------------------------------------------
+TARGET = rc5switch
+SOURCE = $(wildcard *.c)
+BUILD_DIR = build
 
-BUILD   = build
+AVRDUDE_PROG := -c avr910 -b 115200 -P /dev/ispprog
+#AVRDUDE_PROG := -c dragon_isp -P usb
 
-CC      = avr-gcc
-NM      = avr-nm
-SIZE    = avr-size
-OBJCOPY = avr-objcopy
-OBJDUMP = avr-objdump
+MCU = attiny24
+AVRDUDE_MCU=t24
+# no self programming, 2.7V BOD, 8MHz internal RC Osz.
+AVRDUDE_FUSES=lfuse:w:0xc2:m hfuse:w:0xdd:m efuse:w:0xff:m
 
-override CFLAGS  = -g -Wall -Os -mmcu=$(TARGET_MCU) -Wa,-gstabs,-adhlns=$(BUILD)/$(*D)/$(*F).lst -MMD -MP -MF $(BUILD)/$(*D)/$(*F).d -pipe
-override LDFLAGS = -Wl,-Map=$(BUILD)/$(TARGET).map,--cref
+# ---------------------------------------------------------------------------
 
-# ---------------------------------------------------------
+CFLAGS = -pipe -g -Os -mmcu=$(MCU) -Wall -fdata-sections -ffunction-sections
+CFLAGS += -Wa,-adhlns=$(BUILD_DIR)/$(*D)/$(*F).lst -MMD -MP -MF $(BUILD_DIR)/$(*D)/$(*F).d
+LDFLAGS = -Wl,-Map,$(@:.elf=.map),--cref,--relax,--gc-sections
 
-SRC := $(wildcard *.c)
+# ---------------------------------------------------------------------------
 
-all: $(addprefix $(BUILD)/$(TARGET), .elf .lss .sym .bin .hex _eeprom.bin _eeprom.hex)
-#	@$(SIZE) -x -C --mcu=$(TARGET_MCU) $<
+$(TARGET): $(BUILD_DIR)/$(TARGET).elf
+	@$(SIZE) -B -x --mcu=$(MCU) $<
 
-%.lss: %.elf
-	@$(OBJDUMP) -h -S -C $< > $@
-
-%.sym: %.elf
-	@$(NM) -n $< > $@
-
-%.bin: %.elf
-	@$(OBJCOPY) -j .text -j .data -O binary $< $@
-
-%.hex: %.elf
-	@$(OBJCOPY) -j .text -j .data -O ihex $< $@
-
-%_eeprom.bin: %.elf
-	@$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $< $@ 2> /dev/null
-
-%_eeprom.hex: %.elf
-	@$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $< $@ 2> /dev/null
-
-$(BUILD)/$(TARGET).elf: $(patsubst %,$(BUILD)/%,$(SRC:.c=.o))
+$(BUILD_DIR)/$(TARGET).elf: $(patsubst %,$(BUILD_DIR)/%,$(SOURCE:.c=.o))
 	@echo " Linking file:  $@"
-	@$(CC) $(CFLAGS) $^ -o $@ $(LDFLAGS) > /dev/null
-	@$(SIZE) -x -B $^ $@
+	@$(CC) $(CFLAGS) $(LDFLAGS) -o $@ $^
+	@$(OBJDUMP) -h -S $@ > $(@:.elf=.lss)
+	@$(OBJCOPY) -j .text -j .data -O ihex $@ $(@:.elf=.hex)
+	@$(OBJCOPY) -j .text -j .data -O binary $@ $(@:.elf=.bin)
+	@$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O ihex $@ $(@:.elf=_eeprom.hex)
+	@$(OBJCOPY) -j .eeprom --change-section-lma .eeprom=0 -O binary $@ $(@:.elf=_eeprom.bin)
 
-$(BUILD)/%.o: %.c $(MAKEFILE_LIST)
+$(BUILD_DIR)/%.o: %.c $(MAKEFILE_LIST)
 	@echo " Building file: $<"
-	@$(shell mkdir -p $(BUILD)/$(*D))
-	@$(CC) -c $(CFLAGS) $< -o $@
+	@$(shell test -d $(BUILD_DIR)/$(*D) || mkdir -p $(BUILD_DIR)/$(*D))
+	@$(CC) $(CFLAGS) -o $@ -c $<
+
+include $(shell find $(BUILD_DIR) -name \*.d 2> /dev/null)
 
 clean:
-	rm -rf $(BUILD)
+	rm -rf $(BUILD_DIR)
 
-install: $(BUILD)/$(TARGET).hex $(BUILD)/$(TARGET)_eeprom.hex
-	avrdude -c dragon_isp -P usb -p t24 -U flash:w:$(BUILD)/$(TARGET).hex -U eeprom:w:$(BUILD)/$(TARGET)_eeprom.hex
+install: $(BUILD_DIR)/$(TARGET).elf
+	avrdude $(AVRDUDE_PROG) -p $(AVRDUDE_MCU) -U flash:w:$(<:.elf=.hex) -U eeprom:w:$(<:.elf=_eeprom.hex)
 
-# no self programming, 2.7V BOD, 8MHz internal RC Osz.
 fuses:
-	avrdude -c dragon_isp -P usb -p t24 -U lfuse:w:0xc2:m -U hfuse:w:0xdd:m -U efuse:w:0xff:m
-
--include $(shell find $(BUILD) -name *.d 2> /dev/null)
+	avrdude $(AVRDUDE_PROG) -p $(AVRDUDE_MCU) $(patsubst %,-U %, $(AVRDUDE_FUSES))
diff --git a/main.c b/main.c
index a2829dc..305e048 100644
--- a/main.c
+++ b/main.c
@@ -41,7 +41,6 @@
 #define RC5_CMD_MASK            0x37FF
 #define RC5_COMPLETE            0x8000
 
-#define PROGMODE_CHECK()        (!(PINB & (1<<PINB1)))
 #define OUTPUT_ON()             { PORTB &= ~(1<<PORTB0); }
 #define OUTPUT_OFF()            { PORTB |= (1<<PORTB0); }
 
@@ -58,6 +57,38 @@ struct ee_param params_in_eeprom EEMEM = {
 
 static uint8_t bitcnt;
 static volatile uint16_t value;
+static volatile uint8_t button_debounce;
+static volatile uint8_t button;
+
+ISR(PCINT1_vect)
+{
+        /* get button state */
+        button = !(PINB & (1<<PINB1));
+
+        /* 20 * 2ms = 40ms */
+        button_debounce = 20;
+
+        /* clear and enable overflow interrupt */
+        TIFR0 = (1<<TOV0);
+        TIMSK0 |= (1<<TOIE0);
+
+        /* disable Pinchange interrupt */
+        GIMSK &= ~(1<<PCIE1);
+}
+
+ISR(TIM0_OVF_vect)
+{
+        button_debounce--;
+        if (button_debounce == 0x00)
+        {
+                /* disable overflow interrupt */
+                TIMSK0 &= ~(1<<TOIE0);
+
+                /* clear & enable Pinchange interrupt */
+                GIFR = (1<<PCIF1);
+                GIMSK |= (1<<PCIE1);
+        }
+}
 
 ISR(EXT_INT0_vect)
 {
@@ -109,8 +140,10 @@ int main(int argc, char *argv[])
         PORTB = (1<<PORTB2) | (1<<PORTB1) | (1<<PORTB0);
 
         /* INT0: both edges generate interrupt */
+        /* PB1: enable pin change interrupt */
         MCUCR = (1<<ISC00);
-        GIMSK = (1<<INT0);
+        GIMSK = (1<<INT0) | (1<<PCIE1);
+        PCMSK1 = (1<<PCINT9);
 
         /* Timer0: 8Mhz/64 */
         TCCR0B = (1<<CS01) | (1<<CS00);
@@ -128,6 +161,7 @@ int main(int argc, char *argv[])
         sei();
 
         uint16_t old_value = 0x0000;
+        uint8_t toggle = 0x00;
 
         while (1) {
                 /* wait for next interrupt */
@@ -135,26 +169,37 @@ int main(int argc, char *argv[])
 
                 if (value & RC5_COMPLETE) {
                         /* PROGMODE jumper set? */
-                        if (PROGMODE_CHECK()) {
+                        if (!(PINB & (1<<PINB1))) {
                                 params.rc5cmd = (value & RC5_CMD_MASK);
                                 eeprom_write_block(&params, &params_in_eeprom, sizeof(struct ee_param));
 
                         /* current command matches stored one */
                         } else if (params.rc5cmd == (value & RC5_CMD_MASK) && value != old_value) {
-                                if (params.state) {
-                                        params.state = 0;
-                                        OUTPUT_OFF();
-                                } else {
-                                        params.state = 1;
-                                        OUTPUT_ON();
-                                }
-
-                                eeprom_write_block(&params, &params_in_eeprom, sizeof(struct ee_param));
+                                toggle = 1;
                                 old_value = value;
                         }
 
                         value = 0x0000;
                 }
+                else if (button)
+                {
+                        toggle = 1;
+                        button = 0;
+                }
+
+                if (toggle)
+                {
+                        if (params.state) {
+                                params.state = 0;
+                                OUTPUT_OFF();
+                        } else {
+                                params.state = 1;
+                                OUTPUT_ON();
+                        }
+
+                        eeprom_write_block(&params, &params_in_eeprom, sizeof(struct ee_param));
+                        toggle = 0;
+                }
         }
 
         return 0;