Simplify ACK handling

TWEA bit in TWCR register needs to be cleared to send NACK.
Clear it when too many bytes were received, re-enable it after
when going idle.

Add missing state for prev. send NACK.
Catch all invalid states and reset bus.

TWINT bit needs to be set every time in ISR.
This commit is contained in:
Olaf Rempel 2019-11-03 18:21:12 +01:00
parent eee017dedf
commit b60a0fe735
2 changed files with 15 additions and 16 deletions

View File

@ -10,10 +10,10 @@ Currently the following AVR MCUs are supported:
AVR MCU | Flash bytes used (.text + .data) | Bootloader region size AVR MCU | Flash bytes used (.text + .data) | Bootloader region size
--- | --- | --- --- | --- | ---
atmega8 | 868 (0x364) | 512 words atmega8 | 872 (0x368) | 512 words
atmega88 | 920 (0x398) | 512 words atmega88 | 918 (0x396) | 512 words
atmega168 | 972 (0x3CC) | 512 words atmega168 | 970 (0x3CA) | 512 words
atmega328p | 972 (0x3CC) | 512 words atmega328p | 970 (0x3CA) | 512 words
(Compiled on Ubuntu 18.04 LTS (gcc 5.4.0 / avr-libc 2.0.0) with EEPROM and LED support) (Compiled on Ubuntu 18.04 LTS (gcc 5.4.0 / avr-libc 2.0.0) with EEPROM and LED support)

23
main.c
View File

@ -358,6 +358,7 @@ static uint8_t TWI_data_read(uint8_t bcnt)
ISR(TWI_vect) ISR(TWI_vect)
{ {
static uint8_t bcnt; static uint8_t bcnt;
uint8_t control = TWCR;
switch (TWSR & 0xF8) switch (TWSR & 0xF8)
{ {
@ -365,18 +366,13 @@ ISR(TWI_vect)
case 0x60: case 0x60:
bcnt = 0; bcnt = 0;
LED_RT_ON(); LED_RT_ON();
TWCR |= (1<<TWINT) | (1<<TWEA);
break; break;
/* prev. SLA+W, data received, ACK returned -> receive data and ACK */ /* prev. SLA+W, data received, ACK returned -> receive data and ACK */
case 0x80: case 0x80:
if (TWI_data_write(bcnt++, TWDR)) if (TWI_data_write(bcnt++, TWDR) == 0x00)
{ {
TWCR |= (1<<TWINT) | (1<<TWEA); control &= ~(1<<TWEA);
}
else
{
TWCR |= (1<<TWINT);
bcnt = 0; bcnt = 0;
} }
break; break;
@ -389,22 +385,25 @@ ISR(TWI_vect)
/* prev. SLA+R, data sent, ACK returned -> send data */ /* prev. SLA+R, data sent, ACK returned -> send data */
case 0xB8: case 0xB8:
TWDR = TWI_data_read(bcnt++); TWDR = TWI_data_read(bcnt++);
TWCR |= (1<<TWINT) | (1<<TWEA);
break; break;
/* prev. SLA+W, data received, NACK returned -> IDLE */
case 0x88:
/* STOP or repeated START -> IDLE */ /* STOP or repeated START -> IDLE */
case 0xA0: case 0xA0:
/* prev. SLA+R, data sent, NACK returned -> IDLE */ /* prev. SLA+R, data sent, NACK returned -> IDLE */
case 0xC0: case 0xC0:
LED_RT_OFF(); LED_RT_OFF();
TWCR |= (1<<TWINT) | (1<<TWEA); control |= (1<<TWEA);
break; break;
/* illegal state -> reset hardware */ /* illegal state(s) -> reset hardware */
case 0xF8: default:
TWCR |= (1<<TWINT) | (1<<TWSTO) | (1<<TWEA); control |= (1<<TWSTO);
break; break;
} }
TWCR = (1<<TWINT) | control;
} /* TWI_vect */ } /* TWI_vect */