/****************************************************************************** * * Name: skgehw.h * Project: Gigabit Ethernet Adapters, Common Modules * Version: $Revision: 1.1.1.1 $ * Date: $Date: 2008-12-15 11:39:21 $ * Purpose: Defines and Macros for the Gigabit Ethernet Adapter Product Family * ******************************************************************************/ /****************************************************************************** * * LICENSE: * (C)Copyright 1998-2002 SysKonnect. * (C)Copyright 2002-2006 Marvell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * The information in this file is provided "AS IS" without warranty. * /LICENSE * ******************************************************************************/ #ifndef __INC_SKGEHW_H #define __INC_SKGEHW_H #ifdef __cplusplus extern "C" { #endif /* __cplusplus */ /* defines ********************************************************************/ #define BIT_31 (1UL << 31) #define BIT_30 (1L << 30) #define BIT_29 (1L << 29) #define BIT_28 (1L << 28) #define BIT_27 (1L << 27) #define BIT_26 (1L << 26) #define BIT_25 (1L << 25) #define BIT_24 (1L << 24) #define BIT_23 (1L << 23) #define BIT_22 (1L << 22) #define BIT_21 (1L << 21) #define BIT_20 (1L << 20) #define BIT_19 (1L << 19) #define BIT_18 (1L << 18) #define BIT_17 (1L << 17) #define BIT_16 (1L << 16) #define BIT_15 (1L << 15) #define BIT_14 (1L << 14) #define BIT_13 (1L << 13) #define BIT_12 (1L << 12) #define BIT_11 (1L << 11) #define BIT_10 (1L << 10) #define BIT_9 (1L << 9) #define BIT_8 (1L << 8) #define BIT_7 (1L << 7) #define BIT_6 (1L << 6) #define BIT_5 (1L << 5) #define BIT_4 (1L << 4) #define BIT_3 (1L << 3) #define BIT_2 (1L << 2) #define BIT_1 (1L << 1) #define BIT_0 1L #define BIT_15S (1U << 15) #define BIT_14S (1 << 14) #define BIT_13S (1 << 13) #define BIT_12S (1 << 12) #define BIT_11S (1 << 11) #define BIT_10S (1 << 10) #define BIT_9S (1 << 9) #define BIT_8S (1 << 8) #define BIT_7S (1 << 7) #define BIT_6S (1 << 6) #define BIT_5S (1 << 5) #define BIT_4S (1 << 4) #define BIT_3S (1 << 3) #define BIT_2S (1 << 2) #define BIT_1S (1 << 1) #define BIT_0S 1 #define SHIFT31(x) ((x) << 31) #define SHIFT30(x) ((x) << 30) #define SHIFT29(x) ((x) << 29) #define SHIFT28(x) ((x) << 28) #define SHIFT27(x) ((x) << 27) #define SHIFT26(x) ((x) << 26) #define SHIFT25(x) ((x) << 25) #define SHIFT24(x) ((x) << 24) #define SHIFT23(x) ((x) << 23) #define SHIFT22(x) ((x) << 22) #define SHIFT21(x) ((x) << 21) #define SHIFT20(x) ((x) << 20) #define SHIFT19(x) ((x) << 19) #define SHIFT18(x) ((x) << 18) #define SHIFT17(x) ((x) << 17) #define SHIFT16(x) ((x) << 16) #define SHIFT15(x) ((x) << 15) #define SHIFT14(x) ((x) << 14) #define SHIFT13(x) ((x) << 13) #define SHIFT12(x) ((x) << 12) #define SHIFT11(x) ((x) << 11) #define SHIFT10(x) ((x) << 10) #define SHIFT9(x) ((x) << 9) #define SHIFT8(x) ((x) << 8) #define SHIFT7(x) ((x) << 7) #define SHIFT6(x) ((x) << 6) #define SHIFT5(x) ((x) << 5) #define SHIFT4(x) ((x) << 4) #define SHIFT3(x) ((x) << 3) #define SHIFT2(x) ((x) << 2) #define SHIFT1(x) ((x) << 1) #define SHIFT0(x) ((x) << 0) /* Macro for arbitrary alignment of a given pointer */ #define ALIGN_ADDR( ADDRESS, GRANULARITY ) { \ SK_UPTR addr = (SK_UPTR)(ADDRESS); \ if (addr & ((GRANULARITY)-1)) { \ addr += (GRANULARITY); \ addr &= ~(SK_UPTR)((GRANULARITY)-1); \ ADDRESS = (void *)addr; \ }\ } /* * Configuration Space header * Since this module is used for different OS', those may be * duplicate on some of them (e.g. Linux). But to keep the * common source, we have to live with this... */ #define PCI_VENDOR_ID 0x00 /* 16 bit Vendor ID */ #define PCI_DEVICE_ID 0x02 /* 16 bit Device ID */ #define PCI_COMMAND 0x04 /* 16 bit Command */ #define PCI_STATUS 0x06 /* 16 bit Status */ #define PCI_REV_ID 0x08 /* 8 bit Revision ID */ #if 0 /* uboot */ #define PCI_CLASS_CODE 0x09 /* 24 bit Class Code */ #endif #define PCI_CACHE_LSZ 0x0c /* 8 bit Cache Line Size */ #define PCI_LAT_TIM 0x0d /* 8 bit Latency Timer */ #define PCI_HEADER_T 0x0e /* 8 bit Header Type */ #define PCI_BIST 0x0f /* 8 bit Built-in selftest */ #define PCI_BASE_1ST 0x10 /* 32 bit 1st Base address */ #define PCI_BASE_2ND 0x14 /* 32 bit 2nd Base address */ /* Bytes 0x18..0x2b: reserved */ #define PCI_SUB_VID 0x2c /* 16 bit Subsystem Vendor ID */ #define PCI_SUB_ID 0x2e /* 16 bit Subsystem ID */ #define PCI_BASE_ROM 0x30 /* 32 bit Expansion ROM Base Address */ #define PCI_CAP_PTR 0x34 /* 8 bit Capabilities Pointer */ /* Bytes 0x35..0x3b: reserved */ #define PCI_IRQ_LINE 0x3c /* 8 bit Interrupt Line */ #define PCI_IRQ_PIN 0x3d /* 8 bit Interrupt Pin */ #define PCI_MIN_GNT 0x3e /* 8 bit Min_Gnt */ #define PCI_MAX_LAT 0x3f /* 8 bit Max_Lat */ /* Device Dependent Region */ #define PCI_OUR_REG_1 0x40 /* 32 bit Our Register 1 */ #define PCI_OUR_REG_2 0x44 /* 32 bit Our Register 2 */ /* Power Management Region */ #define PCI_PM_CAP_ID 0x48 /* 8 bit Power Management Cap. ID */ #define PCI_PM_NITEM 0x49 /* 8 bit PM Next Item Pointer */ #define PCI_PM_CAP_REG 0x4a /* 16 bit Power Management Capabilities */ #define PCI_PM_CTL_STS 0x4c /* 16 bit Power Manag. Control/Status */ /* Byte 0x4e: reserved */ #define PCI_PM_DAT_REG 0x4f /* 8 bit Power Manag. Data Register */ /* VPD Region */ #define PCI_VPD_CAP_ID 0x50 /* 8 bit VPD Cap. ID */ #define PCI_VPD_NITEM 0x51 /* 8 bit VPD Next Item Pointer */ #define PCI_VPD_ADR_REG 0x52 /* 16 bit VPD Address Register */ #define PCI_VPD_DAT_REG 0x54 /* 32 bit VPD Data Register */ /* Bytes 0x58..0x59: reserved */ #define PCI_SER_LD_CTRL 0x5a /* 16 bit SEEPROM Loader Ctrl (YUKON only) */ /* Bytes 0x5c..0xfc: used by Yukon-2 */ #define PCI_MSI_CAP_ID 0x5c /* 8 bit MSI Capability ID Register */ #define PCI_MSI_NITEM 0x5d /* 8 bit MSI Next Item Pointer */ #define PCI_MSI_CTRL 0x5e /* 16 bit MSI Message Control */ #define PCI_MSI_ADR_LO 0x60 /* 32 bit MSI Message Address (Lower) */ #define PCI_MSI_ADR_HI 0x64 /* 32 bit MSI Message Address (Upper) */ #define PCI_MSI_DATA 0x68 /* 16 bit MSI Message Data */ /* Bytes 0x6a..0x6b: reserved */ #define PCI_X_CAP_ID 0x6c /* 8 bit PCI-X Capability ID Register */ #define PCI_X_NITEM 0x6d /* 8 bit PCI-X Next Item Pointer */ #define PCI_X_COMMAND 0x6e /* 16 bit PCI-X Command */ #define PCI_X_PE_STAT 0x70 /* 32 bit PCI-X / PE Status */ #define PCI_CAL_CTRL 0x74 /* 16 bit PCI Calibration Control Register */ #define PCI_CAL_STAT 0x76 /* 16 bit PCI Calibration Status Register */ #define PCI_DISC_CNT 0x78 /* 16 bit PCI Discard Counter */ #define PCI_RETRY_CNT 0x7a /* 8 bit PCI Retry Counter */ /* Byte 0x7b: reserved */ #define PCI_OUR_STATUS 0x7c /* 32 bit Adapter Status Register */ #define PCI_OUR_REG_3 0x80 /* 32 bit Our Register 3 (Yukon-ECU only) */ #define PCI_OUR_REG_4 0x84 /* 32 bit Our Register 4 (Yukon-ECU only) */ #define PCI_OUR_REG_5 0x88 /* 32 bit Our Register 5 (Yukon-ECU only) */ /* Bytes 0x8c..0xdf: reserved */ /* PCI Express Capability */ #define PEX_CAP_ID 0xe0 /* 8 bit PEX Capability ID */ #define PEX_NITEM 0xe1 /* 8 bit PEX Next Item Pointer */ #define PEX_CAP_REG 0xe2 /* 16 bit PEX Capability Register */ #define PEX_DEV_CAP 0xe4 /* 32 bit PEX Device Capabilities */ #define PEX_DEV_CTRL 0xe8 /* 16 bit PEX Device Control */ #define PEX_DEV_STAT 0xea /* 16 bit PEX Device Status */ #define PEX_LNK_CAP 0xec /* 32 bit PEX Link Capabilities */ #define PEX_LNK_CTRL 0xf0 /* 16 bit PEX Link Control */ #define PEX_LNK_STAT 0xf2 /* 16 bit PEX Link Status */ /* Bytes 0xf4..0xff: reserved */ /* PCI Express Extended Capabilities */ #define PEX_ADV_ERR_REP 0x100 /* 32 bit PEX Advanced Error Reporting */ #define PEX_UNC_ERR_STAT 0x104 /* 32 bit PEX Uncorr. Errors Status */ #define PEX_UNC_ERR_MASK 0x108 /* 32 bit PEX Uncorr. Errors Mask */ #define PEX_UNC_ERR_SEV 0x10c /* 32 bit PEX Uncorr. Errors Severity */ #define PEX_COR_ERR_STAT 0x110 /* 32 bit PEX Correc. Errors Status */ #define PEX_COR_ERR_MASK 0x114 /* 32 bit PEX Correc. Errors Mask */ #define PEX_ADV_ERR_CAP_C 0x118 /* 32 bit PEX Advanced Error Cap./Ctrl */ #define PEX_HEADER_LOG 0x11c /* 4x32 bit PEX Header Log Register */ /* PCI Express Ack Timer for 1x Link */ #define PEX_ACK_LAT_TOX1 0x228 /* 16 bit PEX Ack Latency Timeout x1 */ #define PEX_ACK_RPLY_TOX1 0x22a /* 16 bit PEX Ack Reply Timeout val x1 */ /* * I2C Address (PCI Config) * * Note: The temperature and voltage sensors are relocated on a different * I2C bus. */ #define I2C_ADDR_VPD 0xa0 /* I2C address for the VPD EEPROM */ /* * Define Bits and Values of the registers */ /* PCI_COMMAND 16 bit Command */ /* Bit 15..11: reserved */ #define PCI_INT_DIS BIT_10S /* Interrupt INTx# disable (PCI 2.3) */ #define PCI_FBTEN BIT_9S /* Fast Back-To-Back enable */ #define PCI_SERREN BIT_8S /* SERR enable */ #define PCI_ADSTEP BIT_7S /* Address Stepping */ #define PCI_PERREN BIT_6S /* Parity Report Response enable */ #define PCI_VGA_SNOOP BIT_5S /* VGA palette snoop */ #define PCI_MWIEN BIT_4S /* Memory write an inv cycl enable */ #define PCI_SCYCEN BIT_3S /* Special Cycle enable */ #define PCI_BMEN BIT_2S /* Bus Master enable */ #define PCI_MEMEN BIT_1S /* Memory Space Access enable */ #define PCI_IOEN BIT_0S /* I/O Space Access enable */ #define PCI_COMMAND_VAL (PCI_INT_DIS | PCI_SERREN | PCI_PERREN | \ PCI_BMEN | PCI_MEMEN | PCI_IOEN) /* PCI_STATUS 16 bit Status */ #define PCI_PERR BIT_15S /* Parity Error */ #define PCI_SERR BIT_14S /* Signaled SERR */ #define PCI_RMABORT BIT_13S /* Received Master Abort */ #define PCI_RTABORT BIT_12S /* Received Target Abort */ /* Bit 11: reserved */ #define PCI_DEVSEL (3<<9) /* Bit 10.. 9: DEVSEL Timing */ #define PCI_DEV_FAST (0<<9) /* fast */ #define PCI_DEV_MEDIUM (1<<9) /* medium */ #define PCI_DEV_SLOW (2<<9) /* slow */ #define PCI_DATAPERR BIT_8S /* DATA Parity error detected */ #define PCI_FB2BCAP BIT_7S /* Fast Back-to-Back Capability */ #define PCI_UDF BIT_6S /* User Defined Features */ #define PCI_66MHZCAP BIT_5S /* 66 MHz PCI bus clock capable */ #define PCI_NEWCAP BIT_4S /* New cap. list implemented */ #define PCI_INT_STAT BIT_3S /* Interrupt INTx# Status (PCI 2.3) */ /* Bit 2.. 0: reserved */ #define PCI_ERRBITS (PCI_PERR | PCI_SERR | PCI_RMABORT | PCI_RTABORT |\ PCI_DATAPERR) /* PCI_CLASS_CODE 24 bit Class Code */ /* Byte 2: Base Class (02) */ /* Byte 1: SubClass (00) */ /* Byte 0: Programming Interface (00) */ /* PCI_CACHE_LSZ 8 bit Cache Line Size */ /* Possible values: 0,2,4,8,16,32,64,128 */ /* PCI_HEADER_T 8 bit Header Type */ #define PCI_HD_MF_DEV BIT_7S /* 0= single, 1= multi-func dev */ #define PCI_HD_TYPE 0x7f /* Bit 6..0: Header Layout (0=normal) */ /* PCI_BIST 8 bit Built-in selftest */ /* Built-in Self test not supported (optional) */ /* PCI_BASE_1ST 32 bit 1st Base address */ #define PCI_MEMSIZE 0x4000L /* use 16 kB Memory Base */ #define PCI_MEMBASE_MSK 0xffffc000L /* Bit 31..14: Memory Base Address */ #define PCI_MEMSIZE_MSK 0x00003ff0L /* Bit 13.. 4: Memory Size Req. */ #define PCI_PREFEN BIT_3 /* Prefetch enable */ #define PCI_MEM_TYP_MSK (3L<<1) /* Bit 2.. 1: Memory Type Mask */ #define PCI_MEMSPACE BIT_0 /* Memory Space Indicator */ #define PCI_MEM32BIT (0L<<1) /* Base addr anywhere in 32 Bit range */ #define PCI_MEM1M (1L<<1) /* Base addr below 1 MegaByte */ #define PCI_MEM64BIT (2L<<1) /* Base addr anywhere in 64 Bit range */ /* PCI_BASE_2ND 32 bit 2nd Base address */ #define PCI_IOBASE 0xffffff00L /* Bit 31.. 8: I/O Base address */ #define PCI_IOSIZE 0x000000fcL /* Bit 7.. 2: I/O Size Requirements */ /* Bit 1: reserved */ #define PCI_IOSPACE BIT_0 /* I/O Space Indicator */ /* PCI_BASE_ROM 32 bit Expansion ROM Base Address */ #define PCI_ROMBASE_MSK 0xfffe0000L /* Bit 31..17: ROM Base address */ #define PCI_ROMBASE_SIZ (0x1cL<<14) /* Bit 16..14: Treat as Base or Size */ #define PCI_ROMSIZE (0x38L<<11) /* Bit 13..11: ROM Size Requirements */ /* Bit 10.. 1: reserved */ #define PCI_ROMEN BIT_0 /* Address Decode enable */ /* Device Dependent Region */ /* PCI_OUR_REG_1 32 bit Our Register 1 */ /* Bit 31..29: reserved */ #define PCI_PHY_COMA BIT_28 /* Set PHY to Coma Mode (YUKON only) */ #define PCI_TEST_CAL BIT_27 /* Test PCI buffer calib. (YUKON only) */ #define PCI_EN_CAL BIT_26 /* Enable PCI buffer calib. (YUKON only) */ #define PCI_VIO BIT_25 /* PCI I/O Voltage, 0 = 3.3V, 1 = 5V */ /* Yukon-2 */ #define PCI_Y2_PIG_ENA BIT_31 /* Enable Plug-in-Go (YUKON-2) */ #define PCI_Y2_DLL_DIS BIT_30 /* Disable PCI DLL (YUKON-2) */ #define PCI_Y2_PHY2_COMA BIT_29 /* Set PHY 2 to Coma Mode (YUKON-2) */ #define PCI_Y2_PHY1_COMA BIT_28 /* Set PHY 1 to Coma Mode (YUKON-2) */ #define PCI_Y2_PHY2_POWD BIT_27 /* Set PHY 2 to Power Down (YUKON-2) */ #define PCI_Y2_PHY1_POWD BIT_26 /* Set PHY 1 to Power Down (YUKON-2) */ /* Bit 25: reserved */ #define PCI_DIS_BOOT BIT_24 /* Disable BOOT via ROM */ #define PCI_EN_IO BIT_23 /* Mapping to I/O space */ #define PCI_EN_FPROM BIT_22 /* Enable FLASH mapping to memory */ /* 1 = Map Flash to memory */ /* 0 = Disable addr. dec */ #define PCI_PAGESIZE (3L<<20) /* Bit 21..20: FLASH Page Size */ #define PCI_PAGE_16 (0L<<20) /* 16 k pages */ #define PCI_PAGE_32K (1L<<20) /* 32 k pages */ #define PCI_PAGE_64K (2L<<20) /* 64 k pages */ #define PCI_PAGE_128K (3L<<20) /* 128 k pages */ /* Bit 19: reserved */ #define PCI_PAGEREG (7L<<16) /* Bit 18..16: Page Register */ #define PCI_NOTAR BIT_15 /* No turnaround cycle */ #define PCI_PEX_LEGNAT BIT_15 /* PEX PM legacy/native mode (YUKON-2) */ #define PCI_FORCE_BE BIT_14 /* Assert all BEs on MR */ #define PCI_DIS_MRL BIT_13 /* Disable Mem Read Line */ #define PCI_DIS_MRM BIT_12 /* Disable Mem Read Multiple */ #define PCI_DIS_MWI BIT_11 /* Disable Mem Write & Invalidate */ #define PCI_DISC_CLS BIT_10 /* Disc: cacheLsz bound */ #define PCI_BURST_DIS BIT_9 /* Burst Disable */ #define PCI_DIS_PCI_CLK BIT_8 /* Disable PCI clock driving */ #define PCI_SKEW_DAS (0xfL<<4) /* Bit 7.. 4: Skew Ctrl, DAS Ext */ #define PCI_SKEW_BASE 0xfL /* Bit 3.. 0: Skew Ctrl, Base */ #define PCI_CLS_OPT BIT_3 /* Cache Line Size opt. PCI-X (YUKON-2) */ /* Yukon-EC Ultra only */ /* Bit 14..10: reserved */ #define PCI_PHY_LNK_TIM_MSK (3L<<8) /* Bit 9.. 8: GPHY Link Trigger Timer */ #define PCI_ENA_L1_EVENT BIT_7 /* Enable PEX L1 Event */ #define PCI_ENA_GPHY_LNK BIT_6 /* Enable PEX L1 on GPHY Link down */ #define PCI_FORCE_PEX_L1 BIT_5 /* Force to PEX L1 */ /* Bit 4.. 0: reserved */ /* PCI_OUR_REG_2 32 bit Our Register 2 */ #define PCI_VPD_WR_THR (0xffL<<24) /* Bit 31..24: VPD Write Threshold */ #define PCI_DEV_SEL (0x7fL<<17) /* Bit 23..17: EEPROM Device Select */ #define PCI_VPD_ROM_SZ (7L<<14) /* Bit 16..14: VPD ROM Size */ /* Bit 13..12: reserved */ #define PCI_PATCH_DIR (0xfL<<8) /* Bit 11.. 8: Ext Patches dir 3..0 */ #define PCI_PATCH_DIR_3 BIT_11 #define PCI_PATCH_DIR_2 BIT_10 #define PCI_PATCH_DIR_1 BIT_9 #define PCI_PATCH_DIR_0 BIT_8 #define PCI_EXT_PATCHS (0xfL<<4) /* Bit 7.. 4: Extended Patches 3..0 */ #define PCI_EXT_PATCH_3 BIT_7 #define PCI_EXT_PATCH_2 BIT_6 #define PCI_EXT_PATCH_1 BIT_5 #define PCI_EXT_PATCH_0 BIT_4 #define PCI_EN_DUMMY_RD BIT_3 /* Enable Dummy Read */ #define PCI_REV_DESC BIT_2 /* Reverse Descriptor Bytes */ /* Bit 1: reserved */ #define PCI_USEDATA64 BIT_0 /* Use 64Bit Data bus ext */ /* Power Management (PM) Region */ /* PCI_PM_CAP_REG 16 bit Power Management Capabilities */ #define PCI_PME_SUP_MSK (0x1f<<11) /* Bit 15..11: PM Event (PME) Supp. Mask */ #define PCI_PME_D3C_SUP BIT_15S /* PME from D3cold Support (if VAUX) */ #define PCI_PME_D3H_SUP BIT_14S /* PME from D3hot Support */ #define PCI_PME_D2_SUP BIT_13S /* PME from D2 Support */ #define PCI_PME_D1_SUP BIT_12S /* PME from D1 Support */ #define PCI_PME_D0_SUP BIT_11S /* PME from D0 Support */ #define PCI_PM_D2_SUP BIT_10S /* D2 Support in 33 MHz mode */ #define PCI_PM_D1_SUP BIT_9S /* D1 Support */ /* Bit 8.. 6: reserved */ #define PCI_PM_DSI BIT_5S /* Device Specific Initialization */ #define PCI_PM_APS BIT_4S /* Auxialiary Power Source */ #define PCI_PME_CLOCK BIT_3S /* PM Event Clock */ #define PCI_PM_VER_MSK 7 /* Bit 2.. 0: PM PCI Spec. version */ /* PCI_PM_CTL_STS 16 bit Power Management Control/Status */ #define PCI_PME_STATUS BIT_15S /* PME Status (YUKON only) */ #define PCI_PM_DAT_SCL (3<<13) /* Bit 14..13: Data Reg. scaling factor */ #define PCI_PM_DAT_SEL (0xf<<9) /* Bit 12.. 9: PM data selector field */ #define PCI_PME_EN BIT_8S /* Enable PME# generation (YUKON only) */ /* Bit 7.. 2: reserved */ #define PCI_PM_STATE_MSK 3 /* Bit 1.. 0: Power Management State */ #define PCI_PM_STATE_D0 0 /* D0: Operational (default) */ #define PCI_PM_STATE_D1 1 /* D1: (YUKON only) */ #define PCI_PM_STATE_D2 2 /* D2: (YUKON only) */ #define PCI_PM_STATE_D3 3 /* D3: HOT, Power Down and Reset */ /* VPD Region */ /* PCI_VPD_ADR_REG 16 bit VPD Address Register */ #define PCI_VPD_FLAG BIT_15S /* starts VPD rd/wr cycle */ #define PCI_VPD_ADR_MSK 0x7fffL /* Bit 14.. 0: VPD Address Mask */ /* PCI_OUR_STATUS 32 bit Adapter Status Register (Yukon-2) */ #define PCI_OS_PCI64B BIT_31 /* Conventional PCI 64 bits Bus */ #define PCI_OS_PCIX BIT_30 /* PCI-X Bus */ #define PCI_OS_MODE_MSK (3L<<28) /* Bit 29..28: PCI-X Bus Mode Mask */ #define PCI_OS_PCI66M BIT_27 /* PCI 66 MHz Bus */ #define PCI_OS_PCI_X BIT_26 /* PCI/PCI-X Bus (0 = PEX) */ #define PCI_OS_DLLE_MSK (3L<<24) /* Bit 25..24: DLL Status Indication */ #define PCI_OS_DLLR_MSK (0xfL<<20) /* Bit 23..20: DLL Row Counters Values */ #define PCI_OS_DLLC_MSK (0xfL<<16) /* Bit 19..16: DLL Col. Counters Values */ /* Bit 15.. 8: reserved */ #define PCI_OS_SPEED(val) ((val & PCI_OS_MODE_MSK) >> 28) /* PCI-X Speed */ /* possible values for the speed field of the register */ #define PCI_OS_SPD_PCI 0 /* PCI Conventional Bus */ #define PCI_OS_SPD_X66 1 /* PCI-X 66MHz Bus */ #define PCI_OS_SPD_X100 2 /* PCI-X 100MHz Bus */ #define PCI_OS_SPD_X133 3 /* PCI-X 133MHz Bus */ /* PCI_OUR_REG_3 32 bit Our Register 3 (Yukon-ECU only) */ /* Bit 31..18: reserved */ #define P_CLK_COR_REGS_D0_DIS BIT_17 /* Disable Clock Core Regs in D0 */ #define P_CLK_PCI_REGS_D0_DIS BIT_16 /* Disable Clock PCI Regs in D0 */ #define P_CLK_COR_YTB_ARB_DIS BIT_15 /* Disable Clock YTB Arbiter */ #define P_CLK_MAC_LNK1_D3_DIS BIT_14 /* Disable Clock MAC Link1 in D3 */ #define P_CLK_COR_LNK1_D0_DIS BIT_13 /* Disable Clock Core Link1 in D0 */ #define P_CLK_MAC_LNK1_D0_DIS BIT_12 /* Disable Clock MAC Link1 in D0 */ #define P_CLK_COR_LNK1_D3_DIS BIT_11 /* Disable Clock Core Link1 in D3 */ #define P_CLK_PCI_MST_ARB_DIS BIT_10 /* Disable Clock PCI Master Arb. */ #define P_CLK_COR_REGS_D3_DIS BIT_9 /* Disable Clock Core Regs in D3 */ #define P_CLK_PCI_REGS_D3_DIS BIT_8 /* Disable Clock PCI Regs in D3 */ #define P_CLK_REF_LNK1_GM_DIS BIT_7 /* Disable Clock Ref. Link1 GMAC */ #define P_CLK_COR_LNK1_GM_DIS BIT_6 /* Disable Clock Core Link1 GMAC */ #define P_CLK_PCI_COMMON_DIS BIT_5 /* Disable Clock PCI Common */ #define P_CLK_COR_COMMON_DIS BIT_4 /* Disable Clock Core Common */ #define P_CLK_PCI_LNK1_BMU_DIS BIT_3 /* Disable Clock PCI Link1 BMU */ #define P_CLK_COR_LNK1_BMU_DIS BIT_2 /* Disable Clock Core Link1 BMU */ #define P_CLK_PCI_LNK1_BIU_DIS BIT_1 /* Disable Clock PCI Link1 BIU */ #define P_CLK_COR_LNK1_BIU_DIS BIT_0 /* Disable Clock Core Link1 BIU */ /* PCI_OUR_REG_4 32 bit Our Register 4 (Yukon-ECU only) */ #define P_PEX_LTSSM_STAT_MSK (0x7fL<<25) /* Bit 31..25: PEX LTSSM Mask */ /* (Link Training & Status State Machine) */ /* Bit 24: reserved */ #define P_TIMER_VALUE_MSK (0xffL<<16) /* Bit 23..16: Timer Value Mask */ #define P_FORCE_ASPM_REQUEST BIT_15 /* Force ASPM Request (A1 only) */ /* (Active State Power Management) */ /* Bit 14..12: Force ASPM on Event */ #define P_ASPM_GPHY_LINK_DOWN BIT_14 /* GPHY Link Down (A1 only) */ #define P_ASPM_INT_FIFO_EMPTY BIT_13 /* Internal FIFO Empty (A1 only) */ #define P_ASPM_CLKRUN_REQUEST BIT_12 /* CLKRUN Request (A1 only) */ /* Bit 11.. 8: reserved */ #define P_ASPM_FORCE_ASPM_L1 BIT_7 /* Force ASPM L1 Enable (A1b only) */ #define P_ASPM_FORCE_ASPM_L0S BIT_6 /* Force ASPM L0s Enable (A1b only) */ #define P_ASPM_FORCE_CLKREQ_PIN BIT_5 /* Force CLKREQn pin low (A1b only) */ #define P_ASPM_FORCE_CLKREQ_ENA BIT_4 /* Force CLKREQ Enable (A1b only) */ #define P_ASPM_CLKREQ_PAD_CTL BIT_3 /* CLKREQ PAD Control (A1 only) */ #define P_ASPM_A1_MODE_SELECT BIT_2 /* A1 Mode Select (A1 only) */ #define P_CLK_GATE_PEX_UNIT_ENA BIT_1 /* Enable Gate PEX Unit Clock */ #define P_CLK_GATE_ROOT_COR_ENA BIT_0 /* Enable Gate Root Core Clock */ #define P_PEX_LTSSM_STAT(x) (SHIFT25(x) & P_PEX_LTSSM_STAT_MSK) #define P_PEX_LTSSM_L1_STAT 0x34 #define P_PEX_LTSSM_DET_STAT 0x01 #define P_ASPM_CONTROL_MSK (P_FORCE_ASPM_REQUEST | P_ASPM_GPHY_LINK_DOWN | \ P_ASPM_CLKRUN_REQUEST | P_ASPM_INT_FIFO_EMPTY) /* PCI_OUR_REG_5 32 bit Our Register 5 (Yukon-ECU only) */ /* Bit 31..27: reserved */ /* Bit 26..16: Release Clock on Event */ #define P_REL_PCIE_RST_DE_ASS BIT_26 /* PCIe Reset De-Asserted */ #define P_REL_GPHY_REC_PACKET BIT_25 /* GPHY Received Packet */ #define P_REL_INT_FIFO_N_EMPTY BIT_24 /* Internal FIFO Not Empty */ #define P_REL_MAIN_PWR_AVAIL BIT_23 /* Main Power Available */ #define P_REL_CLKRUN_REQ_REL BIT_22 /* CLKRUN Request Release */ #define P_REL_PCIE_RESET_ASS BIT_21 /* PCIe Reset Asserted */ #define P_REL_PME_ASSERTED BIT_20 /* PME Asserted */ #define P_REL_PCIE_EXIT_L1_ST BIT_19 /* PCIe Exit L1 State */ #define P_REL_LOADER_NOT_FIN BIT_18 /* EPROM Loader Not Finished */ #define P_REL_PCIE_RX_EX_IDLE BIT_17 /* PCIe Rx Exit Electrical Idle State */ #define P_REL_GPHY_LINK_UP BIT_16 /* GPHY Link Up */ /* Bit 15..11: reserved */ /* Bit 10.. 0: Mask for Gate Clock */ #define P_GAT_PCIE_RST_DE_ASS BIT_10 /* PCIe Reset De-Asserted */ #define P_GAT_GPHY_N_REC_PACKET BIT_9 /* GPHY Not Received Packet */ #define P_GAT_INT_FIFO_EMPTY BIT_8 /* Internal FIFO Empty */ #define P_GAT_MAIN_PWR_N_AVAIL BIT_7 /* Main Power Not Available */ #define P_GAT_CLKRUN_REQ_REL BIT_6 /* CLKRUN Not Requested */ #define P_GAT_PCIE_RESET_ASS BIT_5 /* PCIe Reset Asserted */ #define P_GAT_PME_DE_ASSERTED BIT_4 /* PME De-Asserted */ #define P_GAT_PCIE_ENTER_L1_ST BIT_3 /* PCIe Enter L1 State */ #define P_GAT_LOADER_FINISHED BIT_2 /* EPROM Loader Finished */ #define P_GAT_PCIE_RX_EL_IDLE BIT_1 /* PCIe Rx Electrical Idle State */ #define P_GAT_GPHY_LINK_DOWN BIT_0 /* GPHY Link Down */ /* PEX_DEV_CTRL 16 bit PEX Device Control (Yukon-2) */ /* Bit 15 reserved */ #define PEX_DC_MAX_RRS_MSK (7<<12) /* Bit 14..12: Max. Read Request Size */ #define PEX_DC_EN_NO_SNOOP BIT_11S /* Enable No Snoop */ #define PEX_DC_EN_AUX_POW BIT_10S /* Enable AUX Power */ #define PEX_DC_EN_PHANTOM BIT_9S /* Enable Phantom Functions */ #define PEX_DC_EN_EXT_TAG BIT_8S /* Enable Extended Tag Field */ #define PEX_DC_MAX_PLS_MSK (7<<5) /* Bit 7.. 5: Max. Payload Size Mask */ #define PEX_DC_EN_REL_ORD BIT_4S /* Enable Relaxed Ordering */ #define PEX_DC_EN_UNS_RQ_RP BIT_3S /* Enable Unsupported Request Reporting */ #define PEX_DC_EN_FAT_ER_RP BIT_2S /* Enable Fatal Error Reporting */ #define PEX_DC_EN_NFA_ER_RP BIT_1S /* Enable Non-Fatal Error Reporting */ #define PEX_DC_EN_COR_ER_RP BIT_0S /* Enable Correctable Error Reporting */ #define PEX_DC_MAX_RD_RQ_SIZE(x) (SHIFT12(x) & PEX_DC_MAX_RRS_MSK) /* PEX_LNK_CAP 32 bit PEX Link Capabilities */ #define PEX_CAP_MAX_WI_MSK (0x3f<<4) /* Bit 9.. 4: Max. Link Width Mask */ #define PEX_CAP_MAX_SP_MSK 0x0f /* Bit 3.. 0: Max. Link Speed Mask */ /* PEX_LNK_CTRL 16 bit PEX Link Control (Yukon-2) */ #define PEX_LC_CLK_PM_ENA BIT_8S /* Enable Clock Power Management (CLKREQ) */ /* PEX_LNK_STAT 16 bit PEX Link Status (Yukon-2) */ /* Bit 15..13 reserved */ #define PEX_LS_SLOT_CLK_CFG BIT_12S /* Slot Clock Config */ #define PEX_LS_LINK_TRAIN BIT_11S /* Link Training */ #define PEX_LS_TRAIN_ERROR BIT_10S /* Training Error */ #define PEX_LS_LINK_WI_MSK (0x3f<<4) /* Bit 9.. 4: Neg. Link Width Mask */ #define PEX_LS_LINK_SP_MSK 0x0f /* Bit 3.. 0: Link Speed Mask */ /* PEX_UNC_ERR_STAT 16 bit PEX Uncorrectable Errors Status (Yukon-2) */ /* Bit 31..21 reserved */ #define PEX_UNSUP_REQ BIT_20 /* Unsupported Request Error */ /* ECRC Error (not supported) */ #define PEX_MALFOR_TLP BIT_18 /* Malformed TLP */ #define PEX_RX_OV BIT_17 /* Receiver Overflow (not supported) */ #define PEX_UNEXP_COMP BIT_16 /* Unexpected Completion */ /* Completer Abort (not supported) */ #define PEX_COMP_TO BIT_14 /* Completion Timeout */ #define PEX_FLOW_CTRL_P BIT_13 /* Flow Control Protocol Error */ #define PEX_POIS_TLP BIT_12 /* Poisoned TLP */ /* Bit 11.. 5: reserved */ #define PEX_DATA_LINK_P BIT_4 /* Data Link Protocol Error */ /* Bit 3.. 1: reserved */ /* Training Error (not supported) */ #define PEX_FATAL_ERRORS (PEX_MALFOR_TLP | PEX_FLOW_CTRL_P | PEX_DATA_LINK_P) /* Control Register File (Address Map) */ /* * Bank 0 */ #define B0_RAP 0x0000 /* 8 bit Register Address Port */ /* 0x0001 - 0x0003: reserved */ #define B0_CTST 0x0004 /* 16 bit Control/Status Register */ #define B0_LED 0x0006 /* 8 Bit LED Register */ #define B0_POWER_CTRL 0x0007 /* 8 Bit Power Control reg (YUKON only) */ #define B0_ISRC 0x0008 /* 32 bit Interrupt Source Register */ #define B0_IMSK 0x000c /* 32 bit Interrupt Mask Register */ #define B0_HWE_ISRC 0x0010 /* 32 bit HW Error Interrupt Src Reg */ #define B0_HWE_IMSK 0x0014 /* 32 bit HW Error Interrupt Mask Reg */ #define B0_SP_ISRC 0x0018 /* 32 bit Special Interrupt Source Reg 1 */ /* Special ISR registers (Yukon-2 only) */ #define B0_Y2_SP_ISRC2 0x001c /* 32 bit Special Interrupt Source Reg 2 */ #define B0_Y2_SP_ISRC3 0x0020 /* 32 bit Special Interrupt Source Reg 3 */ #define B0_Y2_SP_EISR 0x0024 /* 32 bit Enter ISR Register */ #define B0_Y2_SP_LISR 0x0028 /* 32 bit Leave ISR Register */ #define B0_Y2_SP_ICR 0x002c /* 32 bit Interrupt Control Register */ /* B0 XMAC 1 registers (GENESIS only) */ #define B0_XM1_IMSK 0x0020 /* 16 bit r/w XMAC 1 Interrupt Mask Register*/ /* 0x0022 - 0x0027: reserved */ #define B0_XM1_ISRC 0x0028 /* 16 bit ro XMAC 1 Interrupt Status Reg */ /* 0x002a - 0x002f: reserved */ #define B0_XM1_PHY_ADDR 0x0030 /* 16 bit r/w XMAC 1 PHY Address Register */ /* 0x0032 - 0x0033: reserved */ #define B0_XM1_PHY_DATA 0x0034 /* 16 bit r/w XMAC 1 PHY Data Register */ /* 0x0036 - 0x003f: reserved */ /* B0 XMAC 2 registers (GENESIS only) */ #define B0_XM2_IMSK 0x0040 /* 16 bit r/w XMAC 2 Interrupt Mask Register*/ /* 0x0042 - 0x0047: reserved */ #define B0_XM2_ISRC 0x0048 /* 16 bit ro XMAC 2 Interrupt Status Reg */ /* 0x004a - 0x004f: reserved */ #define B0_XM2_PHY_ADDR 0x0050 /* 16 bit r/w XMAC 2 PHY Address Register */ /* 0x0052 - 0x0053: reserved */ #define B0_XM2_PHY_DATA 0x0054 /* 16 bit r/w XMAC 2 PHY Data Register */ /* 0x0056 - 0x005f: reserved */ /* BMU Control Status Registers (Yukon and Genesis) */ #define B0_R1_CSR 0x0060 /* 32 bit BMU Ctrl/Stat Rx Queue 1 */ #define B0_R2_CSR 0x0064 /* 32 bit BMU Ctrl/Stat Rx Queue 2 */ #define B0_XS1_CSR 0x0068 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ #define B0_XA1_CSR 0x006c /* 32 bit BMU Ctrl/Stat Async Tx Queue 1*/ #define B0_XS2_CSR 0x0070 /* 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ #define B0_XA2_CSR 0x0074 /* 32 bit BMU Ctrl/Stat Async Tx Queue 2*/ /* 0x0078 - 0x007f: reserved */ /* * Bank 1 * - completely empty (this is the RAP Block window) * Note: if RAP = 1 this page is reserved */ /* * Bank 2 */ /* NA reg = 48 bit Network Address Register, 3x16 or 6x8 bit readable */ #define B2_MAC_1 0x0100 /* NA reg MAC Address 1 */ /* 0x0106 - 0x0107: reserved */ #define B2_MAC_2 0x0108 /* NA reg MAC Address 2 */ /* 0x010e - 0x010f: reserved */ #define B2_MAC_3 0x0110 /* NA reg MAC Address 3 */ /* 0x0116 - 0x0117: reserved */ #define B2_CONN_TYP 0x0118 /* 8 bit Connector type */ #define B2_PMD_TYP 0x0119 /* 8 bit PMD type */ #define B2_MAC_CFG 0x011a /* 8 bit MAC Configuration / Chip Revision */ #define B2_CHIP_ID 0x011b /* 8 bit Chip Identification Number */ /* Eprom registers */ #define B2_E_0 0x011c /* 8 bit EPROM Byte 0 (ext. SRAM size */ /* Yukon and Genesis */ #define B2_E_1 0x011d /* 8 bit EPROM Byte 1 (PHY type) */ #define B2_E_2 0x011e /* 8 bit EPROM Byte 2 */ /* Yukon-2 */ #define B2_Y2_CLK_GATE 0x011d /* 8 bit Clock Gating (Yukon-2) */ #define B2_Y2_HW_RES 0x011e /* 8 bit HW Resources (Yukon-2) */ #define B2_E_3 0x011f /* 8 bit EPROM Byte 3 */ /* Yukon and Genesis */ #define B2_FAR 0x0120 /* 32 bit Flash-Prom Addr Reg/Cnt */ #define B2_FDP 0x0124 /* 8 bit Flash-Prom Data Port */ /* Yukon-2 */ #define B2_Y2_CLK_CTRL 0x0120 /* 32 bit Core Clock Frequency Control */ /* 0x0125 - 0x0127: reserved */ #define B2_LD_CTRL 0x0128 /* 8 bit EPROM loader control register */ #define B2_LD_TEST 0x0129 /* 8 bit EPROM loader test register */ /* 0x012a - 0x012f: reserved */ #define B2_TI_INI 0x0130 /* 32 bit Timer Init Value */ #define B2_TI_VAL 0x0134 /* 32 bit Timer Value */ #define B2_TI_CTRL 0x0138 /* 8 bit Timer Control */ #define B2_TI_TEST 0x0139 /* 8 Bit Timer Test */ /* 0x013a - 0x013f: reserved */ #define B2_IRQM_INI 0x0140 /* 32 bit IRQ Moderation Timer Init Reg.*/ #define B2_IRQM_VAL 0x0144 /* 32 bit IRQ Moderation Timer Value */ #define B2_IRQM_CTRL 0x0148 /* 8 bit IRQ Moderation Timer Control */ #define B2_IRQM_TEST 0x0149 /* 8 bit IRQ Moderation Timer Test */ #define B2_IRQM_MSK 0x014c /* 32 bit IRQ Moderation Mask */ #define B2_IRQM_HWE_MSK 0x0150 /* 32 bit IRQ Moderation HW Error Mask */ /* 0x0154 - 0x0157: reserved */ #define B2_TST_CTRL1 0x0158 /* 8 bit Test Control Register 1 */ #define B2_TST_CTRL2 0x0159 /* 8 bit Test Control Register 2 */ /* 0x015a - 0x015b: reserved */ #define B2_GP_IO 0x015c /* 32 bit General Purpose I/O Register */ #define B2_I2C_CTRL 0x0160 /* 32 bit I2C HW Control Register */ #define B2_I2C_DATA 0x0164 /* 32 bit I2C HW Data Register */ #define B2_I2C_IRQ 0x0168 /* 32 bit I2C HW IRQ Register */ #define B2_I2C_SW 0x016c /* 32 bit I2C SW Port Register */ /* Blink Source Counter (GENESIS only) */ #define B2_BSC_INI 0x0170 /* 32 bit Blink Source Counter Init Val */ #define B2_BSC_VAL 0x0174 /* 32 bit Blink Source Counter Value */ #define B2_BSC_CTRL 0x0178 /* 8 bit Blink Source Counter Control */ #define B2_BSC_STAT 0x0179 /* 8 bit Blink Source Counter Status */ #define B2_BSC_TST 0x017a /* 16 bit Blink Source Counter Test Reg */ /* Yukon-2 */ #define Y2_PEX_PHY_DATA 0x0170 /* 16 bit PEX PHY Data Register */ #define Y2_PEX_PHY_ADDR 0x0172 /* 16 bit PEX PHY Address Register */ /* 0x017c - 0x017f: reserved */ /* * Bank 3 */ /* RAM Random Registers */ #define B3_RAM_ADDR 0x0180 /* 32 bit RAM Address, to read or write */ #define B3_RAM_DATA_LO 0x0184 /* 32 bit RAM Data Word (low dWord) */ #define B3_RAM_DATA_HI 0x0188 /* 32 bit RAM Data Word (high dWord) */ #define B3_RAM_PARITY 0x018c /* 8 bit RAM Parity (Yukon-ECU A1) */ #define SELECT_RAM_BUFFER(rb, addr) (addr | (rb << 6)) /* Yukon-2 only */ /* 0x018c - 0x018f: reserved */ /* RAM Interface Registers */ /* Yukon-2: use SELECT_RAM_BUFFER() to access the RAM buffer */ /* * The HW-Spec. calls this registers Timeout Value 0..11. But this names are * not usable in SW. Please notice these are NOT real timeouts, these are * the number of qWords transferred continuously. */ #define B3_RI_WTO_R1 0x0190 /* 8 bit WR Timeout Queue R1 (TO0) */ #define B3_RI_WTO_XA1 0x0191 /* 8 bit WR Timeout Queue XA1 (TO1) */ #define B3_RI_WTO_XS1 0x0192 /* 8 bit WR Timeout Queue XS1 (TO2) */ #define B3_RI_RTO_R1 0x0193 /* 8 bit RD Timeout Queue R1 (TO3) */ #define B3_RI_RTO_XA1 0x0194 /* 8 bit RD Timeout Queue XA1 (TO4) */ #define B3_RI_RTO_XS1 0x0195 /* 8 bit RD Timeout Queue XS1 (TO5) */ #define B3_RI_WTO_R2 0x0196 /* 8 bit WR Timeout Queue R2 (TO6) */ #define B3_RI_WTO_XA2 0x0197 /* 8 bit WR Timeout Queue XA2 (TO7) */ #define B3_RI_WTO_XS2 0x0198 /* 8 bit WR Timeout Queue XS2 (TO8) */ #define B3_RI_RTO_R2 0x0199 /* 8 bit RD Timeout Queue R2 (TO9) */ #define B3_RI_RTO_XA2 0x019a /* 8 bit RD Timeout Queue XA2 (TO10)*/ #define B3_RI_RTO_XS2 0x019b /* 8 bit RD Timeout Queue XS2 (TO11)*/ #define B3_RI_TO_VAL 0x019c /* 8 bit Current Timeout Count Val */ /* 0x019d - 0x019f: reserved */ #define B3_RI_CTRL 0x01a0 /* 16 bit RAM Interface Control Register */ #define B3_RI_TEST 0x01a2 /* 8 bit RAM Interface Test Register */ /* 0x01a3 - 0x01af: reserved */ /* MAC Arbiter Registers (GENESIS only) */ /* these are the no. of qWord transferred continuously and NOT real timeouts */ #define B3_MA_TOINI_RX1 0x01b0 /* 8 bit Timeout Init Val Rx Path MAC 1 */ #define B3_MA_TOINI_RX2 0x01b1 /* 8 bit Timeout Init Val Rx Path MAC 2 */ #define B3_MA_TOINI_TX1 0x01b2 /* 8 bit Timeout Init Val Tx Path MAC 1 */ #define B3_MA_TOINI_TX2 0x01b3 /* 8 bit Timeout Init Val Tx Path MAC 2 */ #define B3_MA_TOVAL_RX1 0x01b4 /* 8 bit Timeout Value Rx Path MAC 1 */ #define B3_MA_TOVAL_RX2 0x01b5 /* 8 bit Timeout Value Rx Path MAC 1 */ #define B3_MA_TOVAL_TX1 0x01b6 /* 8 bit Timeout Value Tx Path MAC 2 */ #define B3_MA_TOVAL_TX2 0x01b7 /* 8 bit Timeout Value Tx Path MAC 2 */ #define B3_MA_TO_CTRL 0x01b8 /* 16 bit MAC Arbiter Timeout Ctrl Reg */ #define B3_MA_TO_TEST 0x01ba /* 16 bit MAC Arbiter Timeout Test Reg */ /* 0x01bc - 0x01bf: reserved */ #define B3_MA_RCINI_RX1 0x01c0 /* 8 bit Recovery Init Val Rx Path MAC 1 */ #define B3_MA_RCINI_RX2 0x01c1 /* 8 bit Recovery Init Val Rx Path MAC 2 */ #define B3_MA_RCINI_TX1 0x01c2 /* 8 bit Recovery Init Val Tx Path MAC 1 */ #define B3_MA_RCINI_TX2 0x01c3 /* 8 bit Recovery Init Val Tx Path MAC 2 */ #define B3_MA_RCVAL_RX1 0x01c4 /* 8 bit Recovery Value Rx Path MAC 1 */ #define B3_MA_RCVAL_RX2 0x01c5 /* 8 bit Recovery Value Rx Path MAC 1 */ #define B3_MA_RCVAL_TX1 0x01c6 /* 8 bit Recovery Value Tx Path MAC 2 */ #define B3_MA_RCVAL_TX2 0x01c7 /* 8 bit Recovery Value Tx Path MAC 2 */ #define B3_MA_RC_CTRL 0x01c8 /* 16 bit MAC Arbiter Recovery Ctrl Reg */ #define B3_MA_RC_TEST 0x01ca /* 16 bit MAC Arbiter Recovery Test Reg */ /* 0x01cc - 0x01cf: reserved */ /* Packet Arbiter Registers (GENESIS only) */ /* these are real timeouts */ #define B3_PA_TOINI_RX1 0x01d0 /* 16 bit Timeout Init Val Rx Path MAC 1 */ /* 0x01d2 - 0x01d3: reserved */ #define B3_PA_TOINI_RX2 0x01d4 /* 16 bit Timeout Init Val Rx Path MAC 2 */ /* 0x01d6 - 0x01d7: reserved */ #define B3_PA_TOINI_TX1 0x01d8 /* 16 bit Timeout Init Val Tx Path MAC 1 */ /* 0x01da - 0x01db: reserved */ #define B3_PA_TOINI_TX2 0x01dc /* 16 bit Timeout Init Val Tx Path MAC 2 */ /* 0x01de - 0x01df: reserved */ #define B3_PA_TOVAL_RX1 0x01e0 /* 16 bit Timeout Val Rx Path MAC 1 */ /* 0x01e2 - 0x01e3: reserved */ #define B3_PA_TOVAL_RX2 0x01e4 /* 16 bit Timeout Val Rx Path MAC 2 */ /* 0x01e6 - 0x01e7: reserved */ #define B3_PA_TOVAL_TX1 0x01e8 /* 16 bit Timeout Val Tx Path MAC 1 */ /* 0x01ea - 0x01eb: reserved */ #define B3_PA_TOVAL_TX2 0x01ec /* 16 bit Timeout Val Tx Path MAC 2 */ /* 0x01ee - 0x01ef: reserved */ #define B3_PA_CTRL 0x01f0 /* 16 bit Packet Arbiter Ctrl Register */ #define B3_PA_TEST 0x01f2 /* 16 bit Packet Arbiter Test Register */ /* 0x01f4 - 0x01ff: reserved */ /* * Bank 4 - 5 */ /* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ #define TXA_ITI_INI 0x0200 /* 32 bit Tx Arb Interval Timer Init Val*/ #define TXA_ITI_VAL 0x0204 /* 32 bit Tx Arb Interval Timer Value */ #define TXA_LIM_INI 0x0208 /* 32 bit Tx Arb Limit Counter Init Val */ #define TXA_LIM_VAL 0x020c /* 32 bit Tx Arb Limit Counter Value */ #define TXA_CTRL 0x0210 /* 8 bit Tx Arbiter Control Register */ #define TXA_TEST 0x0211 /* 8 bit Tx Arbiter Test Register */ #define TXA_STAT 0x0212 /* 8 bit Tx Arbiter Status Register */ /* 0x0213 - 0x021f: reserved */ /* RSS key registers for Yukon-2 Family */ #define B4_RSS_KEY 0x0220 /* 4x32 bit RSS Key register (Yukon-2) */ /* RSS key register offsets */ #define KEY_IDX_0 0 /* offset for location of KEY 0 */ #define KEY_IDX_1 4 /* offset for location of KEY 1 */ #define KEY_IDX_2 8 /* offset for location of KEY 2 */ #define KEY_IDX_3 12 /* offset for location of KEY 3 */ /* 0x0280 - 0x0292: MAC 2 */ /* 0x0213 - 0x027f: reserved */ /* * Bank 6 */ /* External registers (GENESIS only) */ #define B6_EXT_REG 0x0300 /* * Bank 7 */ /* This is a copy of the Configuration register file (lower half) */ #define B7_CFG_SPC 0x0380 /* * Bank 8 - 15 */ /* Receive and Transmit Queue Registers, use Q_ADDR() to access */ #define B8_Q_REGS 0x0400 /* Queue Register Offsets, use Q_ADDR() to access */ #define Q_D 0x00 /* 8*32 bit Current Descriptor */ #define Q_DA_L 0x20 /* 32 bit Current Descriptor Address Low DWord */ #define Q_DA_H 0x24 /* 32 bit Current Descriptor Address High DWord */ #define Q_AC_L 0x28 /* 32 bit Current Address Counter Low DWord */ #define Q_AC_H 0x2c /* 32 bit Current Address Counter High DWord */ #define Q_BC 0x30 /* 32 bit Current Byte Counter */ #define Q_CSR 0x34 /* 32 bit BMU Control/Status Register */ #define Q_F 0x38 /* 32 bit Flag Register */ #define Q_T1 0x3c /* 32 bit Test Register 1 */ #define Q_T1_TR 0x3c /* 8 bit Test Register 1 Transfer SM */ #define Q_T1_WR 0x3d /* 8 bit Test Register 1 Write Descriptor SM */ #define Q_T1_RD 0x3e /* 8 bit Test Register 1 Read Descriptor SM */ #define Q_T1_SV 0x3f /* 8 bit Test Register 1 Supervisor SM */ #define Q_T2 0x40 /* 32 bit Test Register 2 */ #define Q_T3 0x44 /* 32 bit Test Register 3 */ /* Yukon-2 */ #define Q_DONE 0x24 /* 16 bit Done Index */ #define Q_WM 0x40 /* 16 bit FIFO Watermark */ #define Q_AL 0x42 /* 8 bit FIFO Alignment */ /* 0x43: reserved */ /* RX Queue */ #define Q_RX_RSP 0x44 /* 16 bit FIFO Read Shadow Pointer */ #define Q_RX_RSL 0x46 /* 8 bit FIFO Read Shadow Level */ /* 0x47: reserved */ #define Q_RX_RP 0x48 /* 8 bit FIFO Read Pointer */ /* 0x49: reserved */ #define Q_RX_RL 0x4a /* 8 bit FIFO Read Level */ /* 0x4b: reserved */ #define Q_RX_WP 0x4c /* 8 bit FIFO Write Pointer */ #define Q_RX_WSP 0x4d /* 8 bit FIFO Write Shadow Pointer */ #define Q_RX_WL 0x4e /* 8 bit FIFO Write Level */ #define Q_RX_WSL 0x4f /* 8 bit FIFO Write Shadow Level */ /* TX Queue */ #define Q_TX_WSP 0x44 /* 16 bit FIFO Write Shadow Pointer */ #define Q_TX_WSL 0x46 /* 8 bit FIFO Write Shadow Level */ /* 0x47: reserved */ #define Q_TX_WP 0x48 /* 8 bit FIFO Write Pointer */ /* 0x49: reserved */ #define Q_TX_WL 0x4a /* 8 bit FIFO Write Level */ /* 0x4b: reserved */ #define Q_TX_RP 0x4c /* 8 bit FIFO Read Pointer */ /* 0x4d: reserved */ #define Q_TX_RL 0x4e /* 8 bit FIFO Read Level */ /* 0x4f: reserved */ /* 0x48 - 0x7f: reserved */ /* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/ #define Y2_B8_PREF_REGS 0x0450 #define PREF_UNIT_CTRL_REG 0x00 /* 32 bit Prefetch Control register */ #define PREF_UNIT_LAST_IDX_REG 0x04 /* 16 bit Last Index */ #define PREF_UNIT_ADDR_LOW_REG 0x08 /* 32 bit List start addr, low part */ #define PREF_UNIT_ADDR_HI_REG 0x0c /* 32 bit List start addr, high part*/ #define PREF_UNIT_GET_IDX_REG 0x10 /* 16 bit Get Index */ #define PREF_UNIT_PUT_IDX_REG 0x14 /* 16 bit Put Index */ #define PREF_UNIT_FIFO_WP_REG 0x20 /* 8 bit FIFO write pointer */ #define PREF_UNIT_FIFO_RP_REG 0x24 /* 8 bit FIFO read pointer */ #define PREF_UNIT_FIFO_WM_REG 0x28 /* 8 bit FIFO watermark */ #define PREF_UNIT_FIFO_LEV_REG 0x2c /* 8 bit FIFO level */ #define PREF_UNIT_MASK_IDX 0x0fff /* * Bank 16 - 23 */ /* RAM Buffer Registers */ #define B16_RAM_REGS 0x0800 /* RAM Buffer Register Offsets, use RB_ADDR() to access */ #define RB_START 0x00 /* 32 bit RAM Buffer Start Address */ #define RB_END 0x04 /* 32 bit RAM Buffer End Address */ #define RB_WP 0x08 /* 32 bit RAM Buffer Write Pointer */ #define RB_RP 0x0c /* 32 bit RAM Buffer Read Pointer */ #define RB_RX_UTPP 0x10 /* 32 bit Rx Upper Threshold, Pause Packet */ #define RB_RX_LTPP 0x14 /* 32 bit Rx Lower Threshold, Pause Packet */ #define RB_RX_UTHP 0x18 /* 32 bit Rx Upper Threshold, High Prio */ #define RB_RX_LTHP 0x1c /* 32 bit Rx Lower Threshold, High Prio */ /* 0x10 - 0x1f: reserved at Tx RAM Buffer Registers */ #define RB_PC 0x20 /* 32 bit RAM Buffer Packet Counter */ #define RB_LEV 0x24 /* 32 bit RAM Buffer Level Register */ #define RB_CTRL 0x28 /* 32 bit RAM Buffer Control Register */ #define RB_TST1 0x29 /* 8 bit RAM Buffer Test Register 1 */ #define RB_TST2 0x2a /* 8 bit RAM Buffer Test Register 2 */ /* 0x2b - 0x7f: reserved */ /* * Bank 24 */ /* * Receive MAC FIFO, Receive LED, and Link_Sync regs (GENESIS only) * use MR_ADDR() to access */ #define RX_MFF_EA 0x0c00 /* 32 bit Receive MAC FIFO End Address */ #define RX_MFF_WP 0x0c04 /* 32 bit Receive MAC FIFO Write Pointer */ /* 0x0c08 - 0x0c0b: reserved */ #define RX_MFF_RP 0x0c0c /* 32 bit Receive MAC FIFO Read Pointer */ #define RX_MFF_PC 0x0c10 /* 32 bit Receive MAC FIFO Packet Cnt */ #define RX_MFF_LEV 0x0c14 /* 32 bit Receive MAC FIFO Level */ #define RX_MFF_CTRL1 0x0c18 /* 16 bit Receive MAC FIFO Control Reg 1*/ #define RX_MFF_STAT_TO 0x0c1a /* 8 bit Receive MAC Status Timeout */ #define RX_MFF_TIST_TO 0x0c1b /* 8 bit Receive MAC Time Stamp Timeout */ #define RX_MFF_CTRL2 0x0c1c /* 8 bit Receive MAC FIFO Control Reg 2*/ #define RX_MFF_TST1 0x0c1d /* 8 bit Receive MAC FIFO Test Reg 1 */ #define RX_MFF_TST2 0x0c1e /* 8 bit Receive MAC FIFO Test Reg 2 */ /* 0x0c1f: reserved */ #define RX_LED_INI 0x0c20 /* 32 bit Receive LED Cnt Init Value */ #define RX_LED_VAL 0x0c24 /* 32 bit Receive LED Cnt Current Value */ #define RX_LED_CTRL 0x0c28 /* 8 bit Receive LED Cnt Control Reg */ #define RX_LED_TST 0x0c29 /* 8 bit Receive LED Cnt Test Register */ /* 0x0c2a - 0x0c2f: reserved */ #define LNK_SYNC_INI 0x0c30 /* 32 bit Link Sync Cnt Init Value */ #define LNK_SYNC_VAL 0x0c34 /* 32 bit Link Sync Cnt Current Value */ #define LNK_SYNC_CTRL 0x0c38 /* 8 bit Link Sync Cnt Control Register */ #define LNK_SYNC_TST 0x0c39 /* 8 bit Link Sync Cnt Test Register */ /* 0x0c3a - 0x0c3b: reserved */ #define LNK_LED_REG 0x0c3c /* 8 bit Link LED Register */ /* 0x0c3d - 0x0c3f: reserved */ /* Receive GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ #define RX_GMF_EA 0x0c40 /* 32 bit Rx GMAC FIFO End Address */ #define RX_GMF_AF_THR 0x0c44 /* 32 bit Rx GMAC FIFO Almost Full Thresh. */ #define RX_GMF_CTRL_T 0x0c48 /* 32 bit Rx GMAC FIFO Control/Test */ #define RX_GMF_FL_MSK 0x0c4c /* 32 bit Rx GMAC FIFO Flush Mask */ #define RX_GMF_FL_THR 0x0c50 /* 32 bit Rx GMAC FIFO Flush Threshold */ #define RX_GMF_TR_THR 0x0c54 /* 32 bit Rx Truncation Threshold (Yukon-2) */ #define RX_GMF_UP_THR 0x0c58 /* 16 bit Rx Upper Pause Thr (Yukon-EC_U) */ #define RX_GMF_LP_THR 0x0c5a /* 16 bit Rx Lower Pause Thr (Yukon-EC_U) */ #define RX_GMF_VLAN 0x0c5c /* 32 bit Rx VLAN Type Register (Yukon-2) */ #define RX_GMF_WP 0x0c60 /* 32 bit Rx GMAC FIFO Write Pointer */ /* 0x0c64 - 0x0c67: reserved */ #define RX_GMF_WLEV 0x0c68 /* 32 bit Rx GMAC FIFO Write Level */ /* 0x0c6c - 0x0c6f: reserved */ #define RX_GMF_RP 0x0c70 /* 32 bit Rx GMAC FIFO Read Pointer */ /* 0x0c74 - 0x0c77: reserved */ #define RX_GMF_RLEV 0x0c78 /* 32 bit Rx GMAC FIFO Read Level */ /* 0x0c7c - 0x0c7f: reserved */ /* * Bank 25 */ /* 0x0c80 - 0x0cbf: MAC 2 */ /* 0x0cc0 - 0x0cff: reserved */ /* * Bank 26 */ /* * Transmit MAC FIFO and Transmit LED Registers (GENESIS only), * use MR_ADDR() to access */ #define TX_MFF_EA 0x0d00 /* 32 bit Transmit MAC FIFO End Address */ #define TX_MFF_WP 0x0d04 /* 32 bit Transmit MAC FIFO WR Pointer */ #define TX_MFF_WSP 0x0d08 /* 32 bit Transmit MAC FIFO WR Shadow Ptr */ #define TX_MFF_RP 0x0d0c /* 32 bit Transmit MAC FIFO RD Pointer */ #define TX_MFF_PC 0x0d10 /* 32 bit Transmit MAC FIFO Packet Cnt */ #define TX_MFF_LEV 0x0d14 /* 32 bit Transmit MAC FIFO Level */ #define TX_MFF_CTRL1 0x0d18 /* 16 bit Transmit MAC FIFO Ctrl Reg 1 */ #define TX_MFF_WAF 0x0d1a /* 8 bit Transmit MAC Wait after flush */ /* 0x0c1b: reserved */ #define TX_MFF_CTRL2 0x0d1c /* 8 bit Transmit MAC FIFO Ctrl Reg 2 */ #define TX_MFF_TST1 0x0d1d /* 8 bit Transmit MAC FIFO Test Reg 1 */ #define TX_MFF_TST2 0x0d1e /* 8 bit Transmit MAC FIFO Test Reg 2 */ /* 0x0d1f: reserved */ #define TX_LED_INI 0x0d20 /* 32 bit Transmit LED Cnt Init Value */ #define TX_LED_VAL 0x0d24 /* 32 bit Transmit LED Cnt Current Val */ #define TX_LED_CTRL 0x0d28 /* 8 bit Transmit LED Cnt Control Reg */ #define TX_LED_TST 0x0d29 /* 8 bit Transmit LED Cnt Test Reg */ /* 0x0d2a - 0x0d3f: reserved */ /* Transmit GMAC FIFO (YUKON and Yukon-2), use MR_ADDR() to access */ #define TX_GMF_EA 0x0d40 /* 32 bit Tx GMAC FIFO End Address */ #define TX_GMF_AE_THR 0x0d44 /* 32 bit Tx GMAC FIFO Almost Empty Thresh. */ #define TX_GMF_CTRL_T 0x0d48 /* 32 bit Tx GMAC FIFO Control/Test */ /* 0x0d4c - 0x0d5b: reserved */ #define TX_GMF_VLAN 0x0d5c /* 32 bit Tx VLAN Type Register (Yukon-2) */ #define TX_GMF_WP 0x0d60 /* 32 bit Tx GMAC FIFO Write Pointer */ #define TX_GMF_WSP 0x0d64 /* 32 bit Tx GMAC FIFO Write Shadow Pointer */ #define TX_GMF_WLEV 0x0d68 /* 32 bit Tx GMAC FIFO Write Level */ /* 0x0d6c - 0x0d6f: reserved */ #define TX_GMF_RP 0x0d70 /* 32 bit Tx GMAC FIFO Read Pointer */ #define TX_GMF_RSTP 0x0d74 /* 32 bit Tx GMAC FIFO Restart Pointer */ #define TX_GMF_RLEV 0x0d78 /* 32 bit Tx GMAC FIFO Read Level */ /* 0x0d7c - 0x0d7f: reserved */ /* * Bank 27 */ /* 0x0d80 - 0x0dbf: MAC 2 */ /* 0x0daa - 0x0dff: reserved */ /* * Bank 28 */ /* Descriptor Poll Timer Registers */ #define B28_DPT_INI 0x0e00 /* 24 bit Descriptor Poll Timer Init Val */ #define B28_DPT_VAL 0x0e04 /* 24 bit Descriptor Poll Timer Curr Val */ #define B28_DPT_CTRL 0x0e08 /* 8 bit Descriptor Poll Timer Ctrl Reg */ /* 0x0e09: reserved */ #define B28_DPT_TST 0x0e0a /* 8 bit Descriptor Poll Timer Test Reg */ /* 0x0e0b: reserved */ /* Time Stamp Timer Registers (YUKON only) */ /* 0x0e10: reserved */ #define GMAC_TI_ST_VAL 0x0e14 /* 32 bit Time Stamp Timer Curr Val */ #define GMAC_TI_ST_CTRL 0x0e18 /* 8 bit Time Stamp Timer Ctrl Reg */ /* 0x0e19: reserved */ #define GMAC_TI_ST_TST 0x0e1a /* 8 bit Time Stamp Timer Test Reg */ /* 0x0e1b - 0x0e1f: reserved */ /* Polling Unit Registers (Yukon-2 only) */ #define POLL_CTRL 0x0e20 /* 32 bit Polling Unit Control Reg */ #define POLL_LAST_IDX 0x0e24 /* 16 bit Polling Unit List Last Index */ /* 0x0e26 - 0x0e27: reserved */ #define POLL_LIST_ADDR_LO 0x0e28 /* 32 bit Poll. List Start Addr (low) */ #define POLL_LIST_ADDR_HI 0x0e2c /* 32 bit Poll. List Start Addr (high) */ /* 0x0e30 - 0x0e3f: reserved */ /* ASF Subsystem Registers (Yukon-2 only) */ #define B28_Y2_SMB_CONFIG 0x0e40 /* 32 bit ASF SMBus Config Register */ #define B28_Y2_SMB_CSD_REG 0x0e44 /* 32 bit ASF SMB Control/Status/Data */ /* 0x0e48 - 0x0e5f: reserved */ #define B28_Y2_ASF_IRQ_V_BASE 0x0e60 /* 32 bit ASF IRQ Vector Base */ /* 0x0e64 - 0x0e67: reserved */ #define B28_Y2_ASF_STAT_CMD 0x0e68 /* 32 bit ASF Status and Command Reg */ #define B28_Y2_ASF_HOST_COM 0x0e6c /* 32 bit ASF Host Communication Reg */ #define B28_Y2_DATA_REG_1 0x0e70 /* 32 bit ASF/Host Data Register 1 */ #define B28_Y2_DATA_REG_2 0x0e74 /* 32 bit ASF/Host Data Register 2 */ #define B28_Y2_DATA_REG_3 0x0e78 /* 32 bit ASF/Host Data Register 3 */ #define B28_Y2_DATA_REG_4 0x0e7c /* 32 bit ASF/Host Data Register 4 */ /* * Bank 29 */ /* Status BMU Registers (Yukon-2 only)*/ #define STAT_CTRL 0x0e80 /* 32 bit Status BMU Control Reg */ #define STAT_LAST_IDX 0x0e84 /* 16 bit Status BMU Last Index */ /* 0x0e85 - 0x0e86: reserved */ #define STAT_LIST_ADDR_LO 0x0e88 /* 32 bit Status List Start Addr (low) */ #define STAT_LIST_ADDR_HI 0x0e8c /* 32 bit Status List Start Addr (high) */ #define STAT_TXA1_RIDX 0x0e90 /* 16 bit Status TxA1 Report Index Reg */ #define STAT_TXS1_RIDX 0x0e92 /* 16 bit Status TxS1 Report Index Reg */ #define STAT_TXA2_RIDX 0x0e94 /* 16 bit Status TxA2 Report Index Reg */ #define STAT_TXS2_RIDX 0x0e96 /* 16 bit Status TxS2 Report Index Reg */ #define STAT_TX_IDX_TH 0x0e98 /* 16 bit Status Tx Index Threshold Reg */ /* 0x0e9a - 0x0e9b: reserved */ #define STAT_PUT_IDX 0x0e9c /* 16 bit Status Put Index Reg */ /* 0x0e9e - 0x0e9f: reserved */ /* FIFO Control/Status Registers (Yukon-2 only) */ #define STAT_FIFO_WP 0x0ea0 /* 8 bit Status FIFO Write Pointer Reg */ /* 0x0ea1 - 0x0ea3: reserved */ #define STAT_FIFO_RP 0x0ea4 /* 8 bit Status FIFO Read Pointer Reg */ /* 0x0ea5: reserved */ #define STAT_FIFO_RSP 0x0ea6 /* 8 bit Status FIFO Read Shadow Ptr */ /* 0x0ea7: reserved */ #define STAT_FIFO_LEVEL 0x0ea8 /* 8 bit Status FIFO Level Reg */ /* 0x0ea9: reserved */ #define STAT_FIFO_SHLVL 0x0eaa /* 8 bit Status FIFO Shadow Level Reg */ /* 0x0eab: reserved */ #define STAT_FIFO_WM 0x0eac /* 8 bit Status FIFO Watermark Reg */ #define STAT_FIFO_ISR_WM 0x0ead /* 8 bit Status FIFO ISR Watermark Reg */ /* 0x0eae - 0x0eaf: reserved */ /* Level and ISR Timer Registers (Yukon-2 only) */ #define STAT_LEV_TIMER_INI 0x0eb0 /* 32 bit Level Timer Init. Value Reg */ #define STAT_LEV_TIMER_CNT 0x0eb4 /* 32 bit Level Timer Counter Reg */ #define STAT_LEV_TIMER_CTRL 0x0eb8 /* 8 bit Level Timer Control Reg */ #define STAT_LEV_TIMER_TEST 0x0eb9 /* 8 bit Level Timer Test Reg */ /* 0x0eba - 0x0ebf: reserved */ #define STAT_TX_TIMER_INI 0x0ec0 /* 32 bit Tx Timer Init. Value Reg */ #define STAT_TX_TIMER_CNT 0x0ec4 /* 32 bit Tx Timer Counter Reg */ #define STAT_TX_TIMER_CTRL 0x0ec8 /* 8 bit Tx Timer Control Reg */ #define STAT_TX_TIMER_TEST 0x0ec9 /* 8 bit Tx Timer Test Reg */ /* 0x0eca - 0x0ecf: reserved */ #define STAT_ISR_TIMER_INI 0x0ed0 /* 32 bit ISR Timer Init. Value Reg */ #define STAT_ISR_TIMER_CNT 0x0ed4 /* 32 bit ISR Timer Counter Reg */ #define STAT_ISR_TIMER_CTRL 0x0ed8 /* 8 bit ISR Timer Control Reg */ #define STAT_ISR_TIMER_TEST 0x0ed9 /* 8 bit ISR Timer Test Reg */ /* 0x0eda - 0x0eff: reserved */ #define ST_LAST_IDX_MASK 0x007f /* Last Index Mask */ #define ST_TXRP_IDX_MASK 0x0fff /* Tx Report Index Mask */ #define ST_TXTH_IDX_MASK 0x0fff /* Tx Threshold Index Mask */ #define ST_WM_IDX_MASK 0x3f /* FIFO Watermark Index Mask */ /* * Bank 30 */ /* GMAC and GPHY Control Registers (YUKON only) */ #define GMAC_CTRL 0x0f00 /* 32 bit GMAC Control Reg */ #define GPHY_CTRL 0x0f04 /* 32 bit GPHY Control Reg */ #define GMAC_IRQ_SRC 0x0f08 /* 8 bit GMAC Interrupt Source Reg */ /* 0x0f09 - 0x0f0b: reserved */ #define GMAC_IRQ_MSK 0x0f0c /* 8 bit GMAC Interrupt Mask Reg */ /* 0x0f0d - 0x0f0f: reserved */ #define GMAC_LINK_CTRL 0x0f10 /* 16 bit Link Control Reg */ /* 0x0f14 - 0x0f1f: reserved */ /* Wake-up Frame Pattern Match Control Registers (YUKON only) */ #define WOL_REG_OFFS 0x20 /* HW-Bug: Address is + 0x20 against spec. */ #define WOL_CTRL_STAT 0x0f20 /* 16 bit WOL Control/Status Reg */ #define WOL_MATCH_CTL 0x0f22 /* 8 bit WOL Match Control Reg */ #define WOL_MATCH_RES 0x0f23 /* 8 bit WOL Match Result Reg */ #define WOL_MAC_ADDR_LO 0x0f24 /* 32 bit WOL MAC Address Low */ #define WOL_MAC_ADDR_HI 0x0f28 /* 16 bit WOL MAC Address High */ #define WOL_PATT_PME 0x0f2a /* 8 bit WOL PME Match Enable (Yukon-2) */ #define WOL_PATT_ASFM 0x0f2b /* 8 bit WOL ASF Match Enable (Yukon-2) */ #define WOL_PATT_RPTR 0x0f2c /* 8 bit WOL Pattern Read Pointer */ /* WOL Pattern Length Registers (YUKON only) */ #define WOL_PATT_LEN_LO 0x0f30 /* 32 bit WOL Pattern Length 3..0 */ #define WOL_PATT_LEN_HI 0x0f34 /* 24 bit WOL Pattern Length 6..4 */ /* WOL Pattern Counter Registers (YUKON only) */ #define WOL_PATT_CNT_0 0x0f38 /* 32 bit WOL Pattern Counter 3..0 */ #define WOL_PATT_CNT_4 0x0f3c /* 24 bit WOL Pattern Counter 6..4 */ /* 0x0f40 - 0x0f7f: reserved */ /* * Bank 31 */ /* 0x0f80 - 0x0fff: reserved */ /* WOL registers link 2 */ /* use this macro to access WOL registers */ #define WOL_REG(Port, Reg) ((Reg) + ((Port)*0x80) + (pAC->GIni.GIWolOffs)) /* * Bank 32 - 33 */ #define WOL_PATT_RAM_1 0x1000 /* WOL Pattern RAM Link 1 */ #define WOL_PATT_RAM_2 0x1400 /* WOL Pattern RAM Link 2 */ /* use this macro to retrieve the pattern ram base address */ #define WOL_PATT_RAM_BASE(Port) (WOL_PATT_RAM_1 + (Port)*0x400) /* offset to configuration space on Yukon-2 */ #define Y2_CFG_SPC 0x1c00 /* * Bank 0x22 - 0x3f */ /* 0x1100 - 0x1fff: reserved */ /* * Bank 0x40 - 0x4f */ #define BASE_XMAC_1 0x2000 /* XMAC 1 registers */ /* * Bank 0x50 - 0x5f */ #define BASE_GMAC_1 0x2800 /* GMAC 1 registers */ /* * Bank 0x60 - 0x6f */ #define BASE_XMAC_2 0x3000 /* XMAC 2 registers */ /* * Bank 0x70 - 0x7f */ #define BASE_GMAC_2 0x3800 /* GMAC 2 registers */ /* * Control Register Bit Definitions: */ /* B0_RAP 8 bit Register Address Port */ /* Bit 7: reserved */ #define RAP_MSK 0x7f /* Bit 6..0: 0 = block 0,..,6f = block 6f */ /* B0_CTST 24 bit Control/Status register */ /* Bit 23..18: reserved */ #define Y2_VMAIN_AVAIL BIT_17 /* VMAIN available (YUKON-2 only) */ #define Y2_VAUX_AVAIL BIT_16 /* VAUX available (YUKON-2 only) */ #define Y2_HW_WOL_ON BIT_15S /* HW WOL On (Yukon-EC Ultra A1 only) */ #define Y2_HW_WOL_OFF BIT_14S /* HW WOL Off (Yukon-EC Ultra A1 only) */ #define Y2_ASF_ENABLE BIT_13S /* ASF Unit Enable (YUKON-2 only) */ #define Y2_ASF_DISABLE BIT_12S /* ASF Unit Disable (YUKON-2 only) */ #define Y2_CLK_RUN_ENA BIT_11S /* CLK_RUN Enable (YUKON-2 only) */ #define Y2_CLK_RUN_DIS BIT_10S /* CLK_RUN Disable (YUKON-2 only) */ #define Y2_LED_STAT_ON BIT_9S /* Status LED On (YUKON-2 only) */ #define Y2_LED_STAT_OFF BIT_8S /* Status LED Off (YUKON-2 only) */ /* Bit 7.. 0: same as below */ /* B0_CTST 16 bit Control/Status register */ /* Bit 15..14: reserved */ #define CS_CLK_RUN_HOT BIT_13S /* CLK_RUN Hot m. (YUKON-Lite only) */ #define CS_CLK_RUN_RST BIT_12S /* CLK_RUN Reset (YUKON-Lite only) */ #define CS_CLK_RUN_ENA BIT_11S /* CLK_RUN Enable (YUKON-Lite only) */ #define CS_VAUX_AVAIL BIT_10S /* VAUX available (YUKON only) */ #define CS_BUS_CLOCK BIT_9S /* Bus Clock 0/1 = 33/66 MHz */ #define CS_BUS_SLOT_SZ BIT_8S /* Slot Size 0/1 = 32/64 bit slot */ #define CS_ST_SW_IRQ BIT_7S /* Set IRQ SW Request */ #define CS_CL_SW_IRQ BIT_6S /* Clear IRQ SW Request */ #define CS_STOP_DONE BIT_5S /* Stop Master is finished */ #define CS_STOP_MAST BIT_4S /* Command Bit to stop the master */ #define CS_MRST_CLR BIT_3S /* Clear Master Reset */ #define CS_MRST_SET BIT_2S /* Set Master Reset */ #define CS_RST_CLR BIT_1S /* Clear Software Reset */ #define CS_RST_SET BIT_0S /* Set Software Reset */ /* B0_LED 8 Bit LED register (GENESIS only)*/ /* Bit 7.. 2: reserved */ #define LED_STAT_ON BIT_1S /* Status LED On */ #define LED_STAT_OFF BIT_0S /* Status LED Off */ /* B0_POWER_CTRL 8 Bit Power Control reg (YUKON only) */ #define PC_VAUX_ENA BIT_7 /* Switch VAUX Enable */ #define PC_VAUX_DIS BIT_6 /* Switch VAUX Disable */ #define PC_VCC_ENA BIT_5 /* Switch VCC Enable */ #define PC_VCC_DIS BIT_4 /* Switch VCC Disable */ #define PC_VAUX_ON BIT_3 /* Switch VAUX On */ #define PC_VAUX_OFF BIT_2 /* Switch VAUX Off */ #define PC_VCC_ON BIT_1 /* Switch VCC On */ #define PC_VCC_OFF BIT_0 /* Switch VCC Off */ /* Yukon and Genesis */ /* B0_ISRC 32 bit Interrupt Source Register */ /* B0_IMSK 32 bit Interrupt Mask Register */ /* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ /* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ #define IS_ALL_MSK 0xbfffffffUL /* All Interrupt bits */ #define IS_HW_ERR BIT_31 /* Interrupt HW Error */ /* Bit 30: reserved */ #define IS_PA_TO_RX1 BIT_29 /* Packet Arb Timeout Rx1 */ #define IS_PA_TO_RX2 BIT_28 /* Packet Arb Timeout Rx2 */ #define IS_PA_TO_TX1 BIT_27 /* Packet Arb Timeout Tx1 */ #define IS_PA_TO_TX2 BIT_26 /* Packet Arb Timeout Tx2 */ #define IS_I2C_READY BIT_25 /* IRQ on end of I2C Tx */ #define IS_IRQ_SW BIT_24 /* SW forced IRQ */ #define IS_EXT_REG BIT_23 /* IRQ from LM80 or PHY (GENESIS only) */ /* IRQ from PHY (YUKON only) */ #define IS_TIMINT BIT_22 /* IRQ from Timer */ #define IS_MAC1 BIT_21 /* IRQ from MAC 1 */ #define IS_LNK_SYNC_M1 BIT_20 /* Link Sync Cnt wrap MAC 1 */ #define IS_MAC2 BIT_19 /* IRQ from MAC 2 */ #define IS_LNK_SYNC_M2 BIT_18 /* Link Sync Cnt wrap MAC 2 */ /* Receive Queue 1 */ #define IS_R1_B BIT_17 /* Q_R1 End of Buffer */ #define IS_R1_F BIT_16 /* Q_R1 End of Frame */ #define IS_R1_C BIT_15 /* Q_R1 Encoding Error */ /* Receive Queue 2 */ #define IS_R2_B BIT_14 /* Q_R2 End of Buffer */ #define IS_R2_F BIT_13 /* Q_R2 End of Frame */ #define IS_R2_C BIT_12 /* Q_R2 Encoding Error */ /* Synchronous Transmit Queue 1 */ #define IS_XS1_B BIT_11 /* Q_XS1 End of Buffer */ #define IS_XS1_F BIT_10 /* Q_XS1 End of Frame */ #define IS_XS1_C BIT_9 /* Q_XS1 Encoding Error */ /* Asynchronous Transmit Queue 1 */ #define IS_XA1_B BIT_8 /* Q_XA1 End of Buffer */ #define IS_XA1_F BIT_7 /* Q_XA1 End of Frame */ #define IS_XA1_C BIT_6 /* Q_XA1 Encoding Error */ /* Synchronous Transmit Queue 2 */ #define IS_XS2_B BIT_5 /* Q_XS2 End of Buffer */ #define IS_XS2_F BIT_4 /* Q_XS2 End of Frame */ #define IS_XS2_C BIT_3 /* Q_XS2 Encoding Error */ /* Asynchronous Transmit Queue 2 */ #define IS_XA2_B BIT_2 /* Q_XA2 End of Buffer */ #define IS_XA2_F BIT_1 /* Q_XA2 End of Frame */ #define IS_XA2_C BIT_0 /* Q_XA2 Encoding Error */ /* Yukon-2 */ /* B0_ISRC 32 bit Interrupt Source Register */ /* B0_IMSK 32 bit Interrupt Mask Register */ /* B0_SP_ISRC 32 bit Special Interrupt Source Reg */ /* B2_IRQM_MSK 32 bit IRQ Moderation Mask */ /* B0_Y2_SP_ISRC2 32 bit Special Interrupt Source Reg 2 */ /* B0_Y2_SP_ISRC3 32 bit Special Interrupt Source Reg 3 */ /* B0_Y2_SP_EISR 32 bit Enter ISR Reg */ /* B0_Y2_SP_LISR 32 bit Leave ISR Reg */ #define Y2_IS_PORT_MASK(Port, Mask) ((Mask) << (Port*8)) #define Y2_IS_HW_ERR BIT_31 /* Interrupt HW Error */ #define Y2_IS_STAT_BMU BIT_30 /* Status BMU Interrupt */ #define Y2_IS_ASF BIT_29 /* ASF subsystem Interrupt */ /* Bit 28: reserved */ #define Y2_IS_POLL_CHK BIT_27 /* Check IRQ from polling unit */ #define Y2_IS_TWSI_RDY BIT_26 /* IRQ on end of TWSI Tx */ #define Y2_IS_IRQ_SW BIT_25 /* SW forced IRQ */ #define Y2_IS_TIMINT BIT_24 /* IRQ from Timer */ /* Bit 23..16 reserved */ /* Link 2 Interrupts */ #define Y2_IS_IRQ_PHY2 BIT_12 /* Interrupt from PHY 2 */ #define Y2_IS_IRQ_MAC2 BIT_11 /* Interrupt from MAC 2 */ #define Y2_IS_CHK_RX2 BIT_10 /* Descriptor error Rx 2 */ #define Y2_IS_CHK_TXS2 BIT_9 /* Descriptor error TXS 2 */ #define Y2_IS_CHK_TXA2 BIT_8 /* Descriptor error TXA 2 */ /* Bit 7.. 5 reserved */ /* Link 1 interrupts */ #define Y2_IS_IRQ_PHY1 BIT_4 /* Interrupt from PHY 1 */ #define Y2_IS_IRQ_MAC1 BIT_3 /* Interrupt from MAC 1 */ #define Y2_IS_CHK_RX1 BIT_2 /* Descriptor error Rx 1 */ #define Y2_IS_CHK_TXS1 BIT_1 /* Descriptor error TXS 1 */ #define Y2_IS_CHK_TXA1 BIT_0 /* Descriptor error TXA 1 */ #define Y2_IS_L1_MASK 0x0000001fUL /* IRQ Mask for port 1 */ #define Y2_IS_L2_MASK 0x00001f00UL /* IRQ Mask for port 2 */ #define Y2_IS_ALL_MSK 0xef001f1fUL /* All Interrupt bits */ /* B0_Y2_SP_ICR 32 bit Interrupt Control Register */ /* Bit 31.. 4: reserved */ #define Y2_IC_ISR_MASK BIT_3 /* ISR mask flag */ #define Y2_IC_ISR_STAT BIT_2 /* ISR status flag */ #define Y2_IC_LEAVE_ISR BIT_1 /* Leave ISR */ #define Y2_IC_ENTER_ISR BIT_0 /* Enter ISR */ /* Yukon and Genesis */ /* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ /* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ /* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ #define IS_ERR_MSK 0x00000fffL /* All Error bits */ /* Bit 31..14: reserved */ #define IS_IRQ_TIST_OV BIT_13 /* Time Stamp Timer Overflow (YUKON only) */ #define IS_IRQ_SENSOR BIT_12 /* IRQ from Sensor (YUKON only) */ #define IS_IRQ_MST_ERR BIT_11 /* IRQ master error detected */ #define IS_IRQ_STAT BIT_10 /* IRQ status exception */ #define IS_NO_STAT_M1 BIT_9 /* No Rx Status from MAC 1 */ #define IS_NO_STAT_M2 BIT_8 /* No Rx Status from MAC 2 */ #define IS_NO_TIST_M1 BIT_7 /* No Time Stamp from MAC 1 */ #define IS_NO_TIST_M2 BIT_6 /* No Time Stamp from MAC 2 */ #define IS_RAM_RD_PAR BIT_5 /* RAM Read Parity Error */ #define IS_RAM_WR_PAR BIT_4 /* RAM Write Parity Error */ #define IS_M1_PAR_ERR BIT_3 /* MAC 1 Parity Error */ #define IS_M2_PAR_ERR BIT_2 /* MAC 2 Parity Error */ #define IS_R1_PAR_ERR BIT_1 /* Queue R1 Parity Error */ #define IS_R2_PAR_ERR BIT_0 /* Queue R2 Parity Error */ /* Yukon-2 */ /* B0_HWE_ISRC 32 bit HW Error Interrupt Src Reg */ /* B0_HWE_IMSK 32 bit HW Error Interrupt Mask Reg */ /* B2_IRQM_HWE_MSK 32 bit IRQ Moderation HW Error Mask */ /* Bit: 31..30 reserved */ #define Y2_IS_TIST_OV BIT_29 /* Time Stamp Timer overflow interrupt */ #define Y2_IS_SENSOR BIT_28 /* Sensor interrupt */ #define Y2_IS_MST_ERR BIT_27 /* Master error interrupt */ #define Y2_IS_IRQ_STAT BIT_26 /* Status exception interrupt */ #define Y2_IS_PCI_EXP BIT_25 /* PCI-Express interrupt */ #define Y2_IS_PCI_NEXP BIT_24 /* Bus Abort detected */ /* Bit: 23..14 reserved */ /* Link 2 */ #define Y2_IS_PAR_RD2 BIT_13 /* Read RAM parity error interrupt */ #define Y2_IS_PAR_WR2 BIT_12 /* Write RAM parity error interrupt */ #define Y2_IS_PAR_MAC2 BIT_11 /* MAC hardware fault interrupt */ #define Y2_IS_PAR_RX2 BIT_10 /* Parity Error Rx Queue 2 */ #define Y2_IS_TCP_TXS2 BIT_9 /* TCP length mismatch sync Tx queue IRQ */ #define Y2_IS_TCP_TXA2 BIT_8 /* TCP length mismatch async Tx queue IRQ */ /* Bit: 9.. 6 reserved */ /* Link 1 */ #define Y2_IS_PAR_RD1 BIT_5 /* Read RAM parity error interrupt */ #define Y2_IS_PAR_WR1 BIT_4 /* Write RAM parity error interrupt */ #define Y2_IS_PAR_MAC1 BIT_3 /* MAC hardware fault interrupt */ #define Y2_IS_PAR_RX1 BIT_2 /* Parity Error Rx Queue 1 */ #define Y2_IS_TCP_TXS1 BIT_1 /* TCP length mismatch sync Tx queue IRQ */ #define Y2_IS_TCP_TXA1 BIT_0 /* TCP length mismatch async Tx queue IRQ */ #define Y2_HWE_L1_MASK (Y2_IS_PAR_RD1 | Y2_IS_PAR_WR1 | Y2_IS_PAR_MAC1 |\ Y2_IS_PAR_RX1 | Y2_IS_TCP_TXS1| Y2_IS_TCP_TXA1) #define Y2_HWE_L2_MASK (Y2_IS_PAR_RD2 | Y2_IS_PAR_WR2 | Y2_IS_PAR_MAC2 |\ Y2_IS_PAR_RX2 | Y2_IS_TCP_TXS2| Y2_IS_TCP_TXA2) #define Y2_HWE_ALL_MSK (Y2_IS_TIST_OV | /* Y2_IS_SENSOR | */ Y2_IS_MST_ERR |\ Y2_IS_IRQ_STAT | Y2_IS_PCI_EXP |\ Y2_HWE_L1_MASK | Y2_HWE_L2_MASK) /* B2_CONN_TYP 8 bit Connector type */ /* B2_PMD_TYP 8 bit PMD type */ /* Values of connector and PMD type comply to SysKonnect internal std */ /* B2_MAC_CFG 8 bit MAC Configuration / Chip Revision */ #define CFG_CHIP_R_MSK (0xf<<4) /* Bit 7.. 4: Chip Revision */ /* Bit 3.. 2: reserved */ #define CFG_DIS_M2_CLK BIT_1S /* Disable Clock for 2nd MAC */ #define CFG_SNG_MAC BIT_0S /* MAC Config: 0 = 2 MACs; 1 = 1 MAC */ /* B2_CHIP_ID 8 bit Chip Identification Number */ #define CHIP_ID_GENESIS 0x0a /* Chip ID for GENESIS */ #define CHIP_ID_YUKON 0xb0 /* Chip ID for YUKON */ #define CHIP_ID_YUKON_LITE 0xb1 /* Chip ID for YUKON-Lite (Rev. A1-A3) */ #define CHIP_ID_YUKON_LP 0xb2 /* Chip ID for YUKON-LP */ #define CHIP_ID_YUKON_XL 0xb3 /* Chip ID for YUKON-2 XL */ #define CHIP_ID_YUKON_EC_U 0xb4 /* Chip ID for YUKON-2 EC Ultra */ #define CHIP_ID_YUKON_EC 0xb6 /* Chip ID for YUKON-2 EC */ #define CHIP_ID_YUKON_FE 0xb7 /* Chip ID for YUKON-2 FE */ #define CHIP_REV_YU_LITE_A1 3 /* Chip Rev. for YUKON-Lite A1,A2 */ #define CHIP_REV_YU_LITE_A3 7 /* Chip Rev. for YUKON-Lite A3 */ #define CHIP_REV_YU_XL_A0 0 /* Chip Rev. for Yukon-2 A0 */ #define CHIP_REV_YU_XL_A1 1 /* Chip Rev. for Yukon-2 A1 */ #define CHIP_REV_YU_XL_A2 2 /* Chip Rev. for Yukon-2 A2 */ #define CHIP_REV_YU_XL_A3 3 /* Chip Rev. for Yukon-2 A3 */ #define CHIP_REV_YU_EC_A1 0 /* Chip Rev. for Yukon-EC A0,A1 */ #define CHIP_REV_YU_EC_A2 1 /* Chip Rev. for Yukon-EC A2 */ #define CHIP_REV_YU_EC_A3 2 /* Chip Rev. for Yukon-EC A3 */ #define CHIP_REV_YU_EC_U_A0 1 /* Chip Rev. for Yukon-EC Ultra A0 */ #define CHIP_REV_YU_EC_U_A1 2 /* Chip Rev. for Yukon-EC Ultra A1 */ /* B2_Y2_CLK_GATE 8 bit Clock Gating (Yukon-2 only) */ #define Y2_STATUS_LNK2_INAC BIT_7S /* Status Link 2 inactiv (0 = activ) */ #define Y2_CLK_GAT_LNK2_DIS BIT_6S /* Disable PHY clock for Link 2 */ #define Y2_COR_CLK_LNK2_DIS BIT_5S /* Disable Core clock Link 2 */ #define Y2_PCI_CLK_LNK2_DIS BIT_4S /* Disable PCI clock Link 2 */ #define Y2_STATUS_LNK1_INAC BIT_3S /* Status Link 1 inactiv (0 = activ) */ #define Y2_CLK_GAT_LNK1_DIS BIT_2S /* Disable PHY clock for Link 1 */ #define Y2_COR_CLK_LNK1_DIS BIT_1S /* Disable Core clock Link 1 */ #define Y2_PCI_CLK_LNK1_DIS BIT_0S /* Disable PCI clock Link 1 */ /* B2_Y2_HW_RES 8 bit HW Resources (Yukon-2 only) */ /* Bit 7.. 6: reserved */ #define CFG_PEX_PME_NATIVE BIT_5S /* PCI-E PME native mode select */ #define CFG_LED_MODE_MSK (7<<2) /* Bit 4.. 2: LED Mode Mask */ #define CFG_LINK_2_AVAIL BIT_1S /* Link 2 available */ #define CFG_LINK_1_AVAIL BIT_0S /* Link 1 available */ #define CFG_LED_MODE(x) (((x) & CFG_LED_MODE_MSK) >> 2) #define CFG_DUAL_MAC_MSK (CFG_LINK_2_AVAIL | CFG_LINK_1_AVAIL) #define CFG_LED_DUAL_ACT_LNK 1 /* Dual LED ACT/LNK mode */ #define CFG_LED_LINK_MUX_P60 2 /* Link LED on pin 60 (Yukon-EC Ultra) */ /* B2_E_3 8 bit lower 4 bits used for HW self test result */ #define B2_E3_RES_MASK 0x0f /* B2_FAR 32 bit Flash-Prom Addr Reg/Cnt */ #define FAR_ADDR 0x1ffffL /* Bit 16.. 0: FPROM Address Mask */ /* B2_Y2_CLK_CTRL 32 bit Core Clock Frequency Control Register (Yukon-2/EC) */ /* Bit 31..24: reserved */ /* Yukon-EC/FE */ #define Y2_CLK_DIV_VAL_MSK (0xffL<<16) /* Bit 23..16: Clock Divisor Value */ #define Y2_CLK_DIV_VAL(x) (SHIFT16(x) & Y2_CLK_DIV_VAL_MSK) /* Yukon-2 */ #define Y2_CLK_DIV_VAL2_MSK (7L<<21) /* Bit 23..21: Clock Divisor Value */ #define Y2_CLK_SELECT2_MSK (0x1fL<<16) /* Bit 20..16: Clock Select */ #define Y2_CLK_DIV_VAL_2(x) (SHIFT21(x) & Y2_CLK_DIV_VAL2_MSK) #define Y2_CLK_SEL_VAL_2(x) (SHIFT16(x) & Y2_CLK_SELECT2_MSK) /* Bit 15.. 2: reserved */ #define Y2_CLK_DIV_ENA BIT_1S /* Enable Core Clock Division */ #define Y2_CLK_DIV_DIS BIT_0S /* Disable Core Clock Division */ /* B2_LD_CTRL 8 bit EPROM loader control register */ /* Bits are currently reserved */ /* B2_LD_TEST 8 bit EPROM loader test register */ /* Bit 7.. 4: reserved */ #define LD_T_ON BIT_3S /* Loader Test mode on */ #define LD_T_OFF BIT_2S /* Loader Test mode off */ #define LD_T_STEP BIT_1S /* Decrement FPROM addr. Counter */ #define LD_START BIT_0S /* Start loading FPROM */ /* * Timer Section */ /* B2_TI_CTRL 8 bit Timer control */ /* B2_IRQM_CTRL 8 bit IRQ Moderation Timer Control */ /* Bit 7.. 3: reserved */ #define TIM_START BIT_2S /* Start Timer */ #define TIM_STOP BIT_1S /* Stop Timer */ #define TIM_CLR_IRQ BIT_0S /* Clear Timer IRQ (!IRQM) */ /* B2_TI_TEST 8 Bit Timer Test */ /* B2_IRQM_TEST 8 bit IRQ Moderation Timer Test */ /* B28_DPT_TST 8 bit Descriptor Poll Timer Test Reg */ /* Bit 7.. 3: reserved */ #define TIM_T_ON BIT_2S /* Test mode on */ #define TIM_T_OFF BIT_1S /* Test mode off */ #define TIM_T_STEP BIT_0S /* Test step */ /* B28_DPT_INI 32 bit Descriptor Poll Timer Init Val */ /* B28_DPT_VAL 32 bit Descriptor Poll Timer Curr Val */ /* Bit 31..24: reserved */ #define DPT_MSK 0x00ffffffL /* Bit 23.. 0: Desc Poll Timer Bits */ /* B28_DPT_CTRL 8 bit Descriptor Poll Timer Ctrl Reg */ /* Bit 7.. 2: reserved */ #define DPT_START BIT_1S /* Start Descriptor Poll Timer */ #define DPT_STOP BIT_0S /* Stop Descriptor Poll Timer */ /* B2_TST_CTRL1 8 bit Test Control Register 1 */ #define TST_FRC_DPERR_MR BIT_7S /* force DATAPERR on MST RD */ #define TST_FRC_DPERR_MW BIT_6S /* force DATAPERR on MST WR */ #define TST_FRC_DPERR_TR BIT_5S /* force DATAPERR on TRG RD */ #define TST_FRC_DPERR_TW BIT_4S /* force DATAPERR on TRG WR */ #define TST_FRC_APERR_M BIT_3S /* force ADDRPERR on MST */ #define TST_FRC_APERR_T BIT_2S /* force ADDRPERR on TRG */ #define TST_CFG_WRITE_ON BIT_1S /* Enable Config Reg WR */ #define TST_CFG_WRITE_OFF BIT_0S /* Disable Config Reg WR */ /* B2_TST_CTRL2 8 bit Test Control Register 2 */ /* Bit 7.. 4: reserved */ /* force the following error on the next master read/write */ #define TST_FRC_DPERR_MR64 BIT_3S /* DataPERR RD 64 */ #define TST_FRC_DPERR_MW64 BIT_2S /* DataPERR WR 64 */ #define TST_FRC_APERR_1M64 BIT_1S /* AddrPERR on 1. phase */ #define TST_FRC_APERR_2M64 BIT_0S /* AddrPERR on 2. phase */ /* B2_GP_IO 32 bit General Purpose I/O Register */ /* Bit 31..26: reserved */ #define GP_DIR_9 BIT_25 /* IO_9 direct, 0=In/1=Out */ #define GP_DIR_8 BIT_24 /* IO_8 direct, 0=In/1=Out */ #define GP_DIR_7 BIT_23 /* IO_7 direct, 0=In/1=Out */ #define GP_DIR_6 BIT_22 /* IO_6 direct, 0=In/1=Out */ #define GP_DIR_5 BIT_21 /* IO_5 direct, 0=In/1=Out */ #define GP_DIR_4 BIT_20 /* IO_4 direct, 0=In/1=Out */ #define GP_DIR_3 BIT_19 /* IO_3 direct, 0=In/1=Out */ #define GP_DIR_2 BIT_18 /* IO_2 direct, 0=In/1=Out */ #define GP_DIR_1 BIT_17 /* IO_1 direct, 0=In/1=Out */ #define GP_DIR_0 BIT_16 /* IO_0 direct, 0=In/1=Out */ /* Bit 15..10: reserved */ #define GP_IO_9 BIT_9 /* IO_9 pin */ #define GP_IO_8 BIT_8 /* IO_8 pin */ #define GP_IO_7 BIT_7 /* IO_7 pin */ #define GP_IO_6 BIT_6 /* IO_6 pin */ #define GP_IO_5 BIT_5 /* IO_5 pin */ #define GP_IO_4 BIT_4 /* IO_4 pin */ #define GP_IO_3 BIT_3 /* IO_3 pin */ #define GP_IO_2 BIT_2 /* IO_2 pin */ #define GP_IO_1 BIT_1 /* IO_1 pin */ #define GP_IO_0 BIT_0 /* IO_0 pin */ /* B2_I2C_CTRL 32 bit I2C HW Control Register */ #define I2C_FLAG BIT_31 /* Start read/write if WR */ #define I2C_ADDR (0x7fffL<<16) /* Bit 30..16: Addr to be RD/WR */ #define I2C_DEV_SEL (0x7fL<<9) /* Bit 15.. 9: I2C Device Select */ /* Bit 8.. 5: reserved */ #define I2C_BURST_LEN BIT_4 /* Burst Len, 1/4 bytes */ #define I2C_DEV_SIZE (7<<1) /* Bit 3.. 1: I2C Device Size */ #define I2C_025K_DEV (0<<1) /* 0: 256 Bytes or smaller */ #define I2C_05K_DEV (1<<1) /* 1: 512 Bytes */ #define I2C_1K_DEV (2<<1) /* 2: 1024 Bytes */ #define I2C_2K_DEV (3<<1) /* 3: 2048 Bytes */ #define I2C_4K_DEV (4<<1) /* 4: 4096 Bytes */ #define I2C_8K_DEV (5<<1) /* 5: 8192 Bytes */ #define I2C_16K_DEV (6<<1) /* 6: 16384 Bytes */ #define I2C_32K_DEV (7<<1) /* 7: 32768 Bytes */ #define I2C_STOP BIT_0 /* Interrupt I2C transfer */ /* B2_I2C_IRQ 32 bit I2C HW IRQ Register */ /* Bit 31.. 1 reserved */ #define I2C_CLR_IRQ BIT_0 /* Clear I2C IRQ */ /* B2_I2C_SW 32 bit (8 bit access) I2C SW Port Register */ /* Bit 7.. 3: reserved */ #define I2C_DATA_DIR BIT_2S /* direction of I2C_DATA */ #define I2C_DATA BIT_1S /* I2C Data Port */ #define I2C_CLK BIT_0S /* I2C Clock Port */ /* I2C Address */ #define I2C_SENS_ADDR LM80_ADDR /* I2C Sensor Address (Volt and Temp) */ /* B2_BSC_CTRL 8 bit Blink Source Counter Control */ /* Bit 7.. 2: reserved */ #define BSC_START BIT_1S /* Start Blink Source Counter */ #define BSC_STOP BIT_0S /* Stop Blink Source Counter */ /* B2_BSC_STAT 8 bit Blink Source Counter Status */ /* Bit 7.. 1: reserved */ #define BSC_SRC BIT_0S /* Blink Source, 0=Off / 1=On */ /* B2_BSC_TST 16 bit Blink Source Counter Test Reg */ #define BSC_T_ON BIT_2S /* Test mode on */ #define BSC_T_OFF BIT_1S /* Test mode off */ #define BSC_T_STEP BIT_0S /* Test step */ /* Y2_PEX_PHY_ADDR/DATA PEX PHY address and data reg (Yukon-2 only) */ #define PEX_RD_ACCESS BIT_31 /* Access Mode Read = 1, Write = 0 */ #define PEX_DB_ACCESS BIT_30 /* Access to debug register */ /* B3_RAM_ADDR 32 bit RAM Address, to read or write */ /* Bit 31..19: reserved */ #define RAM_ADR_RAN 0x0007ffffL /* Bit 18.. 0: RAM Address Range */ /* RAM Interface Registers */ /* B3_RI_CTRL 16 bit RAM Interface Control Register */ /* Bit 15..10: reserved */ #define RI_CLR_RD_PERR BIT_9S /* Clear IRQ RAM Read Parity Err */ #define RI_CLR_WR_PERR BIT_8S /* Clear IRQ RAM Write Parity Err */ /* Bit 7.. 2: reserved */ #define RI_RST_CLR BIT_1S /* Clear RAM Interface Reset */ #define RI_RST_SET BIT_0S /* Set RAM Interface Reset */ /* B3_RI_TEST 8 bit RAM Iface Test Register */ /* Bit 15.. 4: reserved */ #define RI_T_EV BIT_3S /* Timeout Event occured */ #define RI_T_ON BIT_2S /* Timeout Timer Test On */ #define RI_T_OFF BIT_1S /* Timeout Timer Test Off */ #define RI_T_STEP BIT_0S /* Timeout Timer Step */ /* MAC Arbiter Registers */ /* B3_MA_TO_CTRL 16 bit MAC Arbiter Timeout Ctrl Reg */ /* Bit 15.. 4: reserved */ #define MA_FOE_ON BIT_3S /* XMAC Fast Output Enable ON */ #define MA_FOE_OFF BIT_2S /* XMAC Fast Output Enable OFF */ #define MA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ #define MA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ /* B3_MA_RC_CTRL 16 bit MAC Arbiter Recovery Ctrl Reg */ /* Bit 15.. 8: reserved */ #define MA_ENA_REC_TX2 BIT_7S /* Enable Recovery Timer TX2 */ #define MA_DIS_REC_TX2 BIT_6S /* Disable Recovery Timer TX2 */ #define MA_ENA_REC_TX1 BIT_5S /* Enable Recovery Timer TX1 */ #define MA_DIS_REC_TX1 BIT_4S /* Disable Recovery Timer TX1 */ #define MA_ENA_REC_RX2 BIT_3S /* Enable Recovery Timer RX2 */ #define MA_DIS_REC_RX2 BIT_2S /* Disable Recovery Timer RX2 */ #define MA_ENA_REC_RX1 BIT_1S /* Enable Recovery Timer RX1 */ #define MA_DIS_REC_RX1 BIT_0S /* Disable Recovery Timer RX1 */ /* Packet Arbiter Registers */ /* B3_PA_CTRL 16 bit Packet Arbiter Ctrl Register */ /* Bit 15..14: reserved */ #define PA_CLR_TO_TX2 BIT_13S /* Clear IRQ Packet Timeout TX2 */ #define PA_CLR_TO_TX1 BIT_12S /* Clear IRQ Packet Timeout TX1 */ #define PA_CLR_TO_RX2 BIT_11S /* Clear IRQ Packet Timeout RX2 */ #define PA_CLR_TO_RX1 BIT_10S /* Clear IRQ Packet Timeout RX1 */ #define PA_ENA_TO_TX2 BIT_9S /* Enable Timeout Timer TX2 */ #define PA_DIS_TO_TX2 BIT_8S /* Disable Timeout Timer TX2 */ #define PA_ENA_TO_TX1 BIT_7S /* Enable Timeout Timer TX1 */ #define PA_DIS_TO_TX1 BIT_6S /* Disable Timeout Timer TX1 */ #define PA_ENA_TO_RX2 BIT_5S /* Enable Timeout Timer RX2 */ #define PA_DIS_TO_RX2 BIT_4S /* Disable Timeout Timer RX2 */ #define PA_ENA_TO_RX1 BIT_3S /* Enable Timeout Timer RX1 */ #define PA_DIS_TO_RX1 BIT_2S /* Disable Timeout Timer RX1 */ #define PA_RST_CLR BIT_1S /* Clear MAC Arbiter Reset */ #define PA_RST_SET BIT_0S /* Set MAC Arbiter Reset */ #define PA_ENA_TO_ALL (PA_ENA_TO_RX1 | PA_ENA_TO_RX2 |\ PA_ENA_TO_TX1 | PA_ENA_TO_TX2) /* Rx/Tx Path related Arbiter Test Registers */ /* B3_MA_TO_TEST 16 bit MAC Arbiter Timeout Test Reg */ /* B3_MA_RC_TEST 16 bit MAC Arbiter Recovery Test Reg */ /* B3_PA_TEST 16 bit Packet Arbiter Test Register */ /* Bit 15, 11, 7, and 3 are reserved in B3_PA_TEST */ #define TX2_T_EV BIT_15S /* TX2 Timeout/Recv Event occured */ #define TX2_T_ON BIT_14S /* TX2 Timeout/Recv Timer Test On */ #define TX2_T_OFF BIT_13S /* TX2 Timeout/Recv Timer Tst Off */ #define TX2_T_STEP BIT_12S /* TX2 Timeout/Recv Timer Step */ #define TX1_T_EV BIT_11S /* TX1 Timeout/Recv Event occured */ #define TX1_T_ON BIT_10S /* TX1 Timeout/Recv Timer Test On */ #define TX1_T_OFF BIT_9S /* TX1 Timeout/Recv Timer Tst Off */ #define TX1_T_STEP BIT_8S /* TX1 Timeout/Recv Timer Step */ #define RX2_T_EV BIT_7S /* RX2 Timeout/Recv Event occured */ #define RX2_T_ON BIT_6S /* RX2 Timeout/Recv Timer Test On */ #define RX2_T_OFF BIT_5S /* RX2 Timeout/Recv Timer Tst Off */ #define RX2_T_STEP BIT_4S /* RX2 Timeout/Recv Timer Step */ #define RX1_T_EV BIT_3S /* RX1 Timeout/Recv Event occured */ #define RX1_T_ON BIT_2S /* RX1 Timeout/Recv Timer Test On */ #define RX1_T_OFF BIT_1S /* RX1 Timeout/Recv Timer Tst Off */ #define RX1_T_STEP BIT_0S /* RX1 Timeout/Recv Timer Step */ /* Transmit Arbiter Registers MAC 1 and 2, use MR_ADDR() to access */ /* TXA_ITI_INI 32 bit Tx Arb Interval Timer Init Val */ /* TXA_ITI_VAL 32 bit Tx Arb Interval Timer Value */ /* TXA_LIM_INI 32 bit Tx Arb Limit Counter Init Val */ /* TXA_LIM_VAL 32 bit Tx Arb Limit Counter Value */ /* Bit 31..24: reserved */ #define TXA_MAX_VAL 0x00ffffffUL/* Bit 23.. 0: Max TXA Timer/Cnt Val */ /* TXA_CTRL 8 bit Tx Arbiter Control Register */ #define TXA_ENA_FSYNC BIT_7S /* Enable force of sync Tx queue */ #define TXA_DIS_FSYNC BIT_6S /* Disable force of sync Tx queue */ #define TXA_ENA_ALLOC BIT_5S /* Enable alloc of free bandwidth */ #define TXA_DIS_ALLOC BIT_4S /* Disable alloc of free bandwidth */ #define TXA_START_RC BIT_3S /* Start sync Rate Control */ #define TXA_STOP_RC BIT_2S /* Stop sync Rate Control */ #define TXA_ENA_ARB BIT_1S /* Enable Tx Arbiter */ #define TXA_DIS_ARB BIT_0S /* Disable Tx Arbiter */ /* TXA_TEST 8 bit Tx Arbiter Test Register */ /* Bit 7.. 6: reserved */ #define TXA_INT_T_ON BIT_5S /* Tx Arb Interval Timer Test On */ #define TXA_INT_T_OFF BIT_4S /* Tx Arb Interval Timer Test Off */ #define TXA_INT_T_STEP BIT_3S /* Tx Arb Interval Timer Step */ #define TXA_LIM_T_ON BIT_2S /* Tx Arb Limit Timer Test On */ #define TXA_LIM_T_OFF BIT_1S /* Tx Arb Limit Timer Test Off */ #define TXA_LIM_T_STEP BIT_0S /* Tx Arb Limit Timer Step */ /* TXA_STAT 8 bit Tx Arbiter Status Register */ /* Bit 7.. 1: reserved */ #define TXA_PRIO_XS BIT_0S /* sync queue has prio to send */ /* Q_BC 32 bit Current Byte Counter */ /* Bit 31..16: reserved */ #define BC_MAX 0xffff /* Bit 15.. 0: Byte counter */ /* BMU Control / Status Registers (Yukon and Genesis) */ /* B0_R1_CSR 32 bit BMU Ctrl/Stat Rx Queue 1 */ /* B0_R2_CSR 32 bit BMU Ctrl/Stat Rx Queue 2 */ /* B0_XA1_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 1 */ /* B0_XS1_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 1 */ /* B0_XA2_CSR 32 bit BMU Ctrl/Stat Sync Tx Queue 2 */ /* B0_XS2_CSR 32 bit BMU Ctrl/Stat Async Tx Queue 2 */ /* Q_CSR 32 bit BMU Control/Status Register */ /* Bit 31..25: reserved */ #define CSR_SV_IDLE BIT_24 /* BMU SM Idle */ /* Bit 23..22: reserved */ #define CSR_DESC_CLR BIT_21 /* Clear Reset for Descr */ #define CSR_DESC_SET BIT_20 /* Set Reset for Descr */ #define CSR_FIFO_CLR BIT_19 /* Clear Reset for FIFO */ #define CSR_FIFO_SET BIT_18 /* Set Reset for FIFO */ #define CSR_HPI_RUN BIT_17 /* Release HPI SM */ #define CSR_HPI_RST BIT_16 /* Reset HPI SM to Idle */ #define CSR_SV_RUN BIT_15 /* Release Supervisor SM */ #define CSR_SV_RST BIT_14 /* Reset Supervisor SM */ #define CSR_DREAD_RUN BIT_13 /* Release Descr Read SM */ #define CSR_DREAD_RST BIT_12 /* Reset Descr Read SM */ #define CSR_DWRITE_RUN BIT_11 /* Release Descr Write SM */ #define CSR_DWRITE_RST BIT_10 /* Reset Descr Write SM */ #define CSR_TRANS_RUN BIT_9 /* Release Transfer SM */ #define CSR_TRANS_RST BIT_8 /* Reset Transfer SM */ #define CSR_ENA_POL BIT_7 /* Enable Descr Polling */ #define CSR_DIS_POL BIT_6 /* Disable Descr Polling */ #define CSR_STOP BIT_5 /* Stop Rx/Tx Queue */ #define CSR_START BIT_4 /* Start Rx/Tx Queue */ #define CSR_IRQ_CL_P BIT_3 /* (Rx) Clear Parity IRQ */ #define CSR_IRQ_CL_B BIT_2 /* Clear EOB IRQ */ #define CSR_IRQ_CL_F BIT_1 /* Clear EOF IRQ */ #define CSR_IRQ_CL_C BIT_0 /* Clear ERR IRQ */ #define CSR_SET_RESET (CSR_DESC_SET | CSR_FIFO_SET | CSR_HPI_RST |\ CSR_SV_RST | CSR_DREAD_RST | CSR_DWRITE_RST |\ CSR_TRANS_RST) #define CSR_CLR_RESET (CSR_DESC_CLR | CSR_FIFO_CLR | CSR_HPI_RUN |\ CSR_SV_RUN | CSR_DREAD_RUN | CSR_DWRITE_RUN |\ CSR_TRANS_RUN) /* Rx BMU Control / Status Registers (Yukon-2) */ #define BMU_IDLE BIT_31 /* BMU Idle State */ #define BMU_RX_TCP_PKT BIT_30 /* Rx TCP Packet (when RSS Hash enabled) */ #define BMU_RX_IP_PKT BIT_29 /* Rx IP Packet (when RSS Hash enabled) */ /* Bit 28..16: reserved */ #define BMU_ENA_RX_RSS_HASH BIT_15 /* Enable Rx RSS Hash */ #define BMU_DIS_RX_RSS_HASH BIT_14 /* Disable Rx RSS Hash */ #define BMU_ENA_RX_CHKSUM BIT_13 /* Enable Rx TCP/IP Checksum Check */ #define BMU_DIS_RX_CHKSUM BIT_12 /* Disable Rx TCP/IP Checksum Check */ #define BMU_CLR_IRQ_PAR BIT_11 /* Clear IRQ on Parity errors (Rx) */ #define BMU_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segmen. error (Tx) */ #define BMU_CLR_IRQ_CHK BIT_10 /* Clear IRQ Check */ #define BMU_STOP BIT_9 /* Stop Rx/Tx Queue */ #define BMU_START BIT_8 /* Start Rx/Tx Queue */ #define BMU_FIFO_OP_ON BIT_7 /* FIFO Operational On */ #define BMU_FIFO_OP_OFF BIT_6 /* FIFO Operational Off */ #define BMU_FIFO_ENA BIT_5 /* Enable FIFO */ #define BMU_FIFO_RST BIT_4 /* Reset FIFO */ #define BMU_OP_ON BIT_3 /* BMU Operational On */ #define BMU_OP_OFF BIT_2 /* BMU Operational Off */ #define BMU_RST_CLR BIT_1 /* Clear BMU Reset (Enable) */ #define BMU_RST_SET BIT_0 /* Set BMU Reset */ #define BMU_CLR_RESET (BMU_FIFO_RST | BMU_OP_OFF | BMU_RST_CLR) #define BMU_OPER_INIT (BMU_CLR_IRQ_PAR | BMU_CLR_IRQ_CHK | BMU_START | \ BMU_FIFO_ENA | BMU_OP_ON) /* Tx BMU Control / Status Registers (Yukon-2) */ /* Bit 31: same as for Rx */ /* Bit 30..14: reserved */ #define BMU_TX_IPIDINCR_ON BIT_13 /* Enable IP ID Increment */ #define BMU_TX_IPIDINCR_OFF BIT_12 /* Disable IP ID Increment */ #define BMU_TX_CLR_IRQ_TCP BIT_11 /* Clear IRQ on TCP segm. length mism. */ /* Bit 10..0: same as for Rx */ /* Q_F 32 bit Flag Register */ /* Bit 31..28: reserved */ #define F_ALM_FULL BIT_27 /* Rx FIFO: almost full */ #define F_EMPTY BIT_27 /* Tx FIFO: empty flag */ #define F_FIFO_EOF BIT_26 /* Tag (EOF Flag) bit in FIFO */ #define F_WM_REACHED BIT_25 /* Watermark reached */ #define F_M_RX_RAM_DIS BIT_24 /* MAC Rx RAM Read Port disable */ #define F_FIFO_LEVEL (0x1fL<<16) /* Bit 23..16: # of Qwords in FIFO */ /* Bit 15..11: reserved */ #define F_WATER_MARK 0x0007ffL /* Bit 10.. 0: Watermark */ /* Q_T1 32 bit Test Register 1 */ /* Holds four State Machine control Bytes */ #define SM_CTRL_SV_MSK (0xffL<<24) /* Bit 31..24: Control Supervisor SM */ #define SM_CTRL_RD_MSK (0xffL<<16) /* Bit 23..16: Control Read Desc SM */ #define SM_CTRL_WR_MSK (0xffL<<8) /* Bit 15.. 8: Control Write Desc SM */ #define SM_CTRL_TR_MSK 0xffL /* Bit 7.. 0: Control Transfer SM */ /* Q_T1_TR 8 bit Test Register 1 Transfer SM */ /* Q_T1_WR 8 bit Test Register 1 Write Descriptor SM */ /* Q_T1_RD 8 bit Test Register 1 Read Descriptor SM */ /* Q_T1_SV 8 bit Test Register 1 Supervisor SM */ /* The control status byte of each machine looks like ... */ #define SM_STATE 0xf0 /* Bit 7.. 4: State which shall be loaded */ #define SM_LOAD BIT_3S /* Load the SM with SM_STATE */ #define SM_TEST_ON BIT_2S /* Switch on SM Test Mode */ #define SM_TEST_OFF BIT_1S /* Go off the Test Mode */ #define SM_STEP BIT_0S /* Step the State Machine */ /* The encoding of the states is not supported by the Diagnostics Tool */ /* Q_T2 32 bit Test Register 2 */ /* Bit 31.. 8: reserved */ #define T2_AC_T_ON BIT_7 /* Address Counter Test Mode on */ #define T2_AC_T_OFF BIT_6 /* Address Counter Test Mode off */ #define T2_BC_T_ON BIT_5 /* Byte Counter Test Mode on */ #define T2_BC_T_OFF BIT_4 /* Byte Counter Test Mode off */ #define T2_STEP04 BIT_3 /* Inc AC/Dec BC by 4 */ #define T2_STEP03 BIT_2 /* Inc AC/Dec BC by 3 */ #define T2_STEP02 BIT_1 /* Inc AC/Dec BC by 2 */ #define T2_STEP01 BIT_0 /* Inc AC/Dec BC by 1 */ /* Q_T3 32 bit Test Register 3 */ /* Bit 31.. 7: reserved */ #define T3_MUX_MSK (7<<4) /* Bit 6.. 4: Mux Position */ /* Bit 3: reserved */ #define T3_VRAM_MSK 7 /* Bit 2.. 0: Virtual RAM Buffer Address */ /* Queue Prefetch Unit Offsets, use Y2_PREF_Q_ADDR() to address (Yukon-2 only)*/ /* PREF_UNIT_CTRL_REG 32 bit Prefetch Control register */ #define PREF_UNIT_OP_ON BIT_3 /* prefetch unit operational */ #define PREF_UNIT_OP_OFF BIT_2 /* prefetch unit not operational */ #define PREF_UNIT_RST_CLR BIT_1 /* Clear Prefetch Unit Reset */ #define PREF_UNIT_RST_SET BIT_0 /* Set Prefetch Unit Reset */ /* RAM Buffer Register Offsets, use RB_ADDR(Queue, Offs) to access */ /* RB_START 32 bit RAM Buffer Start Address */ /* RB_END 32 bit RAM Buffer End Address */ /* RB_WP 32 bit RAM Buffer Write Pointer */ /* RB_RP 32 bit RAM Buffer Read Pointer */ /* RB_RX_UTPP 32 bit Rx Upper Threshold, Pause Pack */ /* RB_RX_LTPP 32 bit Rx Lower Threshold, Pause Pack */ /* RB_RX_UTHP 32 bit Rx Upper Threshold, High Prio */ /* RB_RX_LTHP 32 bit Rx Lower Threshold, High Prio */ /* RB_PC 32 bit RAM Buffer Packet Counter */ /* RB_LEV 32 bit RAM Buffer Level Register */ /* Bit 31..19: reserved */ #define RB_MSK 0x0007ffff /* Bit 18.. 0: RAM Buffer Pointer Bits */ /* RB_TST2 8 bit RAM Buffer Test Register 2 */ /* Bit 7.. 4: reserved */ #define RB_PC_DEC BIT_3S /* Packet Counter Decrement */ #define RB_PC_T_ON BIT_2S /* Packet Counter Test On */ #define RB_PC_T_OFF BIT_1S /* Packet Counter Test Off */ #define RB_PC_INC BIT_0S /* Packet Counter Increment */ /* RB_TST1 8 bit RAM Buffer Test Register 1 */ /* Bit 7: reserved */ #define RB_WP_T_ON BIT_6S /* Write Pointer Test On */ #define RB_WP_T_OFF BIT_5S /* Write Pointer Test Off */ #define RB_WP_INC BIT_4S /* Write Pointer Increment */ /* Bit 3: reserved */ #define RB_RP_T_ON BIT_2S /* Read Pointer Test On */ #define RB_RP_T_OFF BIT_1S /* Read Pointer Test Off */ #define RB_RP_INC BIT_0S /* Read Pointer Increment */ /* RB_CTRL 8 bit RAM Buffer Control Register */ /* Bit 7.. 6: reserved */ #define RB_ENA_STFWD BIT_5S /* Enable Store & Forward */ #define RB_DIS_STFWD BIT_4S /* Disable Store & Forward */ #define RB_ENA_OP_MD BIT_3S /* Enable Operation Mode */ #define RB_DIS_OP_MD BIT_2S /* Disable Operation Mode */ #define RB_RST_CLR BIT_1S /* Clear RAM Buf STM Reset */ #define RB_RST_SET BIT_0S /* Set RAM Buf STM Reset */ /* Yukon-2 */ /* Bit 31..20: reserved */ #define RB_CNT_DOWN BIT_19 /* Packet Counter Decrement */ #define RB_CNT_TST_ON BIT_18 /* Packet Counter Test On */ #define RB_CNT_TST_OFF BIT_17 /* Packet Counter Test Off */ #define RB_CNT_UP BIT_16 /* Packet Counter Increment */ /* Bit 15: reserved */ #define RB_WP_TST_ON BIT_14 /* Write Pointer Test On */ #define RB_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ #define RB_WP_UP BIT_12 /* Write Pointer Increment */ /* Bit 11: reserved */ #define RB_RP_TST_ON BIT_10 /* Read Pointer Test On */ #define RB_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ #define RB_RP_UP BIT_8 /* Read Pointer Increment */ /* Receive and Transmit MAC FIFO Registers (GENESIS only) */ /* RX_MFF_EA 32 bit Receive MAC FIFO End Address */ /* RX_MFF_WP 32 bit Receive MAC FIFO Write Pointer */ /* RX_MFF_RP 32 bit Receive MAC FIFO Read Pointer */ /* RX_MFF_PC 32 bit Receive MAC FIFO Packet Counter */ /* RX_MFF_LEV 32 bit Receive MAC FIFO Level */ /* TX_MFF_EA 32 bit Transmit MAC FIFO End Address */ /* TX_MFF_WP 32 bit Transmit MAC FIFO Write Pointer */ /* TX_MFF_WSP 32 bit Transmit MAC FIFO WR Shadow Pointer */ /* TX_MFF_RP 32 bit Transmit MAC FIFO Read Pointer */ /* TX_MFF_PC 32 bit Transmit MAC FIFO Packet Cnt */ /* TX_MFF_LEV 32 bit Transmit MAC FIFO Level */ /* Bit 31.. 6: reserved */ #define MFF_MSK 0x007fL /* Bit 5.. 0: MAC FIFO Address/Ptr Bits */ /* RX_MFF_CTRL1 16 bit Receive MAC FIFO Control Reg 1 */ /* Bit 15..14: reserved */ #define MFF_ENA_RDY_PAT BIT_13S /* Enable Ready Patch */ #define MFF_DIS_RDY_PAT BIT_12S /* Disable Ready Patch */ #define MFF_ENA_TIM_PAT BIT_11S /* Enable Timing Patch */ #define MFF_DIS_TIM_PAT BIT_10S /* Disable Timing Patch */ #define MFF_ENA_ALM_FUL BIT_9S /* Enable AlmostFull Sign */ #define MFF_DIS_ALM_FUL BIT_8S /* Disable AlmostFull Sign */ #define MFF_ENA_PAUSE BIT_7S /* Enable Pause Signaling */ #define MFF_DIS_PAUSE BIT_6S /* Disable Pause Signaling */ #define MFF_ENA_FLUSH BIT_5S /* Enable Frame Flushing */ #define MFF_DIS_FLUSH BIT_4S /* Disable Frame Flushing */ #define MFF_ENA_TIST BIT_3S /* Enable Time Stamp Gener */ #define MFF_DIS_TIST BIT_2S /* Disable Time Stamp Gener */ #define MFF_CLR_INTIST BIT_1S /* Clear IRQ No Time Stamp */ #define MFF_CLR_INSTAT BIT_0S /* Clear IRQ No Status */ #define MFF_RX_CTRL_DEF MFF_ENA_TIM_PAT /* TX_MFF_CTRL1 16 bit Transmit MAC FIFO Control Reg 1 */ #define MFF_CLR_PERR BIT_15S /* Clear Parity Error IRQ */ /* Bit 14: reserved */ #define MFF_ENA_PKT_REC BIT_13S /* Enable Packet Recovery */ #define MFF_DIS_PKT_REC BIT_12S /* Disable Packet Recovery */ /* MFF_ENA_TIM_PAT (see RX_MFF_CTRL1) Bit 11: Enable Timing Patch */ /* MFF_DIS_TIM_PAT (see RX_MFF_CTRL1) Bit 10: Disable Timing Patch */ /* MFF_ENA_ALM_FUL (see RX_MFF_CTRL1) Bit 9: Enable Almost Full Sign */ /* MFF_DIS_ALM_FUL (see RX_MFF_CTRL1) Bit 8: Disable Almost Full Sign */ #define MFF_ENA_W4E BIT_7S /* Enable Wait for Empty */ #define MFF_DIS_W4E BIT_6S /* Disable Wait for Empty */ /* MFF_ENA_FLUSH (see RX_MFF_CTRL1) Bit 5: Enable Frame Flushing */ /* MFF_DIS_FLUSH (see RX_MFF_CTRL1) Bit 4: Disable Frame Flushing */ #define MFF_ENA_LOOPB BIT_3S /* Enable Loopback */ #define MFF_DIS_LOOPB BIT_2S /* Disable Loopback */ #define MFF_CLR_MAC_RST BIT_1S /* Clear XMAC Reset */ #define MFF_SET_MAC_RST BIT_0S /* Set XMAC Reset */ #define MFF_TX_CTRL_DEF (MFF_ENA_PKT_REC | MFF_ENA_TIM_PAT | MFF_ENA_FLUSH) /* RX_MFF_TST2 8 bit Receive MAC FIFO Test Register 2 */ /* TX_MFF_TST2 8 bit Transmit MAC FIFO Test Register 2 */ /* Bit 7: reserved */ #define MFF_WSP_T_ON BIT_6S /* Tx: Write Shadow Pointer Test On */ #define MFF_WSP_T_OFF BIT_5S /* Tx: Write Shadow Pointer Test Off */ #define MFF_WSP_INC BIT_4S /* Tx: Write Shadow Pointer Increment */ #define MFF_PC_DEC BIT_3S /* Packet Counter Decrement */ #define MFF_PC_T_ON BIT_2S /* Packet Counter Test On */ #define MFF_PC_T_OFF BIT_1S /* Packet Counter Test Off */ #define MFF_PC_INC BIT_0S /* Packet Counter Increment */ /* RX_MFF_TST1 8 bit Receive MAC FIFO Test Register 1 */ /* TX_MFF_TST1 8 bit Transmit MAC FIFO Test Register 1 */ /* Bit 7: reserved */ #define MFF_WP_T_ON BIT_6S /* Write Pointer Test On */ #define MFF_WP_T_OFF BIT_5S /* Write Pointer Test Off */ #define MFF_WP_INC BIT_4S /* Write Pointer Increment */ /* Bit 3: reserved */ #define MFF_RP_T_ON BIT_2S /* Read Pointer Test On */ #define MFF_RP_T_OFF BIT_1S /* Read Pointer Test Off */ #define MFF_RP_DEC BIT_0S /* Read Pointer Decrement */ /* RX_MFF_CTRL2 8 bit Receive MAC FIFO Control Reg 2 */ /* TX_MFF_CTRL2 8 bit Transmit MAC FIFO Control Reg 2 */ /* Bit 7..4: reserved */ #define MFF_ENA_OP_MD BIT_3S /* Enable Operation Mode */ #define MFF_DIS_OP_MD BIT_2S /* Disable Operation Mode */ #define MFF_RST_CLR BIT_1S /* Clear MAC FIFO Reset */ #define MFF_RST_SET BIT_0S /* Set MAC FIFO Reset */ /* Link LED Counter Registers (GENESIS only) */ /* RX_LED_CTRL 8 bit Receive LED Cnt Control Reg */ /* TX_LED_CTRL 8 bit Transmit LED Cnt Control Reg */ /* Bit 7.. 3: reserved */ #define LED_START BIT_2S /* Start Counter */ #define LED_STOP BIT_1S /* Stop Counter */ #define LED_STATE BIT_0S /* Rx/Tx: LED State, 1=LED On */ /* LNK_SYNC_CTRL 8 bit Link Sync Cnt Control Register */ /* Bit 7.. 3: reserved */ #define LNK_START BIT_2S /* Start Counter */ #define LNK_STOP BIT_1S /* Stop Counter */ #define LNK_CLR_IRQ BIT_0S /* Clear Link IRQ */ /* RX_LED_TST 8 bit Receive LED Cnt Test Register */ /* TX_LED_TST 8 bit Transmit LED Cnt Test Register */ /* LNK_SYNC_TST 8 bit Link Sync Cnt Test Register */ /* Bit 7.. 3: reserved */ #define LED_T_ON BIT_2S /* LED Counter Test mode On */ #define LED_T_OFF BIT_1S /* LED Counter Test mode Off */ #define LED_T_STEP BIT_0S /* LED Counter Step */ /* LNK_LED_REG 8 bit Link LED Register */ /* Bit 7.. 6: reserved */ #define LED_BLK_ON BIT_5S /* Link LED Blinking On */ #define LED_BLK_OFF BIT_4S /* Link LED Blinking Off */ #define LED_SYNC_ON BIT_3S /* Use Sync Wire to switch LED */ #define LED_SYNC_OFF BIT_2S /* Disable Sync Wire Input */ #define LED_ON BIT_1S /* Switch LED On */ #define LED_OFF BIT_0S /* Switch LED Off */ /* Receive and Transmit GMAC FIFO Registers (YUKON only) */ /* RX_GMF_EA 32 bit Rx GMAC FIFO End Address */ /* RX_GMF_AF_THR 32 bit Rx GMAC FIFO Almost Full Thresh. */ /* RX_GMF_WP 32 bit Rx GMAC FIFO Write Pointer */ /* RX_GMF_WLEV 32 bit Rx GMAC FIFO Write Level */ /* RX_GMF_RP 32 bit Rx GMAC FIFO Read Pointer */ /* RX_GMF_RLEV 32 bit Rx GMAC FIFO Read Level */ /* TX_GMF_EA 32 bit Tx GMAC FIFO End Address */ /* TX_GMF_AE_THR 32 bit Tx GMAC FIFO Almost Empty Thresh.*/ /* TX_GMF_WP 32 bit Tx GMAC FIFO Write Pointer */ /* TX_GMF_WSP 32 bit Tx GMAC FIFO Write Shadow Pointer */ /* TX_GMF_WLEV 32 bit Tx GMAC FIFO Write Level */ /* TX_GMF_RP 32 bit Tx GMAC FIFO Read Pointer */ /* TX_GMF_RSTP 32 bit Tx GMAC FIFO Restart Pointer */ /* TX_GMF_RLEV 32 bit Tx GMAC FIFO Read Level */ /* RX_GMF_CTRL_T 32 bit Rx GMAC FIFO Control/Test */ /* Bit 31..28 reserved */ #define RX_TRUNC_ON BIT_27 /* Enable Packet Truncation */ #define RX_TRUNC_OFF BIT_26 /* Disable Packet Truncation */ #define RX_VLAN_STRIP_ON BIT_25 /* Enable VLAN Stripping */ #define RX_VLAN_STRIP_OFF BIT_24 /* Disable VLAN Stripping */ /* Bit 23..15 reserved */ #define GMF_WP_TST_ON BIT_14 /* Write Pointer Test On */ #define GMF_WP_TST_OFF BIT_13 /* Write Pointer Test Off */ #define GMF_WP_STEP BIT_12 /* Write Pointer Step/Increment */ /* Bit 11: reserved */ #define GMF_RP_TST_ON BIT_10 /* Read Pointer Test On */ #define GMF_RP_TST_OFF BIT_9 /* Read Pointer Test Off */ #define GMF_RP_STEP BIT_8 /* Read Pointer Step/Increment */ #define GMF_RX_F_FL_ON BIT_7 /* Rx FIFO Flush Mode On */ #define GMF_RX_F_FL_OFF BIT_6 /* Rx FIFO Flush Mode Off */ #define GMF_CLI_RX_FO BIT_5 /* Clear IRQ Rx FIFO Overrun */ #define GMF_CLI_RX_FC BIT_4 /* Clear IRQ Rx Frame Complete */ #define GMF_OPER_ON BIT_3 /* Operational Mode On */ #define GMF_OPER_OFF BIT_2 /* Operational Mode Off */ #define GMF_RST_CLR BIT_1 /* Clear GMAC FIFO Reset */ #define GMF_RST_SET BIT_0 /* Set GMAC FIFO Reset */ /* TX_GMF_CTRL_T 32 bit Tx GMAC FIFO Control/Test (YUKON and Yukon-2) */ #define TX_STFW_DIS BIT_31 /* Disable Store & Forward (Yukon-EC Ultra) */ #define TX_STFW_ENA BIT_30 /* Enable Store & Forward (Yukon-EC Ultra) */ /* Bits 29..26: reserved */ #define TX_VLAN_TAG_ON BIT_25 /* Enable VLAN tagging */ #define TX_VLAN_TAG_OFF BIT_24 /* Disable VLAN tagging */ #define TX_PCI_JUM_ENA BIT_23 /* Enable PCI Jumbo Mode (Yukon-EC Ultra) */ #define TX_PCI_JUM_DIS BIT_22 /* Disable PCI Jumbo Mode (Yukon-EC Ultra) */ /* Bits 21..19: reserved */ #define GMF_WSP_TST_ON BIT_18 /* Write Shadow Pointer Test On */ #define GMF_WSP_TST_OFF BIT_17 /* Write Shadow Pointer Test Off */ #define GMF_WSP_STEP BIT_16 /* Write Shadow Pointer Step/Increment */ /* Bits 15..8: same as for RX_GMF_CTRL_T */ /* Bit 7: reserved */ #define GMF_CLI_TX_FU BIT_6 /* Clear IRQ Tx FIFO Underrun */ #define GMF_CLI_TX_FC BIT_5 /* Clear IRQ Tx Frame Complete */ #define GMF_CLI_TX_PE BIT_4 /* Clear IRQ Tx Parity Error */ /* Bits 3..0: same as for RX_GMF_CTRL_T */ #define GMF_RX_CTRL_DEF (GMF_OPER_ON | GMF_RX_F_FL_ON) #define GMF_TX_CTRL_DEF GMF_OPER_ON #define RX_GMF_AF_THR_MIN 0x0c /* Rx GMAC FIFO Almost Full Thresh. min. */ #define RX_GMF_FL_THR_DEF 0x0a /* Rx GMAC FIFO Flush Threshold default */ /* GMAC_TI_ST_CTRL 8 bit Time Stamp Timer Ctrl Reg (YUKON only) */ /* Bit 7.. 3: reserved */ #define GMT_ST_START BIT_2S /* Start Time Stamp Timer */ #define GMT_ST_STOP BIT_1S /* Stop Time Stamp Timer */ #define GMT_ST_CLR_IRQ BIT_0S /* Clear Time Stamp Timer IRQ */ /* POLL_CTRL 32 bit Polling Unit control register (Yukon-2 only) */ /* Bit 31.. 6: reserved */ #define PC_CLR_IRQ_CHK BIT_5 /* Clear IRQ Check */ #define PC_POLL_RQ BIT_4 /* Poll Request Start */ #define PC_POLL_OP_ON BIT_3 /* Operational Mode On */ #define PC_POLL_OP_OFF BIT_2 /* Operational Mode Off */ #define PC_POLL_RST_CLR BIT_1 /* Clear Polling Unit Reset (Enable) */ #define PC_POLL_RST_SET BIT_0 /* Set Polling Unit Reset */ /* The bit definition of the following registers is still missing! */ /* B28_Y2_SMB_CONFIG 32 bit ASF SMBus Config Register */ /* B28_Y2_SMB_CSD_REG 32 bit ASF SMB Control/Status/Data */ /* B28_Y2_ASF_IRQ_V_BASE 32 bit ASF IRQ Vector Base */ /* B28_Y2_ASF_STAT_CMD 32 bit ASF Status and Command Reg */ /* This register is used by the host driver software */ /* Bit 31.. 5 reserved */ #define Y2_ASF_OS_PRES BIT_4S /* ASF operation system present */ #define Y2_ASF_RESET BIT_3S /* ASF system in reset state */ #define Y2_ASF_RUNNING BIT_2S /* ASF system operational */ #define Y2_ASF_CLR_HSTI BIT_1S /* Clear ASF IRQ */ #define Y2_ASF_IRQ BIT_0S /* Issue an IRQ to ASF system */ #define Y2_ASF_UC_STATE (3<<2) /* ASF uC State */ #define Y2_ASF_CLK_HALT 0 /* ASF system clock stopped */ /* B28_Y2_ASF_HOST_COM 32 bit ASF Host Communication Reg */ /* This register is used by the ASF firmware */ /* Bit 31.. 2 reserved */ #define Y2_ASF_CLR_ASFI BIT_1 /* Clear host IRQ */ #define Y2_ASF_HOST_IRQ BIT_0 /* Issue an IRQ to HOST system */ /* STAT_CTRL 32 bit Status BMU control register (Yukon-2 only) */ /* Bit 7.. 5: reserved */ #define SC_STAT_CLR_IRQ BIT_4 /* Status Burst IRQ clear */ #define SC_STAT_OP_ON BIT_3 /* Operational Mode On */ #define SC_STAT_OP_OFF BIT_2 /* Operational Mode Off */ #define SC_STAT_RST_CLR BIT_1 /* Clear Status Unit Reset (Enable) */ #define SC_STAT_RST_SET BIT_0 /* Set Status Unit Reset */ /* GMAC_CTRL 32 bit GMAC Control Reg (YUKON only) */ /* Bits 31.. 8: reserved */ #define GMC_H_BURST_ON BIT_7 /* Half Duplex Burst Mode On */ #define GMC_H_BURST_OFF BIT_6 /* Half Duplex Burst Mode Off */ #define GMC_F_LOOPB_ON BIT_5 /* FIFO Loopback On */ #define GMC_F_LOOPB_OFF BIT_4 /* FIFO Loopback Off */ #define GMC_PAUSE_ON BIT_3 /* Pause On */ #define GMC_PAUSE_OFF BIT_2 /* Pause Off */ #define GMC_RST_CLR BIT_1 /* Clear GMAC Reset */ #define GMC_RST_SET BIT_0 /* Set GMAC Reset */ /* GPHY_CTRL 32 bit GPHY Control Reg (YUKON only) */ /* Bits 31..29: reserved */ #define GPC_SEL_BDT BIT_28 /* Select Bi-Dir. Transfer for MDC/MDIO */ #define GPC_INT_POL BIT_27 /* IRQ Polarity is Active Low */ #define GPC_75_OHM BIT_26 /* Use 75 Ohm Termination instead of 50 */ #define GPC_DIS_FC BIT_25 /* Disable Automatic Fiber/Copper Detection */ #define GPC_DIS_SLEEP BIT_24 /* Disable Energy Detect */ #define GPC_HWCFG_M_3 BIT_23 /* HWCFG_MODE[3] */ #define GPC_HWCFG_M_2 BIT_22 /* HWCFG_MODE[2] */ #define GPC_HWCFG_M_1 BIT_21 /* HWCFG_MODE[1] */ #define GPC_HWCFG_M_0 BIT_20 /* HWCFG_MODE[0] */ #define GPC_ANEG_0 BIT_19 /* ANEG[0] */ #define GPC_ENA_XC BIT_18 /* Enable MDI crossover */ #define GPC_DIS_125 BIT_17 /* Disable 125 MHz clock */ #define GPC_ANEG_3 BIT_16 /* ANEG[3] */ #define GPC_ANEG_2 BIT_15 /* ANEG[2] */ #define GPC_ANEG_1 BIT_14 /* ANEG[1] */ #define GPC_ENA_PAUSE BIT_13 /* Enable Pause (SYM_OR_REM) */ #define GPC_PHYADDR_4 BIT_12 /* Bit 4 of PHY Addr */ #define GPC_PHYADDR_3 BIT_11 /* Bit 3 of PHY Addr */ #define GPC_PHYADDR_2 BIT_10 /* Bit 2 of PHY Addr */ #define GPC_PHYADDR_1 BIT_9 /* Bit 1 of PHY Addr */ #define GPC_PHYADDR_0 BIT_8 /* Bit 0 of PHY Addr */ /* Bits 7..2: reserved */ #define GPC_RST_CLR BIT_1 /* Clear GPHY Reset */ #define GPC_RST_SET BIT_0 /* Set GPHY Reset */ /* Yukon-EC Ultra only */ #define GPC_LED_CONF_MSK (7<<6) /* Bit 8.. 6: GPHY LED Config */ #define GPC_PD_125M_CLK_OFF BIT_5 /* Disable Power Down Clock 125 MHz */ #define GPC_PD_125M_CLK_ON BIT_4 /* Enable Power Down Clock 125 MHz */ #define GPC_DPLL_RST_SET BIT_3 /* Set GPHY's DPLL Reset */ #define GPC_DPLL_RST_CLR BIT_2 /* Clear GPHY's DPLL Reset */ /* (DPLL = Digital Phase Lock Loop) */ #define GPC_LED_CONF_VAL(x) (SHIFT6(x) & GPC_LED_CONF_MSK) #define GPC_HWCFG_GMII_COP (GPC_HWCFG_M_3 | GPC_HWCFG_M_2 | \ GPC_HWCFG_M_1 | GPC_HWCFG_M_0) #define GPC_HWCFG_GMII_FIB ( GPC_HWCFG_M_2 | \ GPC_HWCFG_M_1 | GPC_HWCFG_M_0) #define GPC_ANEG_ADV_ALL_M (GPC_ANEG_3 | GPC_ANEG_2 | \ GPC_ANEG_1 | GPC_ANEG_0) /* forced speed and duplex mode (don't mix with other ANEG bits) */ #define GPC_FRC10MBIT_HALF 0 #define GPC_FRC10MBIT_FULL GPC_ANEG_0 #define GPC_FRC100MBIT_HALF GPC_ANEG_1 #define GPC_FRC100MBIT_FULL (GPC_ANEG_0 | GPC_ANEG_1) /* auto-negotiation with limited advertised speeds */ /* mix only with master/slave settings (for copper) */ #define GPC_ADV_1000_HALF GPC_ANEG_2 #define GPC_ADV_1000_FULL GPC_ANEG_3 #define GPC_ADV_ALL (GPC_ANEG_2 | GPC_ANEG_3) /* master/slave settings */ /* only for copper with 1000 Mbps */ #define GPC_FORCE_MASTER 0 #define GPC_FORCE_SLAVE GPC_ANEG_0 #define GPC_PREF_MASTER GPC_ANEG_1 #define GPC_PREF_SLAVE (GPC_ANEG_1 | GPC_ANEG_0) /* GMAC_IRQ_SRC 8 bit GMAC Interrupt Source Reg (YUKON only) */ /* GMAC_IRQ_MSK 8 bit GMAC Interrupt Mask Reg (YUKON only) */ #define GM_IS_RX_CO_OV BIT_5S /* Receive Counter Overflow IRQ */ #define GM_IS_TX_CO_OV BIT_4S /* Transmit Counter Overflow IRQ */ #define GM_IS_TX_FF_UR BIT_3S /* Transmit FIFO Underrun */ #define GM_IS_TX_COMPL BIT_2S /* Frame Transmission Complete */ #define GM_IS_RX_FF_OR BIT_1S /* Receive FIFO Overrun */ #define GM_IS_RX_COMPL BIT_0S /* Frame Reception Complete */ #define GMAC_DEF_MSK (GM_IS_RX_CO_OV | GM_IS_TX_CO_OV | \ GM_IS_TX_FF_UR) /* GMAC_LINK_CTRL 16 bit Link Control Reg (YUKON only) */ /* Bits 15.. 2: reserved */ #define GMLC_RST_CLR BIT_1S /* Clear Link Reset */ #define GMLC_RST_SET BIT_0S /* Set Link Reset */ /* WOL_CTRL_STAT 16 bit WOL Control/Status Reg */ #define WOL_CTL_LINK_CHG_OCC BIT_15S #define WOL_CTL_MAGIC_PKT_OCC BIT_14S #define WOL_CTL_PATTERN_OCC BIT_13S #define WOL_CTL_CLEAR_RESULT BIT_12S #define WOL_CTL_ENA_PME_ON_LINK_CHG BIT_11S #define WOL_CTL_DIS_PME_ON_LINK_CHG BIT_10S #define WOL_CTL_ENA_PME_ON_MAGIC_PKT BIT_9S #define WOL_CTL_DIS_PME_ON_MAGIC_PKT BIT_8S #define WOL_CTL_ENA_PME_ON_PATTERN BIT_7S #define WOL_CTL_DIS_PME_ON_PATTERN BIT_6S #define WOL_CTL_ENA_LINK_CHG_UNIT BIT_5S #define WOL_CTL_DIS_LINK_CHG_UNIT BIT_4S #define WOL_CTL_ENA_MAGIC_PKT_UNIT BIT_3S #define WOL_CTL_DIS_MAGIC_PKT_UNIT BIT_2S #define WOL_CTL_ENA_PATTERN_UNIT BIT_1S #define WOL_CTL_DIS_PATTERN_UNIT BIT_0S #define WOL_CTL_DEFAULT \ (WOL_CTL_DIS_PME_ON_LINK_CHG | \ WOL_CTL_DIS_PME_ON_PATTERN | \ WOL_CTL_DIS_PME_ON_MAGIC_PKT | \ WOL_CTL_DIS_LINK_CHG_UNIT | \ WOL_CTL_DIS_PATTERN_UNIT | \ WOL_CTL_DIS_MAGIC_PKT_UNIT) /* WOL_MATCH_CTL 8 bit WOL Match Control Reg */ #define WOL_CTL_PATT_ENA(x) (BIT_0 << (x)) /* WOL_PATT_PME 8 bit WOL PME Match Enable (Yukon-2) */ #define WOL_PATT_FORCE_PME BIT_7 /* Generates a PME */ #define WOL_PATT_MATCH_PME_ALL 0x7f #define SK_NUM_WOL_PATTERN 7 #define SK_PATTERN_PER_WORD 4 #define SK_BITMASK_PATTERN 7 #define SK_POW_PATTERN_LENGTH 128 #define WOL_LENGTH_MSK 0x7f #define WOL_LENGTH_SHIFT 8 /* typedefs ******************************************************************/ /* Receive and Transmit Descriptors ******************************************/ /* Transmit Descriptor struct */ typedef struct s_HwTxd { SK_U32 volatile TxCtrl; /* Transmit Buffer Control Field */ SK_U32 TxNext; /* Physical Address Pointer to the next TxD */ SK_U32 TxAdrLo; /* Physical Tx Buffer Address lower DWord */ SK_U32 TxAdrHi; /* Physical Tx Buffer Address upper DWord */ SK_U32 TxStat; /* Transmit Frame Status Word */ #ifndef SK_USE_REV_DESC SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ SK_U16 TxRes1; /* 16 bit reserved field */ SK_U16 TxTcpWp; /* TCP Checksum Write Position */ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ #else /* SK_USE_REV_DESC */ SK_U16 TxRes1; /* 16 bit reserved field */ SK_U16 TxTcpOffs; /* TCP Checksum Calculation Start Value */ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ SK_U16 TxTcpWp; /* TCP Checksum Write Position */ #endif /* SK_USE_REV_DESC */ SK_U32 TxRes2; /* 32 bit reserved field */ } __attribute__ ((packed)) SK_HWTXD; /* Marvell - uboot: should be packed */ /* Receive Descriptor struct */ typedef struct s_HwRxd { SK_U32 volatile RxCtrl; /* Receive Buffer Control Field */ SK_U32 RxNext; /* Physical Address Pointer to the next RxD */ SK_U32 RxAdrLo; /* Physical Rx Buffer Address lower DWord */ SK_U32 RxAdrHi; /* Physical Rx Buffer Address upper DWord */ SK_U32 RxStat; /* Receive Frame Status Word */ SK_U32 RxTiSt; /* Receive Time Stamp (from XMAC on GENESIS) */ #ifndef SK_USE_REV_DESC SK_U16 RxTcpSum1; /* Rx TCP Checksum 1 */ SK_U16 RxTcpSum2; /* Rx TCP Checksum 2 */ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ #else /* SK_USE_REV_DESC */ SK_U16 RxTcpSum2; /* Rx TCP Checksum 2 */ SK_U16 RxTcpSum1; /* Rx TCP Checksum 1 */ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWRXD;/* Marvell - uboot: should be packed */ /* * Drivers which use the reverse descriptor feature (PCI_OUR_REG_2) * should set the define SK_USE_REV_DESC. * Structures are 'normally' not endianess dependent. But in this case * the SK_U16 fields are bound to bit positions inside the descriptor. * RxTcpSum1 e.g. must start at bit 0 within the 7.th DWord. * The bit positions inside a DWord are of course endianess dependent and * swap if the DWord is swapped by the hardware. */ /* YUKON-2 descriptors ******************************************************/ typedef struct _TxChksum { #ifndef SK_USE_REV_DESC SK_U16 TxTcpWp; /* TCP Checksum Write Position */ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ #else /* SK_USE_REV_DESC */ SK_U16 TxTcpSp; /* TCP Checksum Calculation Start Position */ SK_U16 TxTcpWp; /* TCP Checksum Write Position */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWTXCS;/* Marvell - uboot: should be packed */ typedef struct _LargeSend { #ifndef SK_USE_REV_DESC SK_U16 Length; /* Large Send Segment Length */ SK_U16 Reserved; /* reserved */ #else /* SK_USE_REV_DESC */ SK_U16 Reserved; /* reserved */ SK_U16 Length; /* Large Send Segment Length */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWTXLS;/* Marvell - uboot: should be packed */ typedef union u_HwTxBuf { SK_U16 BufLen; /* Tx Buffer Length */ SK_U16 VlanTag; /* VLAN Tag */ SK_U16 InitCsum; /* Init. Checksum */ } __attribute__ ((packed)) SK_HWTXBUF;/* Marvell - uboot: should be packed */ /* Tx List Element structure */ typedef struct s_HwLeTx { union { SK_U32 BufAddr; /* Tx LE Buffer Address high/low */ SK_HWTXCS ChkSum; /* Tx LE TCP Checksum parameters */ SK_HWTXLS LargeSend;/* Large Send length */ } __attribute__ ((packed)) TxUn;/* Marvell - uboot: should be packed */ #ifndef SK_USE_REV_DESC SK_HWTXBUF Send; SK_U8 ControlFlags; /* Tx LE Control field or Lock Number */ SK_U8 Opcode; /* Tx LE Opcode field */ #else /* SK_USE_REV_DESC */ SK_U8 Opcode; /* Tx LE Opcode field */ SK_U8 ControlFlags; /* Tx LE Control field or Lock Number */ SK_HWTXBUF Send; #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWLETX;/* Marvell - uboot: should be packed */ typedef struct _RxChkSum{ #ifndef SK_USE_REV_DESC SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ #else /* SK_USE_REV_DESC */ SK_U16 RxTcpSp2; /* TCP Checksum Calculation Start Position 2 */ SK_U16 RxTcpSp1; /* TCP Checksum Calculation Start Position 1 */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWRXCS;/* Marvell - uboot: should be packed */ /* Rx List Element structure */ typedef struct s_HwLeRx { union { SK_U32 BufAddr; /* Rx LE Buffer Address high/low */ SK_HWRXCS ChkSum; /* Rx LE TCP Checksum parameters */ } __attribute__ ((packed))RxUn;/* Marvell - uboot: should be packed */ #ifndef SK_USE_REV_DESC SK_U16 BufferLength; /* Rx LE Buffer Length field */ SK_U8 ControlFlags; /* Rx LE Control field */ SK_U8 Opcode; /* Rx LE Opcode field */ #else /* SK_USE_REV_DESC */ SK_U8 Opcode; /* Rx LE Opcode field */ SK_U8 ControlFlags; /* Rx LE Control field */ SK_U16 BufferLength; /* Rx LE Buffer Length field */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWLERX;/* Marvell - uboot: should be packed */ typedef struct s_StRxTCPChkSum { #ifndef SK_USE_REV_DESC SK_U16 RxTCPSum1; /* Rx TCP Checksum 1 */ SK_U16 RxTCPSum2; /* Rx TCP Checksum 2 */ #else /* SK_USE_REV_DESC */ SK_U16 RxTCPSum2; /* Rx TCP Checksum 2 */ SK_U16 RxTCPSum1; /* Rx TCP Checksum 1 */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWSTCS;/* Marvell - uboot: should be packed */ typedef struct s_StRxRssFlags { #ifndef SK_USE_REV_DESC SK_U8 FlagField; /* contains TCP and IP flags */ SK_U8 reserved; /* reserved */ #else /* SK_USE_REV_DESC */ SK_U8 reserved; /* reserved */ SK_U8 FlagField; /* contains TCP and IP flags */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWSTRSS;/* Marvell - uboot: should be packed */ /* bit definition of RSS LE bit 32/33 (SK_HWSTRSS.FlagField) */ /* bit 7..2 reserved */ #define RSS_TCP_FLAG BIT_1S /* RSS value related to TCP area */ #define RSS_IP_FLAG BIT_0S /* RSS value related to IP area */ /* StRxRssValue is valid if at least RSS_IP_FLAG is set */ /* For protocol errors or other protocols an empty RSS LE is generated */ typedef union u_HwStBuf { SK_U16 BufLen; /* Rx Buffer Length */ SK_U16 VlanTag; /* VLAN Tag */ SK_U16 StTxStatHi; /* Tx Queue Status (high) */ SK_HWSTRSS Rss; /* Flag Field for TCP and IP protocol */ } __attribute__ ((packed)) SK_HWSTBUF;/* Marvell - uboot: should be packed */ /* Status List Element structure */ typedef struct s_HwLeSt { union { SK_U32 StRxStatWord; /* Rx Status Dword */ SK_U32 StRxTimeStamp; /* Rx Timestamp */ SK_HWSTCS StRxTCPCSum; /* Rx TCP Checksum */ SK_U32 StTxStatLow; /* Tx Queue Status (low) */ SK_U32 StRxRssValue; /* Rx RSS value */ } __attribute__ ((packed)) StUn;/* Marvell - uboot: should be packed */ #ifndef SK_USE_REV_DESC SK_HWSTBUF Stat; SK_U8 Link; /* Status LE Link field */ SK_U8 Opcode; /* Status LE Opcode field */ #else /* SK_USE_REV_DESC */ SK_U8 Opcode; /* Status LE Opcode field */ SK_U8 Link; /* Status LE Link field */ SK_HWSTBUF Stat; #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWLEST;/* Marvell - uboot: should be packed */ /* Special Action List Element */ typedef struct s_HwLeSa { #ifndef SK_USE_REV_DESC SK_U16 TxAIdxVld; /* Special Action LE TxA Put Index field */ SK_U16 TxSIdxVld; /* Special Action LE TxS Put Index field */ SK_U16 RxIdxVld; /* Special Action LE Rx Put Index field */ SK_U8 Link; /* Special Action LE Link field */ SK_U8 Opcode; /* Special Action LE Opcode field */ #else /* SK_USE_REV_DESC */ SK_U16 TxSIdxVld; /* Special Action LE TxS Put Index field */ SK_U16 TxAIdxVld; /* Special Action LE TxA Put Index field */ SK_U8 Opcode; /* Special Action LE Opcode field */ SK_U8 Link; /* Special Action LE Link field */ SK_U16 RxIdxVld; /* Special Action LE Rx Put Index field */ #endif /* SK_USE_REV_DESC */ } __attribute__ ((packed)) SK_HWLESA;/* Marvell - uboot: should be packed */ /* Common List Element union */ typedef union u_HwLeTxRxSt { /* Transmit List Element Structure */ SK_HWLETX Tx; /* Receive List Element Structure */ SK_HWLERX Rx; /* Status List Element Structure */ SK_HWLEST St; /* Special Action List Element Structure */ SK_HWLESA Sa; /* Full List Element */ SK_U64 Full; } SK_HWLE;__attribute__ ((packed)) SK_HWLE;/* Marvell - uboot: should be packed */ /* mask and shift value to get Tx async queue status for port 1 */ #define STLE_TXA1_MSKL 0x00000fff #define STLE_TXA1_SHIFTL 0 /* mask and shift value to get Tx sync queue status for port 1 */ #define STLE_TXS1_MSKL 0x00fff000 #define STLE_TXS1_SHIFTL 12 /* mask and shift value to get Tx async queue status for port 2 */ #define STLE_TXA2_MSKL 0xff000000 #define STLE_TXA2_SHIFTL 24 #define STLE_TXA2_MSKH 0x000f /* this one shifts up */ #define STLE_TXA2_SHIFTH 8 /* mask and shift value to get Tx sync queue status for port 2 */ #define STLE_TXS2_MSKL 0x00000000 #define STLE_TXS2_SHIFTL 0 #define STLE_TXS2_MSKH 0xfff0 #define STLE_TXS2_SHIFTH 4 /* YUKON-2 bit values */ #define HW_OWNER BIT_7 #define SW_OWNER 0 #define PU_PUTIDX_VALID BIT_12 /* YUKON-2 Control flags */ #define UDPTCP BIT_0S #define CALSUM BIT_1S #define WR_SUM BIT_2S #define INIT_SUM BIT_3S #define LOCK_SUM BIT_4S #define INS_VLAN BIT_5S #define FRC_STAT BIT_6S #define EOP BIT_7S #define TX_LOCK BIT_8S #define BUF_SEND BIT_9S #define PACKET_SEND BIT_10S #define NO_WARNING BIT_14S #define NO_UPDATE BIT_15S /* YUKON-2 Rx/Tx opcodes defines */ #define OP_TCPWRITE 0x11 #define OP_TCPSTART 0x12 #define OP_TCPINIT 0x14 #define OP_TCPLCK 0x18 #define OP_TCPCHKSUM OP_TCPSTART #define OP_TCPIS (OP_TCPINIT | OP_TCPSTART) #define OP_TCPLW (OP_TCPLCK | OP_TCPWRITE) #define OP_TCPLSW (OP_TCPLCK | OP_TCPSTART | OP_TCPWRITE) #define OP_TCPLISW (OP_TCPLCK | OP_TCPINIT | OP_TCPSTART | OP_TCPWRITE) #define OP_ADDR64 0x21 #define OP_VLAN 0x22 #define OP_ADDR64VLAN (OP_ADDR64 | OP_VLAN) #define OP_LRGLEN 0x24 #define OP_LRGLENVLAN (OP_LRGLEN | OP_VLAN) #define OP_BUFFER 0x40 #define OP_PACKET 0x41 #define OP_LARGESEND 0x43 /* YUKON-2 STATUS opcodes defines */ #define OP_RXSTAT 0x60 #define OP_RXTIMESTAMP 0x61 #define OP_RXVLAN 0x62 #define OP_RXCHKS 0x64 #define OP_RXCHKSVLAN (OP_RXCHKS | OP_RXVLAN) #define OP_RXTIMEVLAN (OP_RXTIMESTAMP | OP_RXVLAN) #define OP_RSS_HASH 0x65 #define OP_TXINDEXLE 0x68 /* YUKON-2 SPECIAL opcodes defines */ #define OP_PUTIDX 0x70 /* Descriptor Bit Definition */ /* TxCtrl Transmit Buffer Control Field */ /* RxCtrl Receive Buffer Control Field */ #define BMU_OWN BIT_31 /* OWN bit: 0=host/1=BMU */ #define BMU_STF BIT_30 /* Start of Frame */ #define BMU_EOF BIT_29 /* End of Frame */ #define BMU_IRQ_EOB BIT_28 /* Req "End of Buffer" IRQ */ #define BMU_IRQ_EOF BIT_27 /* Req "End of Frame" IRQ */ /* TxCtrl specific bits */ #define BMU_STFWD BIT_26 /* (Tx) Store & Forward Frame */ #define BMU_NO_FCS BIT_25 /* (Tx) Disable MAC FCS (CRC) generation */ #define BMU_SW BIT_24 /* (Tx) 1 bit res. for SW use */ /* RxCtrl specific bits */ #define BMU_DEV_0 BIT_26 /* (Rx) Transfer data to Dev0 */ #define BMU_STAT_VAL BIT_25 /* (Rx) Rx Status Valid */ #define BMU_TIST_VAL BIT_24 /* (Rx) Rx TimeStamp Valid */ /* Bit 23..16: BMU Check Opcodes */ #define BMU_CHECK (0x55L<<16) /* Default BMU check */ #define BMU_TCP_CHECK (0x56L<<16) /* Descr with TCP ext */ #define BMU_UDP_CHECK (0x57L<<16) /* Descr with UDP ext (YUKON only) */ #define BMU_BBC 0xffffL /* Bit 15.. 0: Buffer Byte Counter */ /* TxStat Transmit Frame Status Word */ /* RxStat Receive Frame Status Word */ /* *Note: TxStat is reserved for ASIC loopback mode only * * The Bits of the Status words are defined in xmac_ii.h * (see XMR_FS bits) */ /* macros ********************************************************************/ /* Macro for accessing the key registers */ #define RSS_KEY_ADDR(Port, KeyIndex) \ ((B4_RSS_KEY | ( ((Port) == 0) ? 0 : 0x80)) + (KeyIndex)) /* Receive and Transmit Queues */ #define Q_R1 0x0000 /* Receive Queue 1 */ #define Q_R2 0x0080 /* Receive Queue 2 */ #define Q_XS1 0x0200 /* Synchronous Transmit Queue 1 */ #define Q_XA1 0x0280 /* Asynchronous Transmit Queue 1 */ #define Q_XS2 0x0300 /* Synchronous Transmit Queue 2 */ #define Q_XA2 0x0380 /* Asynchronous Transmit Queue 2 */ #define Q_ASF_R1 0x100 /* ASF Rx Queue 1 */ #define Q_ASF_R2 0x180 /* ASF Rx Queue 2 */ #define Q_ASF_T1 0x140 /* ASF Tx Queue 1 */ #define Q_ASF_T2 0x1c0 /* ASF Tx Queue 2 */ /* * Macro Q_ADDR() * * Use this macro to access the Receive and Transmit Queue Registers. * * para: * Queue Queue to access. * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 * Offs Queue register offset. * Values: Q_D, Q_DA_L ... Q_T2, Q_T3 * * usage SK_IN32(IoC, Q_ADDR(Q_R2, Q_BC), pVal) */ #define Q_ADDR(Queue, Offs) (B8_Q_REGS + (Queue) + (Offs)) /* * Macro Y2_PREF_Q_ADDR() * * Use this macro to access the Prefetch Units of the receive and * transmit queues of Yukon-2. * * para: * Queue Queue to access. * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, Q_XA2, * Offs Queue register offset. * Values: PREF_UNIT_CTRL_REG ... PREF_UNIT_FIFO_LEV_REG * * usage SK_IN16(IoC, Y2_Q_ADDR(Q_R2, PREF_UNIT_GET_IDX_REG), pVal) */ #define Y2_PREF_Q_ADDR(Queue, Offs) (Y2_B8_PREF_REGS + (Queue) + (Offs)) /* * Macro RB_ADDR() * * Use this macro to access the RAM Buffer Registers. * * para: * Queue Queue to access. * Values: Q_R1, Q_R2, Q_XS1, Q_XA1, Q_XS2, and Q_XA2 * Offs Queue register offset. * Values: RB_START, RB_END ... RB_LEV, RB_CTRL * * usage SK_IN32(IoC, RB_ADDR(Q_R2, RB_RP), pVal) */ #define RB_ADDR(Queue, Offs) (B16_RAM_REGS + (Queue) + (Offs)) /* MAC Related Registers */ #define MAC_1 0 /* 1st port */ #define MAC_2 1 /* 2nd port */ /* * Macro MR_ADDR() * * Use this macro to access a MAC Related Registers inside the ASIC. * * para: * Mac MAC to access. * Values: MAC_1, MAC_2 * Offs MAC register offset. * Values: RX_MFF_EA, RX_MFF_WP ... LNK_LED_REG, * TX_MFF_EA, TX_MFF_WP ... TX_LED_TST * * usage SK_IN32(IoC, MR_ADDR(MAC_1, TX_MFF_EA), pVal) */ #define MR_ADDR(Mac, Offs) (((Mac) << 7) + (Offs)) /* * macros to access the XMAC (GENESIS only) * * XM_IN16(), to read a 16 bit register (e.g. XM_MMU_CMD) * XM_OUT16(), to write a 16 bit register (e.g. XM_MMU_CMD) * XM_IN32(), to read a 32 bit register (e.g. XM_TX_EV_CNT) * XM_OUT32(), to write a 32 bit register (e.g. XM_TX_EV_CNT) * XM_INADDR(), to read a network address register (e.g. XM_SRC_CHK) * XM_OUTADDR(), to write a network address register (e.g. XM_SRC_CHK) * XM_INHASH(), to read the XM_HSM_CHK register * XM_OUTHASH() to write the XM_HSM_CHK register * * para: * Mac XMAC to access values: MAC_1 or MAC_2 * IoC I/O context needed for SK I/O macros * Reg XMAC Register to read or write * (p)Val Value or pointer to the value which should be read or written * * usage: XM_OUT16(IoC, MAC_1, XM_MMU_CMD, Value); */ #define XMA(Mac, Reg) \ ((BASE_XMAC_1 + (Mac) * (BASE_XMAC_2 - BASE_XMAC_1)) | ((Reg) << 1)) #define XM_IN16(IoC, Mac, Reg, pVal) \ SK_IN16(IoC, XMA(Mac, Reg), pVal) #define XM_OUT16(IoC, Mac, Reg, Val) \ SK_OUT16(IoC, XMA(Mac, Reg), Val) #ifdef SK_LITTLE_ENDIAN #define XM_IN32(IoC, Mac, Reg, pVal) { \ SK_IN16(IoC, XMA(Mac, Reg), (SK_U16 SK_FAR *)(pVal)); \ SK_IN16(IoC, XMA(Mac, (Reg) + 2), (SK_U16 SK_FAR *)(pVal) + 1); \ } #else /* !SK_LITTLE_ENDIAN */ #define XM_IN32(IoC, Mac, Reg, pVal) { \ SK_IN16(IoC, XMA(Mac, Reg), (SK_U16 SK_FAR *)(pVal) + 1); \ SK_IN16(IoC, XMA(Mac, (Reg) + 2), (SK_U16 SK_FAR *)(pVal)); \ } #endif /* !SK_LITTLE_ENDIAN */ #define XM_OUT32(IoC, Mac, Reg, Val) { \ SK_OUT16(IoC, XMA(Mac, Reg), (SK_U16)((Val) & 0xffffL)); \ SK_OUT16(IoC, XMA(Mac, (Reg) + 2), (SK_U16)(((Val) >> 16) & 0xffffL)); \ } /* Remember: we are always writing to / reading from LITTLE ENDIAN memory */ #define XM_INADDR(IoC, Mac, Reg, pVal) { \ SK_U16 Word; \ SK_U8 *pByte; \ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ pByte[0] = (SK_U8)(Word & 0x00ff); \ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), XMA((Mac), (Reg) + 2), &Word); \ pByte[2] = (SK_U8)(Word & 0x00ff); \ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), XMA((Mac), (Reg) + 4), &Word); \ pByte[4] = (SK_U8)(Word & 0x00ff); \ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ } #define XM_OUTADDR(IoC, Mac, Reg, pVal) { \ SK_U8 SK_FAR *pByte; \ pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ (((SK_U16)(pByte[0]) & 0x00ff) | \ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ SK_OUT16((IoC), XMA((Mac), (Reg) + 2), (SK_U16) \ (((SK_U16)(pByte[2]) & 0x00ff) | \ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ SK_OUT16((IoC), XMA((Mac), (Reg) + 4), (SK_U16) \ (((SK_U16)(pByte[4]) & 0x00ff) | \ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ } #define XM_INHASH(IoC, Mac, Reg, pVal) { \ SK_U16 Word; \ SK_U8 SK_FAR *pByte; \ pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ SK_IN16((IoC), XMA((Mac), (Reg)), &Word); \ pByte[0] = (SK_U8)(Word & 0x00ff); \ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), XMA((Mac), (Reg) + 2), &Word); \ pByte[2] = (SK_U8)(Word & 0x00ff); \ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), XMA((Mac), (Reg) + 4), &Word); \ pByte[4] = (SK_U8)(Word & 0x00ff); \ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), XMA((Mac), (Reg) + 6), &Word); \ pByte[6] = (SK_U8)(Word & 0x00ff); \ pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ } #define XM_OUTHASH(IoC, Mac, Reg, pVal) { \ SK_U8 SK_FAR *pByte; \ pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ SK_OUT16((IoC), XMA((Mac), (Reg)), (SK_U16) \ (((SK_U16)(pByte[0]) & 0x00ff)| \ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ SK_OUT16((IoC), XMA((Mac), (Reg) + 2), (SK_U16) \ (((SK_U16)(pByte[2]) & 0x00ff)| \ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ SK_OUT16((IoC), XMA((Mac), (Reg) + 4), (SK_U16) \ (((SK_U16)(pByte[4]) & 0x00ff)| \ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ SK_OUT16((IoC), XMA((Mac), (Reg) + 6), (SK_U16) \ (((SK_U16)(pByte[6]) & 0x00ff)| \ (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ } /* * macros to access the GMAC (YUKON only) * * GM_IN16(), to read a 16 bit register (e.g. GM_GP_STAT) * GM_OUT16(), to write a 16 bit register (e.g. GM_GP_CTRL) * GM_IN32(), to read a 32 bit register (e.g. GM_RXF_UC_OK) * GM_OUT32(), to write a 32 bit register * GM_INADDR(), to read a network address register (e.g. GM_SRC_ADDR_1L) * GM_OUTADDR(), to write a network address register (e.g. GM_SRC_ADDR_2L) * GM_INHASH(), to read the hash registers (e.g. GM_MC_ADDR_H1..4) * GM_OUTHASH() to write the hash registers (e.g. GM_MC_ADDR_H1..4) * * para: * Mac GMAC to access values: MAC_1 or MAC_2 * IoC I/O context needed for SK I/O macros * Reg GMAC Register to read or write * (p)Val Value or pointer to the value which should be read or written * * usage: GM_OUT16(IoC, MAC_1, GM_GP_CTRL, Value); */ #define GMA(Mac, Reg) \ ((BASE_GMAC_1 + (Mac) * (BASE_GMAC_2 - BASE_GMAC_1)) | (Reg)) #define GM_IN16(IoC, Mac, Reg, pVal) \ SK_IN16(IoC, GMA(Mac, Reg), pVal) #define GM_OUT16(IoC, Mac, Reg, Val) \ SK_OUT16(IoC, GMA(Mac, Reg), Val) #ifdef SK_LITTLE_ENDIAN #define GM_IN32(IoC, Mac, Reg, pVal) { \ SK_IN16(IoC, GMA(Mac, Reg), (SK_U16 SK_FAR *)(pVal)); \ SK_IN16((IoC), GMA(Mac, (Reg) + 4), (SK_U16 SK_FAR *)(pVal) + 1); \ } #else /* !SK_LITTLE_ENDIAN */ #define GM_IN32(IoC, Mac, Reg, pVal) { \ SK_IN16(IoC, GMA(Mac, Reg), (SK_U16 SK_FAR *)(pVal) + 1); \ SK_IN16(IoC, GMA(Mac, (Reg) + 4), (SK_U16 SK_FAR *)(pVal)); \ } #endif /* !SK_LITTLE_ENDIAN */ #define GM_OUT32(IoC, Mac, Reg, Val) { \ SK_OUT16(IoC, GMA(Mac, Reg), (SK_U16)((Val) & 0xffffL)); \ SK_OUT16(IoC, GMA(Mac, (Reg) + 4), (SK_U16)(((Val) >> 16) & 0xffffL)); \ } #define GM_INADDR(IoC, Mac, Reg, pVal) { \ SK_U16 Word; \ SK_U8 *pByte; \ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ pByte[0] = (SK_U8)(Word & 0x00ff); \ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), GMA((Mac), (Reg) + 4), &Word); \ pByte[2] = (SK_U8)(Word & 0x00ff); \ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), GMA((Mac), (Reg) + 8), &Word); \ pByte[4] = (SK_U8)(Word & 0x00ff); \ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ } #define GM_OUTADDR(IoC, Mac, Reg, pVal) { \ SK_U8 SK_FAR *pByte; \ pByte = (SK_U8 SK_FAR *)&((SK_U8 SK_FAR *)(pVal))[0]; \ SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ (((SK_U16)(pByte[0]) & 0x00ff) | \ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ SK_OUT16((IoC), GMA((Mac), (Reg) + 4), (SK_U16) \ (((SK_U16)(pByte[2]) & 0x00ff) | \ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ SK_OUT16((IoC), GMA((Mac), (Reg) + 8), (SK_U16) \ (((SK_U16)(pByte[4]) & 0x00ff) | \ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ } #define GM_INHASH(IoC, Mac, Reg, pVal) { \ SK_U16 Word; \ SK_U8 *pByte; \ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ SK_IN16((IoC), GMA((Mac), (Reg)), &Word); \ pByte[0] = (SK_U8)(Word & 0x00ff); \ pByte[1] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), GMA((Mac), (Reg) + 4), &Word); \ pByte[2] = (SK_U8)(Word & 0x00ff); \ pByte[3] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), GMA((Mac), (Reg) + 8), &Word); \ pByte[4] = (SK_U8)(Word & 0x00ff); \ pByte[5] = (SK_U8)((Word >> 8) & 0x00ff); \ SK_IN16((IoC), GMA((Mac), (Reg) + 12), &Word); \ pByte[6] = (SK_U8)(Word & 0x00ff); \ pByte[7] = (SK_U8)((Word >> 8) & 0x00ff); \ } #define GM_OUTHASH(IoC, Mac, Reg, pVal) { \ SK_U8 *pByte; \ pByte = (SK_U8 *)&((SK_U8 *)(pVal))[0]; \ SK_OUT16((IoC), GMA((Mac), (Reg)), (SK_U16) \ (((SK_U16)(pByte[0]) & 0x00ff)| \ (((SK_U16)(pByte[1]) << 8) & 0xff00))); \ SK_OUT16((IoC), GMA((Mac), (Reg) + 4), (SK_U16) \ (((SK_U16)(pByte[2]) & 0x00ff)| \ (((SK_U16)(pByte[3]) << 8) & 0xff00))); \ SK_OUT16((IoC), GMA((Mac), (Reg) + 8), (SK_U16) \ (((SK_U16)(pByte[4]) & 0x00ff)| \ (((SK_U16)(pByte[5]) << 8) & 0xff00))); \ SK_OUT16((IoC), GMA((Mac), (Reg) + 12), (SK_U16) \ (((SK_U16)(pByte[6]) & 0x00ff)| \ (((SK_U16)(pByte[7]) << 8) & 0xff00))); \ } /* * Different MAC Types */ #define SK_MAC_XMAC 0 /* Xaqti XMAC II */ #define SK_MAC_GMAC 1 /* Marvell GMAC */ /* * Different PHY Types */ #define SK_PHY_XMAC 0 /* integrated in XMAC II */ #define SK_PHY_BCOM 1 /* Broadcom BCM5400 */ #define SK_PHY_LONE 2 /* Level One LXT1000 */ #define SK_PHY_NAT 3 /* National DP83891 */ #define SK_PHY_MARV_COPPER 4 /* Marvell 88E1040S */ #define SK_PHY_MARV_FIBER 5 /* Marvell 88E1040S working on fiber */ /* * PHY addresses (bits 12..8 of PHY address reg) */ #define PHY_ADDR_XMAC (0<<8) #define PHY_ADDR_BCOM (1<<8) #define PHY_ADDR_LONE (3<<8) #define PHY_ADDR_NAT (0<<8) /* GPHY address (bits 15..11 of SMI control reg) */ #define PHY_ADDR_MARV 0 /* * macros to access the PHY * * PHY_READ() read a 16 bit value from the PHY * PHY_WRITE() write a 16 bit value to the PHY * * para: * IoC I/O context needed for SK I/O macros * pPort Pointer to port struct for PhyAddr * Mac XMAC to access values: MAC_1 or MAC_2 * PhyReg PHY Register to read or write * (p)Val Value or pointer to the value which should be read or * written. * * usage: PHY_READ(IoC, pPort, MAC_1, PHY_CTRL, Value); * Warning: a PHY_READ on an uninitialized PHY (PHY still in reset) never * comes back. This is checked in DEBUG mode. */ #ifndef DEBUG #define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ SK_U16 Mmu; \ \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ } \ } #else #define PHY_READ(IoC, pPort, Mac, PhyReg, pVal) { \ SK_U16 Mmu; \ int __i = 0; \ \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ __i++; \ if (__i > 100000) { \ SK_DBG_PRINTF("*****************************\n"); \ SK_DBG_PRINTF("PHY_READ on uninitialized PHY\n"); \ SK_DBG_PRINTF("*****************************\n"); \ break; \ } \ } while ((Mmu & XM_MMU_PHY_RDY) == 0); \ XM_IN16((IoC), (Mac), XM_PHY_DATA, (pVal)); \ } \ } #endif /* DEBUG */ #define PHY_WRITE(IoC, pPort, Mac, PhyReg, Val) { \ SK_U16 Mmu; \ \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ } \ XM_OUT16((IoC), (Mac), XM_PHY_ADDR, (PhyReg) | (pPort)->PhyAddr); \ XM_OUT16((IoC), (Mac), XM_PHY_DATA, (Val)); \ if ((pPort)->PhyType != SK_PHY_XMAC) { \ do { \ XM_IN16((IoC), (Mac), XM_MMU_CMD, &Mmu); \ } while ((Mmu & XM_MMU_PHY_BUSY) != 0); \ } \ } /* * Macro PCI_C() * * Use this macro to access PCI config register from the I/O space. * * para: * pAC Pointer to adapter context * Addr PCI configuration register to access. * Values: PCI_VENDOR_ID ... PCI_VPD_ADR_REG, * * usage SK_IN16(IoC, PCI_C(pAC, PCI_VENDOR_ID), pVal); */ #define PCI_C(p, Addr) \ (((CHIP_ID_YUKON_2(p)) ? Y2_CFG_SPC : B7_CFG_SPC) + (Addr)) /* * Macro SK_HW_ADDR(Base, Addr) * * Calculates the effective HW address * * para: * Base I/O or memory base address * Addr Address offset * * usage: May be used in SK_INxx and SK_OUTxx macros * #define SK_IN8(IoC, Addr, pVal) ...\ * *pVal = (SK_U8)inp(SK_HW_ADDR(pAC->Hw.Iop, Addr))) */ #ifdef SK_MEM_MAPPED_IO #define SK_HW_ADDR(Base, Addr) ((Base) + (Addr)) #else /* SK_MEM_MAPPED_IO */ #define SK_HW_ADDR(Base, Addr) \ ((Base) + (((Addr) & 0x7f) | (((Addr) >> 7 > 0) ? 0x80 : 0))) #endif /* SK_MEM_MAPPED_IO */ #define SZ_LONG (sizeof(SK_U32)) /* * Macro SK_HWAC_LINK_LED() * * Use this macro to set the link LED mode. * para: * pAC Pointer to adapter context struct * IoC I/O context needed for SK I/O macros * Port Port number * Mode Mode to set for this LED */ #define SK_HWAC_LINK_LED(pAC, IoC, Port, Mode) \ SK_OUT8(IoC, MR_ADDR(Port, LNK_LED_REG), Mode); #define SK_SET_GP_IO(IoC, Bit) { \ SK_U32 DWord; \ SK_IN32(IoC, B2_GP_IO, &DWord); \ DWord |= ((GP_DIR_0 | GP_IO_0) << (Bit));\ SK_OUT32(IoC, B2_GP_IO, DWord); \ } #define SK_CLR_GP_IO(IoC, Bit) { \ SK_U32 DWord; \ SK_IN32(IoC, B2_GP_IO, &DWord); \ DWord &= ~((GP_DIR_0 | GP_IO_0) << (Bit));\ SK_OUT32(IoC, B2_GP_IO, DWord); \ } #define SK_GE_PCI_FIFO_SIZE 1600 /* PCI FIFO Size */ #ifdef __cplusplus } #endif /* __cplusplus */ #endif /* __INC_SKGEHW_H */