/******************************************************************************* Copyright (C) Marvell International Ltd. and its affiliates This software file (the "File") is owned and distributed by Marvell International Ltd. and/or its affiliates ("Marvell") under the following alternative licensing terms. Once you have made an election to distribute the File under one of the following license alternatives, please (i) delete this introductory statement regarding license alternatives, (ii) delete the two license alternatives that you have not elected to use and (iii) preserve the Marvell copyright notice above. ******************************************************************************** Marvell Commercial License Option If you received this File from Marvell and you have entered into a commercial license agreement (a "Commercial License") with Marvell, the File is licensed to you under the terms of the applicable Commercial License. ******************************************************************************** Marvell GPL License Option If you received this File from Marvell, you may opt to use, redistribute and/or modify this File in accordance with the terms and conditions of the General Public License Version 2, June 1991 (the "GPL License"), a copy of which is available along with the File in the license.txt file or by writing to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or on the worldwide web at http://www.gnu.org/licenses/gpl.txt. THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY DISCLAIMED. The GPL License provides additional details about this warranty disclaimer. ******************************************************************************** Marvell BSD License Option If you received this File from Marvell, you may opt to use, redistribute and/or modify this File under the following licensing terms. Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: * Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer. * Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. * Neither the name of Marvell nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. *******************************************************************************/ #include "pex/mvPex.h" #include "ctrlEnv/mvCtrlEnvLib.h" /* defines */ #ifdef MV_DEBUG #define DB(x) x #else #define DB(x) #endif MV_STATUS mvPexHalInit(MV_U32 pexIf, MV_PEX_TYPE pexType) { MV_PEX_MODE pexMode; MV_U32 regVal; MV_U32 status; /* First implement Guideline (GL# PCI Express-2) Wrong Default Value */ /* to Transmitter Output Current (TXAMP) Relevant for: 88F5181-A1/B0/B1 */ /* and 88F5281-B0 and above, 88F5182, 88F5082, 88F5181L, 88F6082/L */ if ((mvCtrlModelGet() != MV_1281_DEV_ID) && (mvCtrlModelGet() != MV_6281_DEV_ID) && (mvCtrlModelGet() != MV_6192_DEV_ID) && (mvCtrlModelGet() != MV_6190_DEV_ID) && (mvCtrlModelGet() != MV_6180_DEV_ID) && (mvCtrlModelGet() != MV_6183_DEV_ID) && (mvCtrlModelGet() != MV_6183L_DEV_ID) && (mvCtrlModelGet() != MV_78100_DEV_ID) && (mvCtrlModelGet() != MV_78200_DEV_ID) && (mvCtrlModelGet() != MV_78XX0_DEV_ID)) { /* Read current value of TXAMP */ MV_REG_WRITE(0x41b00, 0x80820000); /* Write the read command */ regVal = MV_REG_READ(0x41b00); /* Extract the data */ /* Prepare new data for write */ regVal &= ~0x7; /* Clear bits [2:0] */ regVal |= 0x4; /* Set the new value */ regVal &= ~0x80000000; /* Set "write" command */ MV_REG_WRITE(0x41b00, regVal); /* Write the write command */ } else { /* Implement 1.0V termination GL for 88F1281 device only */ /* BIT0 - Common mode feedback */ /* BIT3 - TxBuf, extra drive for 1.0V termination */ if (mvCtrlModelGet() == MV_1281_DEV_ID) { MV_REG_WRITE(0x41b00, 0x80860000); /* Write the read command */ regVal = MV_REG_READ(0x41b00); /* Extract the data */ regVal |= (BIT0 | BIT3); regVal &= ~0x80000000; /* Set "write" command */ MV_REG_WRITE(0x41b00, regVal); /* Write the write command */ MV_REG_WRITE(0x31b00, 0x80860000); /* Write the read command */ regVal = MV_REG_READ(0x31b00); /* Extract the data */ regVal |= (BIT0 | BIT3); regVal &= ~0x80000000; /* Set "write" command */ MV_REG_WRITE(0x31b00, regVal); /* Write the write command */ } } if( mvPexModeGet(pexIf, &pexMode) != MV_OK) { mvOsPrintf("PEX init ERR. mvPexModeGet failed (pexType=%d)\n",pexMode.pexType); return MV_ERROR; } /* Check that required PEX type is the one set in reset time */ if (pexType != pexMode.pexType) { /* No Link. Shut down the Phy */ mvPexPowerDown(pexIf); mvOsPrintf("PEX init ERR. PEX type sampled mismatch (%d,%d)\n",pexType,pexMode.pexType); return MV_ERROR; } if (MV_PEX_ROOT_COMPLEX == pexType) { mvPexLocalBusNumSet(pexIf, PEX_HOST_BUS_NUM(pexIf)); mvPexLocalDevNumSet(pexIf, PEX_HOST_DEV_NUM(pexIf)); /* Local device master Enable */ mvPexMasterEnable(pexIf, MV_TRUE); /* Local device slave Enable */ mvPexSlaveEnable(pexIf, mvPexLocalBusNumGet(pexIf), mvPexLocalDevNumGet(pexIf), MV_TRUE); /* Interrupt disable */ status = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND)); status |= PXSAC_INT_DIS; MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND), status); } /* now wait 500 ms to be sure the link is valid (spec compliant) */ mvOsDelay(500); /* Check if we have link */ if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN) { mvOsPrintf("PEX%d interface detected no Link.\n",pexIf); return MV_NO_SUCH; } if (MV_PEX_WITDH_X1 == pexMode.pexWidth) { mvOsPrintf("PEX%d interface detected Link X1\n",pexIf); } else { mvOsPrintf("PEX%d interface detected Link X4\n",pexIf); } #ifdef VIRTUAL_BRIDGE_SUPPORT mvPexVrtBrgInit(pexIf); #endif return MV_OK; } /******************************************************************************* * mvPexModeGet - Get Pex Mode * * DESCRIPTION: * * INPUT: * pexIf - PEX interface number. * * OUTPUT: * pexMode - Pex mode structure * * RETURN: * MV_OK on success , MV_ERROR otherwise * *******************************************************************************/ MV_U32 mvPexModeGet(MV_U32 pexIf,MV_PEX_MODE *pexMode) { MV_U32 pexData; /* Parameter checking */ if (PEX_DEFAULT_IF != pexIf) { if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexModeGet: ERR. Invalid PEX interface %d\n",pexIf); return MV_ERROR; } } pexData = MV_REG_READ(PEX_CTRL_REG(pexIf)); switch (pexData & PXCR_DEV_TYPE_CTRL_MASK) { case PXCR_DEV_TYPE_CTRL_CMPLX: pexMode->pexType = MV_PEX_ROOT_COMPLEX; break; case PXCR_DEV_TYPE_CTRL_POINT: pexMode->pexType = MV_PEX_END_POINT; break; } /* Check if we have link */ if (MV_REG_READ(PEX_STATUS_REG(pexIf)) & PXSR_DL_DOWN) { pexMode->pexLinkUp = MV_FALSE; /* If there is no link, the auto negotiation data is worthless */ pexMode->pexWidth = MV_PEX_WITDH_INVALID; } else { pexMode->pexLinkUp = MV_TRUE; /* We have link. The link width is now valid */ pexData = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_LINK_CTRL_STAT_REG)); pexMode->pexWidth = ((pexData & PXLCSR_NEG_LNK_WDTH_MASK) >> PXLCSR_NEG_LNK_WDTH_OFFS); } return MV_OK; } /* PEX configuration space read write */ /******************************************************************************* * mvPexConfigRead - Read from configuration space * * DESCRIPTION: * This function performs a 32 bit read from PEX configuration space. * It supports both type 0 and type 1 of Configuration Transactions * (local and over bridge). In order to read from local bus segment, use * bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers * will result configuration transaction of type 1 (over bridge). * * INPUT: * pexIf - PEX interface number. * bus - PEX segment bus number. * dev - PEX device number. * func - Function number. * regOffs - Register offset. * * OUTPUT: * None. * * RETURN: * 32bit register data, 0xffffffff on error * *******************************************************************************/ MV_U32 mvPexConfigRead (MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, MV_U32 regOff) { #if defined(VIRTUAL_BRIDGE_SUPPORT) return mvPexVrtBrgConfigRead (pexIf, bus, dev, func, regOff); #else MV_U32 pexData = 0; MV_U32 localDev,localBus; /* Parameter checking */ if (PEX_DEFAULT_IF != pexIf) { if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexConfigRead: ERR. Invalid PEX interface %d\n",pexIf); return 0xFFFFFFFF; } } if (dev >= MAX_PEX_DEVICES) { mvOsPrintf("mvPexConfigRead: ERR. device number illigal %d\n", dev); return 0xFFFFFFFF; } if (func >= MAX_PEX_FUNCS) { mvOsPrintf("mvPexConfigRead: ERR. function num illigal %d\n", func); return 0xFFFFFFFF; } if (bus >= MAX_PEX_BUSSES) { mvOsPrintf("mvPexConfigRead: ERR. bus number illigal %d\n", bus); return MV_ERROR; } DB(mvOsPrintf("mvPexConfigRead: pexIf %d, bus %d, dev %d, func %d, regOff 0x%x\n", pexIf, bus, dev, func, regOff)); localDev = mvPexLocalDevNumGet(pexIf); localBus = mvPexLocalBusNumGet(pexIf); /* Speed up the process. In case on no link, return MV_ERROR */ if ((dev != localDev) || (bus != localBus)) { pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); if ((pexData & PXSR_DL_DOWN)) { return MV_ERROR; } } /* in PCI Express we have only one device number */ /* and this number is the first number we encounter else that the localDev*/ /* spec pex define return on config read/write on any device */ if (bus == localBus) { if (localDev == 0) { /* if local dev is 0 then the first number we encounter after 0 is 1 */ if ((dev != 1)&&(dev != localDev)) { return MV_ERROR; } } else { /* if local dev is not 0 then the first number we encounter is 0 */ if ((dev != 0)&&(dev != localDev)) { return MV_ERROR; } } if(func != 0 ) /* i.e bridge */ { return MV_ERROR; } } /* Creating PEX address to be passed */ pexData = (bus << PXCAR_BUS_NUM_OFFS); pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); pexData |= (func << PXCAR_FUNC_NUM_OFFS); pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ /* extended register space */ pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); pexData |= PXCAR_CONFIG_EN; /* Write the address to the PEX configuration address register */ MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); DB(mvOsPrintf("mvPexConfigRead:address pexData=%x ",pexData)); /* In order to let the PEX controller absorbed the address of the read */ /* transaction we perform a validity check that the address was written */ if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) { return MV_ERROR; } /* cleaning Master Abort */ MV_REG_BIT_SET(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), PXSAC_MABORT); #if 0 /* Guideline (GL# PCI Express-1) Erroneous Read Data on Configuration */ /* This guideline is relevant for all devices except of the following devices: 88F5281-BO and above, 88F5181L-A0 and above, 88F1281 A0 and above 88F6183 A0 and above, 88F6183L */ if ( ( (dev != localDev) || (bus != localBus) ) && ( !(MV_5281_DEV_ID == mvCtrlModelGet())&& !((MV_5181_DEV_ID == mvCtrlModelGet())&& (mvCtrlRevGet() >= MV_5181L_A0_REV))&& !(MV_1281_DEV_ID == mvCtrlModelGet())&& !(MV_6183_DEV_ID == mvCtrlModelGet())&& !(MV_6183L_DEV_ID == mvCtrlModelGet())&& !(MV_6281_DEV_ID == mvCtrlModelGet())&& !(MV_6192_DEV_ID == mvCtrlModelGet())&& !(MV_6190_DEV_ID == mvCtrlModelGet())&& !(MV_6180_DEV_ID == mvCtrlModelGet())&& !(MV_78XX0_DEV_ID == mvCtrlModelGet()) )) { /* PCI-Express configuration read work-around */ /* we will use one of the Punit (AHBToMbus) windows to access the xbar and read the data from there */ /* Need to configure the 2 free Punit (AHB to MBus bridge) address decoding windows: Configure the flash Window to handle Configuration space requests for PEX0/1: 1. write 0x7931/0x7941 to the flash window and the size, 79-xbar attr (pci cfg), 3/4-xbar target (pex0/1), 1-WinEn 2. write base to flash window Configuration transactions from the CPU should write/read the data to/from address of the form: addr[31:28] = 0x5 (for PEX0) or 0x6 (for PEX1) addr[27:24] = extended register number addr[23:16] = bus number addr[15:11] = device number addr[10:8] = function number addr[7:0] = register number */ #include "ctrlEnv/sys/mvAhbToMbus.h" { MV_U32 winNum; MV_AHB_TO_MBUS_DEC_WIN originWin; MV_U32 pciAddr=0; MV_U32 remapLow=0,remapHigh=0; /* We will use DEV_CS2\Flash window for this workarround */ winNum = mvAhbToMbusWinTargetGet(PEX_CONFIG_RW_WA_TARGET); /* save remap values if exist */ if ((1 == winNum)||(0 == winNum)) { remapLow = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum)); remapHigh = MV_REG_READ(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum)); } /* save the original window values */ mvAhbToMbusWinGet(winNum,&originWin); if (PEX_CONFIG_RW_WA_USE_ORIGINAL_WIN_VALUES) { /* set the window as xbar window */ if (pexIf) { MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), (0x7931 | (((originWin.addrWin.size >> 16)-1) ) << 16)); } else { MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), (0x7941 | (((originWin.addrWin.size >> 16)-1) ) << 16)); } MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), originWin.addrWin.baseLow); /*pciAddr = originWin.addrWin.baseLow;*/ pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR( (MV_U32)originWin.addrWin.baseLow); } else { /* set the window as xbar window */ if (pexIf) { MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), (0x7931 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); } else { MV_REG_WRITE(AHB_TO_MBUS_WIN_CTRL_REG(winNum), (0x7941 | (((PEX_CONFIG_RW_WA_SIZE >> 16)-1) ) << 16)); } MV_REG_WRITE(AHB_TO_MBUS_WIN_BASE_REG(winNum), PEX_CONFIG_RW_WA_BASE); pciAddr = (MV_U32)CPU_MEMIO_UNCACHED_ADDR(PEX_CONFIG_RW_WA_BASE); } /* remap should be as base */ if ((1 == winNum)||(0 == winNum)) { MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),pciAddr); MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),0); } /* extended register space */ pciAddr |= (bus << 16); pciAddr |= (dev << 11); pciAddr |= (func << 8); pciAddr |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ pexData = *(MV_U32*)pciAddr; pexData = MV_32BIT_LE(pexData); /* Data always in LE */ /* restore the original window values */ mvAhbToMbusWinSet(winNum,&originWin); /* restore original remap values*/ if ((1 == winNum)||(0 == winNum)) { MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_LOW_REG(winNum),remapLow); MV_REG_WRITE(AHB_TO_MBUS_WIN_REMAP_HIGH_REG(winNum),remapHigh); } } } else #endif { /* Read the Data returned in the PEX Data register */ pexData = MV_REG_READ(PEX_CFG_DATA_REG(pexIf)); } DB(mvOsPrintf("mvPexConfigRead: got : %x \n",pexData)); return pexData; #endif } /******************************************************************************* * mvPexConfigWrite - Write to configuration space * * DESCRIPTION: * This function performs a 32 bit write to PEX configuration space. * It supports both type 0 and type 1 of Configuration Transactions * (local and over bridge). In order to write to local bus segment, use * bus number retrieved from mvPexLocalBusNumGet(). Other bus numbers * will result configuration transaction of type 1 (over bridge). * * INPUT: * pexIf - PEX interface number. * bus - PEX segment bus number. * dev - PEX device number. * func - Function number. * regOffs - Register offset. * data - 32bit data. * * OUTPUT: * None. * * RETURN: * MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK * *******************************************************************************/ MV_STATUS mvPexConfigWrite(MV_U32 pexIf, MV_U32 bus, MV_U32 dev, MV_U32 func, MV_U32 regOff, MV_U32 data) { #if defined(VIRTUAL_BRIDGE_SUPPORT) return mvPexVrtBrgConfigWrite (pexIf, bus, dev, func, regOff, data); #else MV_U32 pexData = 0; MV_U32 localDev,localBus; /* Parameter checking */ if (PEX_DEFAULT_IF != pexIf) { if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexConfigWrite: ERR. Invalid PEX interface %d\n", pexIf); return MV_ERROR; } } if (dev >= MAX_PEX_DEVICES) { mvOsPrintf("mvPexConfigWrite: ERR. device number illigal %d\n",dev); return MV_BAD_PARAM; } if (func >= MAX_PEX_FUNCS) { mvOsPrintf("mvPexConfigWrite: ERR. function number illigal %d\n", func); return MV_ERROR; } if (bus >= MAX_PEX_BUSSES) { mvOsPrintf("mvPexConfigWrite: ERR. bus number illigal %d\n", bus); return MV_ERROR; } localDev = mvPexLocalDevNumGet(pexIf); localBus = mvPexLocalBusNumGet(pexIf); /* in PCI Express we have only one device number other than ourselves*/ /* and this number is the first number we encounter else than the localDev that can be any valid dev number*/ /* pex spec define return on config read/write on any device */ if (bus == localBus) { if (localDev == 0) { /* if local dev is 0 then the first number we encounter after 0 is 1 */ if ((dev != 1)&&(dev != localDev)) { return MV_ERROR; } } else { /* if local dev is not 0 then the first number we encounter is 0 */ if ((dev != 0)&&(dev != localDev)) { return MV_ERROR; } } } /* if we are not accessing ourselves , then check the link */ if ((dev != localDev) || (bus != localBus) ) { /* workarround */ /* when no link return MV_ERROR */ pexData = MV_REG_READ(PEX_STATUS_REG(pexIf)); if ((pexData & PXSR_DL_DOWN)) { return MV_ERROR; } } pexData =0; /* Creating PEX address to be passed */ pexData |= (bus << PXCAR_BUS_NUM_OFFS); pexData |= (dev << PXCAR_DEVICE_NUM_OFFS); pexData |= (func << PXCAR_FUNC_NUM_OFFS); pexData |= (regOff & PXCAR_REG_NUM_MASK); /* lgacy register space */ /* extended register space */ pexData |=(((regOff & PXCAR_REAL_EXT_REG_NUM_MASK) >> PXCAR_REAL_EXT_REG_NUM_OFFS) << PXCAR_EXT_REG_NUM_OFFS); pexData |= PXCAR_CONFIG_EN; DB(mvOsPrintf("mvPexConfigWrite: If=%x bus=%x func=%x dev=%x regOff=%x data=%x \n", pexIf,bus,func,dev,regOff,data,pexData) ); /* Write the address to the PEX configuration address register */ MV_REG_WRITE(PEX_CFG_ADDR_REG(pexIf), pexData); /* Clear CPU pipe. Important where CPU can perform OOO execution */ CPU_PIPE_FLUSH; /* In order to let the PEX controller absorbed the address of the read */ /* transaction we perform a validity check that the address was written */ if(pexData != MV_REG_READ(PEX_CFG_ADDR_REG(pexIf))) { return MV_ERROR; } /* Write the Data passed to the PEX Data register */ MV_REG_WRITE(PEX_CFG_DATA_REG(pexIf), data); return MV_OK; #endif } /******************************************************************************* * mvPexMasterEnable - Enable/disale PEX interface master transactions. * * DESCRIPTION: * This function performs read modified write to PEX command status * (offset 0x4) to set/reset bit 2. After this bit is set, the PEX * master is allowed to gain ownership on the bus, otherwise it is * incapable to do so. * * INPUT: * pexIf - PEX interface number. * enable - Enable/disable parameter. * * OUTPUT: * None. * * RETURN: * MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK * *******************************************************************************/ MV_STATUS mvPexMasterEnable(MV_U32 pexIf, MV_BOOL enable) { MV_U32 pexCommandStatus; MV_U32 localBus; MV_U32 localDev; /* Parameter checking */ if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexMasterEnable: ERR. Invalid PEX interface %d\n", pexIf); return MV_ERROR; } localBus = mvPexLocalBusNumGet(pexIf); localDev = mvPexLocalDevNumGet(pexIf); pexCommandStatus = MV_REG_READ(PEX_CFG_DIRECT_ACCESS(pexIf, PEX_STATUS_AND_COMMAND)); if (MV_TRUE == enable) { pexCommandStatus |= PXSAC_MASTER_EN; } else { pexCommandStatus &= ~PXSAC_MASTER_EN; } MV_REG_WRITE(PEX_CFG_DIRECT_ACCESS(pexIf,PEX_STATUS_AND_COMMAND), pexCommandStatus); return MV_OK; } /******************************************************************************* * mvPexSlaveEnable - Enable/disale PEX interface slave transactions. * * DESCRIPTION: * This function performs read modified write to PEX command status * (offset 0x4) to set/reset bit 0 and 1. After those bits are set, * the PEX slave is allowed to respond to PEX IO space access (bit 0) * and PEX memory space access (bit 1). * * INPUT: * pexIf - PEX interface number. * dev - PEX device number. * enable - Enable/disable parameter. * * OUTPUT: * None. * * RETURN: * MV_BAD_PARAM for bad parameters ,MV_ERROR on error ! otherwise MV_OK * *******************************************************************************/ MV_STATUS mvPexSlaveEnable(MV_U32 pexIf, MV_U32 bus,MV_U32 dev, MV_BOOL enable) { MV_U32 pexCommandStatus; MV_U32 RegOffs; /* Parameter checking */ if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexSlaveEnable: ERR. Invalid PEX interface %d\n", pexIf); return MV_BAD_PARAM; } if (dev >= MAX_PEX_DEVICES) { mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", dev); return MV_BAD_PARAM; } RegOffs = PEX_STATUS_AND_COMMAND; pexCommandStatus = mvPexConfigRead(pexIf, bus, dev, 0, RegOffs); if (MV_TRUE == enable) { pexCommandStatus |= (PXSAC_IO_EN | PXSAC_MEM_EN); } else { pexCommandStatus &= ~(PXSAC_IO_EN | PXSAC_MEM_EN); } mvPexConfigWrite(pexIf, bus, dev, 0, RegOffs, pexCommandStatus); return MV_OK; } /******************************************************************************* * mvPexLocalBusNumSet - Set PEX interface local bus number. * * DESCRIPTION: * This function sets given PEX interface its local bus number. * Note: In case the PEX interface is PEX-X, the information is read-only. * * INPUT: * pexIf - PEX interface number. * busNum - Bus number. * * OUTPUT: * None. * * RETURN: * MV_NOT_ALLOWED in case PEX interface is PEX-X. * MV_BAD_PARAM on bad parameters , * otherwise MV_OK * *******************************************************************************/ MV_STATUS mvPexLocalBusNumSet(MV_U32 pexIf, MV_U32 busNum) { MV_U32 pexStatus; MV_U32 localBus; MV_U32 localDev; /* Parameter checking */ if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexLocalBusNumSet: ERR. Invalid PEX interface %d\n",pexIf); return MV_BAD_PARAM; } if (busNum >= MAX_PEX_BUSSES) { mvOsPrintf("mvPexLocalBusNumSet: ERR. bus number illigal %d\n", busNum); return MV_ERROR; } localBus = mvPexLocalBusNumGet(pexIf); localDev = mvPexLocalDevNumGet(pexIf); pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); pexStatus &= ~PXSR_PEX_BUS_NUM_MASK; pexStatus |= (busNum << PXSR_PEX_BUS_NUM_OFFS) & PXSR_PEX_BUS_NUM_MASK; MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); return MV_OK; } /******************************************************************************* * mvPexLocalBusNumGet - Get PEX interface local bus number. * * DESCRIPTION: * This function gets the local bus number of a given PEX interface. * * INPUT: * pexIf - PEX interface number. * * OUTPUT: * None. * * RETURN: * Local bus number.0xffffffff on Error * *******************************************************************************/ MV_U32 mvPexLocalBusNumGet(MV_U32 pexIf) { MV_U32 pexStatus; /* Parameter checking */ if (PEX_DEFAULT_IF != pexIf) { if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexLocalBusNumGet: ERR. Invalid PEX interface %d\n",pexIf); return 0xFFFFFFFF; } } pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); pexStatus &= PXSR_PEX_BUS_NUM_MASK; return (pexStatus >> PXSR_PEX_BUS_NUM_OFFS); } /******************************************************************************* * mvPexLocalDevNumSet - Set PEX interface local device number. * * DESCRIPTION: * This function sets given PEX interface its local device number. * Note: In case the PEX interface is PEX-X, the information is read-only. * * INPUT: * pexIf - PEX interface number. * devNum - Device number. * * OUTPUT: * None. * * RETURN: * MV_NOT_ALLOWED in case PEX interface is PEX-X. * MV_BAD_PARAM on bad parameters , * otherwise MV_OK * *******************************************************************************/ MV_STATUS mvPexLocalDevNumSet(MV_U32 pexIf, MV_U32 devNum) { MV_U32 pexStatus; MV_U32 localBus; MV_U32 localDev; /* Parameter checking */ if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexLocalDevNumSet: ERR. Invalid PEX interface %d\n",pexIf); return MV_BAD_PARAM; } if (devNum >= MAX_PEX_DEVICES) { mvOsPrintf("mvPexLocalDevNumSet: ERR. device number illigal %d\n", devNum); return MV_BAD_PARAM; } localBus = mvPexLocalBusNumGet(pexIf); localDev = mvPexLocalDevNumGet(pexIf); pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); pexStatus &= ~PXSR_PEX_DEV_NUM_MASK; pexStatus |= (devNum << PXSR_PEX_DEV_NUM_OFFS) & PXSR_PEX_DEV_NUM_MASK; MV_REG_WRITE(PEX_STATUS_REG(pexIf), pexStatus); return MV_OK; } /******************************************************************************* * mvPexLocalDevNumGet - Get PEX interface local device number. * * DESCRIPTION: * This function gets the local device number of a given PEX interface. * * INPUT: * pexIf - PEX interface number. * * OUTPUT: * None. * * RETURN: * Local device number. 0xffffffff on Error * *******************************************************************************/ MV_U32 mvPexLocalDevNumGet(MV_U32 pexIf) { MV_U32 pexStatus; /* Parameter checking */ if (PEX_DEFAULT_IF != pexIf) { if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexLocalDevNumGet: ERR. Invalid PEX interface %d\n", pexIf); return 0xFFFFFFFF; } } pexStatus = MV_REG_READ(PEX_STATUS_REG(pexIf)); pexStatus &= PXSR_PEX_DEV_NUM_MASK; return (pexStatus >> PXSR_PEX_DEV_NUM_OFFS); } MV_VOID mvPexPhyRegRead(MV_U32 pexIf, MV_U32 regOffset, MV_U16 *value) { MV_U32 regAddr; if (pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexPhyRegRead: ERR. Invalid PEX interface %d\n", pexIf); return; } regAddr = (BIT31 | ((regOffset & 0x3fff) << 16)); MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); *value = MV_REG_READ(PEX_PHY_ACCESS_REG(pexIf)); } MV_VOID mvPexPhyRegWrite(MV_U32 pexIf, MV_U32 regOffset, MV_U16 value) { MV_U32 regAddr; if(pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexPhyRegWrite: ERR. Invalid PEX interface %d\n", pexIf); return; } regAddr = (((regOffset & 0x3fff) << 16) | value); MV_REG_WRITE(PEX_PHY_ACCESS_REG(pexIf), regAddr); } /******************************************************************************* * mvPexForceX1 * * DESCRIPTION: * shut down lanes 1-3 if recognize that attached to an x1 end-point * INPUT: * pexIf - PEX interface number. * * OUTPUT: * None * * RETURN: * MV_OK on success , MV_ERROR otherwise * *******************************************************************************/ MV_U32 mvPexForceX1(MV_U32 pexIf) { MV_U32 regData = 0; if(pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexForceX1: ERR. Invalid PEX interface %d\n", pexIf); return MV_BAD_PARAM; } regData = MV_REG_READ(PEX_CTRL_REG(pexIf)) & ~(PXCR_CONF_LINK_MASK) ; regData |= PXCR_CONF_LINK_X1; MV_REG_WRITE(PEX_CTRL_REG(pexIf), regData); return MV_OK; } MV_BOOL mvPexIsPowerUp(MV_U32 pexIf) { if(pexIf >= mvCtrlPexMaxIfGet()) { mvOsPrintf("mvPexIsPowerUp: ERR. Invalid PEX interface %d\n", pexIf); return MV_FALSE; } return mvCtrlPwrClckGet(PEX_UNIT_ID, pexIf); } MV_VOID mvPexPowerDown(MV_U32 pexIf) { if ( (mvCtrlModelGet() == MV_78XX0_DEV_ID) || (mvCtrlModelGet() == MV_78100_DEV_ID) || (mvCtrlModelGet() == MV_78200_DEV_ID) ) { mvCtrlPwrClckSet(PEX_UNIT_ID, pexIf, MV_FALSE); } else { MV_REG_WRITE((0x41B00 -(pexIf)*0x10000), 0x20800087); } }