/****************************************************************************** * * Name: skgetwsi.h * Project: Gigabit Ethernet Adapters, TWSI-Module * Version: $Revision: 1.1.1.1 $ * Date: $Date: 2008-12-15 11:39:21 $ * Purpose: Special defines for TWSI * ******************************************************************************/ /****************************************************************************** * * LICENSE: * (C)Copyright 1998-2002 SysKonnect. * (C)Copyright 2002-2004 Marvell. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * The information in this file is provided "AS IS" without warranty. * /LICENSE * ******************************************************************************/ /* * SKGETWSI.H contains all SK-98xx specific defines for the TWSI handling */ #ifndef _INC_SKGETWSI_H_ #define _INC_SKGETWSI_H_ /* * Macros to access the B2_I2C_CTRL */ #define SK_I2C_CTL(IoC, flag, dev, dev_size, reg, burst) \ SK_OUT32(IoC, B2_I2C_CTRL,\ (flag ? 0x80000000UL : 0x0L) | \ (((SK_U32)reg << 16) & I2C_ADDR) | \ (((SK_U32)dev << 9) & I2C_DEV_SEL) | \ (dev_size & I2C_DEV_SIZE) | \ ((burst << 4) & I2C_BURST_LEN)) #define SK_I2C_STOP(IoC) { \ SK_U32 I2cCtrl; \ SK_IN32(IoC, B2_I2C_CTRL, &I2cCtrl); \ SK_OUT32(IoC, B2_I2C_CTRL, I2cCtrl | I2C_STOP); \ } #define SK_I2C_GET_CTL(IoC, pI2cCtrl) SK_IN32(IoC, B2_I2C_CTRL, pI2cCtrl) /* * Macros to access the TWSI SW Registers */ #define SK_I2C_SET_BIT(IoC, SetBits) { \ SK_U8 OrgBits; \ SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ SK_OUT8(IoC, B2_I2C_SW, OrgBits | (SK_U8)(SetBits)); \ } #define SK_I2C_CLR_BIT(IoC, ClrBits) { \ SK_U8 OrgBits; \ SK_IN8(IoC, B2_I2C_SW, &OrgBits); \ SK_OUT8(IoC, B2_I2C_SW, OrgBits & ~((SK_U8)(ClrBits))); \ } #define SK_I2C_GET_SW(IoC, pI2cSw) SK_IN8(IoC, B2_I2C_SW, pI2cSw) /* * define the possible sensor states */ #define SK_SEN_IDLE 0 /* Idle: sensor not read */ #define SK_SEN_VALUE 1 /* Value Read cycle */ #define SK_SEN_VALEXT 2 /* Extended Value Read cycle */ /* * Conversion factor to convert read Voltage sensor to milli Volt * Conversion factor to convert read Temperature sensor to 10th degree Celsius */ #define SK_LM80_VT_LSB 22 /* 22mV LSB resolution */ #define SK_LM80_TEMP_LSB 10 /* 1 degree LSB resolution */ #define SK_LM80_TEMPEXT_LSB 5 /* 0.5 degree LSB resolution for ext. val. */ /* * formula: counter = (22500*60)/(rpm * divisor * pulses/2) * assuming: 6500rpm, 4 pulses, divisor 1 */ #define SK_LM80_FAN_FAKTOR ((22500L*60)/(1*2)) /* * Define sensor management data * Maximum is reached on Genesis copper dual port and Yukon-64 * Board specific maximum is in pAC->I2c.MaxSens */ #define SK_MAX_SENSORS 8 /* maximal no. of installed sensors */ #define SK_MIN_SENSORS 5 /* minimal no. of installed sensors */ /* * To watch the state machine (SM) use the timer in two ways * instead of one as hitherto */ #define SK_TIMER_WATCH_SM 0 /* Watch the SM to finish in a spec. time */ #define SK_TIMER_NEW_GAUGING 1 /* Start a new gauging when timer expires */ /* * Defines for the individual thresholds */ #define C_PLUS_20 120 / 100 #define C_PLUS_15 115 / 100 #define C_PLUS_10 110 / 100 #define C_PLUS_5 105 / 100 #define C_MINUS_5 95 / 100 #define C_MINUS_10 90 / 100 #define C_MINUS_15 85 / 100 /* Temperature sensor */ #define SK_SEN_TEMP_HIGH_ERR 800 /* Temperature High Err Threshold */ #define SK_SEN_TEMP_HIGH_WARN 700 /* Temperature High Warn Threshold */ #define SK_SEN_TEMP_LOW_WARN 100 /* Temperature Low Warn Threshold */ #define SK_SEN_TEMP_LOW_ERR 0 /* Temperature Low Err Threshold */ /* VCC which should be 5 V */ #define SK_SEN_PCI_5V_HIGH_ERR 5588 /* Voltage PCI High Err Threshold */ #define SK_SEN_PCI_5V_HIGH_WARN 5346 /* Voltage PCI High Warn Threshold */ #define SK_SEN_PCI_5V_LOW_WARN 4664 /* Voltage PCI Low Warn Threshold */ #define SK_SEN_PCI_5V_LOW_ERR 4422 /* Voltage PCI Low Err Threshold */ /* * VIO may be 5 V or 3.3 V. Initialization takes two parts: * 1. Initialize lowest lower limit and highest higher limit. * 2. After the first value is read correct the upper or the lower limit to * the appropriate C constant. * * Warning limits are +-5% of the exepected voltage. * Error limits are +-10% of the expected voltage. */ /* Bug fix AF: 16.Aug.2001: Correct the init base of LM80 sensor */ #define SK_SEN_PCI_IO_5V_HIGH_ERR 5566 /* + 10% V PCI-IO High Err Threshold */ #define SK_SEN_PCI_IO_5V_HIGH_WARN 5324 /* + 5% V PCI-IO High Warn Threshold */ /* 5000 mVolt */ #define SK_SEN_PCI_IO_5V_LOW_WARN 4686 /* - 5% V PCI-IO Low Warn Threshold */ #define SK_SEN_PCI_IO_5V_LOW_ERR 4444 /* - 10% V PCI-IO Low Err Threshold */ #define SK_SEN_PCI_IO_RANGE_LIMITER 4000 /* 4000 mV range delimiter */ /* correction values for the second pass */ #define SK_SEN_PCI_IO_3V3_HIGH_ERR 3850 /* + 15% V PCI-IO High Err Threshold */ #define SK_SEN_PCI_IO_3V3_HIGH_WARN 3674 /* + 10% V PCI-IO High Warn Threshold */ /* 3300 mVolt */ #define SK_SEN_PCI_IO_3V3_LOW_WARN 2926 /* - 10% V PCI-IO Low Warn Threshold */ #define SK_SEN_PCI_IO_3V3_LOW_ERR 2772 /* - 15% V PCI-IO Low Err Threshold */ /* * VDD voltage */ #define SK_SEN_VDD_HIGH_ERR 3630 /* Voltage ASIC High Err Threshold */ #define SK_SEN_VDD_HIGH_WARN 3476 /* Voltage ASIC High Warn Threshold */ #define SK_SEN_VDD_LOW_WARN 3146 /* Voltage ASIC Low Warn Threshold */ #define SK_SEN_VDD_LOW_ERR 2970 /* Voltage ASIC Low Err Threshold */ /* * PHY PLL 3V3 voltage */ #define SK_SEN_PLL_3V3_HIGH_ERR 3630 /* Voltage PMA High Err Threshold */ #define SK_SEN_PLL_3V3_HIGH_WARN 3476 /* Voltage PMA High Warn Threshold */ #define SK_SEN_PLL_3V3_LOW_WARN 3146 /* Voltage PMA Low Warn Threshold */ #define SK_SEN_PLL_3V3_LOW_ERR 2970 /* Voltage PMA Low Err Threshold */ /* * VAUX (YUKON only) */ #define SK_SEN_VAUX_3V3_VAL 3300 /* Voltage VAUX 3.3 Volt */ #define SK_SEN_VAUX_3V3_HIGH_ERR (SK_I32)(SK_SEN_VAUX_3V3_VAL * C_PLUS_10) #define SK_SEN_VAUX_3V3_HIGH_WARN (SK_I32)(SK_SEN_VAUX_3V3_VAL * C_PLUS_5) #define SK_SEN_VAUX_3V3_LOW_WARN (SK_I32)(SK_SEN_VAUX_3V3_VAL * C_MINUS_5) #define SK_SEN_VAUX_3V3_LOW_ERR (SK_I32)(SK_SEN_VAUX_3V3_VAL * C_MINUS_10) #define SK_SEN_VAUX_RANGE_LIMITER 1000 /* 1000 mV range delimiter */ /* * PHY 2V5 voltage */ #define SK_SEN_PHY_2V5_VAL 2500 /* Voltage PHY 2.5 Volt */ #define SK_SEN_PHY_2V5_HIGH_ERR (SK_I32)(SK_SEN_PHY_2V5_VAL * C_PLUS_10) #define SK_SEN_PHY_2V5_HIGH_WARN (SK_I32)(SK_SEN_PHY_2V5_VAL * C_PLUS_5) #define SK_SEN_PHY_2V5_LOW_WARN (SK_I32)(SK_SEN_PHY_2V5_VAL * C_MINUS_5) #define SK_SEN_PHY_2V5_LOW_ERR (SK_I32)(SK_SEN_PHY_2V5_VAL * C_MINUS_10) /* * ASIC Core 1V5 voltage (YUKON only) */ #define SK_SEN_CORE_1V5_VAL 1500 /* Voltage ASIC Core 1.5 Volt */ #define SK_SEN_CORE_1V5_HIGH_ERR (SK_I32)(SK_SEN_CORE_1V5_VAL * C_PLUS_10) #define SK_SEN_CORE_1V5_HIGH_WARN (SK_I32)(SK_SEN_CORE_1V5_VAL * C_PLUS_5) #define SK_SEN_CORE_1V5_LOW_WARN (SK_I32)(SK_SEN_CORE_1V5_VAL * C_MINUS_5) #define SK_SEN_CORE_1V5_LOW_ERR (SK_I32)(SK_SEN_CORE_1V5_VAL * C_MINUS_10) /* * ASIC Core 1V2 (1V3) voltage (YUKON-2 only) */ #define SK_SEN_CORE_1V2_VAL 1200 /* Voltage ASIC Core 1.2 Volt */ #define SK_SEN_CORE_1V2_HIGH_ERR (SK_I32)(SK_SEN_CORE_1V2_VAL * C_PLUS_20) #define SK_SEN_CORE_1V2_HIGH_WARN (SK_I32)(SK_SEN_CORE_1V2_VAL * C_PLUS_15) #define SK_SEN_CORE_1V2_LOW_WARN (SK_I32)(SK_SEN_CORE_1V2_VAL * C_MINUS_5) #define SK_SEN_CORE_1V2_LOW_ERR (SK_I32)(SK_SEN_CORE_1V2_VAL * C_MINUS_10) #define SK_SEN_CORE_1V3_VAL 1300 /* Voltage ASIC Core 1.3 Volt */ #define SK_SEN_CORE_1V3_HIGH_ERR (SK_I32)(SK_SEN_CORE_1V3_VAL * C_PLUS_15) #define SK_SEN_CORE_1V3_HIGH_WARN (SK_I32)(SK_SEN_CORE_1V3_VAL * C_PLUS_10) #define SK_SEN_CORE_1V3_LOW_WARN (SK_I32)(SK_SEN_CORE_1V3_VAL * C_MINUS_5) #define SK_SEN_CORE_1V3_LOW_ERR (SK_I32)(SK_SEN_CORE_1V3_VAL * C_MINUS_10) /* * FAN 1 speed */ /* assuming: 6500rpm +-15%, 4 pulses, * warning at: 80 % * error at: 70 % * no upper limit */ #define SK_SEN_FAN_HIGH_ERR 20000 /* FAN Speed High Err Threshold */ #define SK_SEN_FAN_HIGH_WARN 20000 /* FAN Speed High Warn Threshold */ #define SK_SEN_FAN_LOW_WARN 5200 /* FAN Speed Low Warn Threshold */ #define SK_SEN_FAN_LOW_ERR 4550 /* FAN Speed Low Err Threshold */ /* * Some Voltages need dynamic thresholds */ #define SK_SEN_DYN_INIT_NONE 0 /* No dynamic init of thresholds */ #define SK_SEN_DYN_INIT_PCI_IO 10 /* Init PCI-IO with new thresholds */ #define SK_SEN_DYN_INIT_VAUX 11 /* Init VAUX with new thresholds */ extern int SkLm80ReadSensor(SK_AC *pAC, SK_IOC IoC, SK_SENSOR *pSen); #endif /* n_INC_SKGETWSI_H */