Working version

This commit is contained in:
Olaf Rempel 2019-08-11 11:12:23 +02:00
parent 5e460cb33f
commit dd1cdcbeb9
2 changed files with 349 additions and 110 deletions

View File

@ -11,8 +11,8 @@ MCU=attiny2313
AVRDUDE_MCU=attiny2313 AVRDUDE_MCU=attiny2313
AVRDUDE_FUSES=lfuse:w:0xff:m hfuse:w:0xdb:m efuse:w:0xff:m AVRDUDE_FUSES=lfuse:w:0xff:m hfuse:w:0xdb:m efuse:w:0xff:m
#AVRDUDE_PROG := -c avr910 -b 115200 -P /dev/ispprog AVRDUDE_PROG := -c avr910 -b 115200 -P /dev/ispprog
AVRDUDE_PROG := -c dragon_isp -P usb #AVRDUDE_PROG := -c dragon_isp -P usb
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------

455
main.c
View File

@ -65,11 +65,62 @@
#define UART_CALC_BAUDRATE(baudRate) (((uint32_t)F_CPU) / (((uint32_t)baudRate)*16) -1) #define UART_CALC_BAUDRATE(baudRate) (((uint32_t)F_CPU) / (((uint32_t)baudRate)*16) -1)
/* ************************************************************************* */
#define MSGTYPE_VERSION_REQ 0x01 /* no payload */
#define MSGTYPE_PAGESIZE_REQ 0x02 /* no payload */
#define MSGTYPE_CONFIG_REQ 0x03 /* eprom_type(1), pagesize(1), reset_polarity(1) */
#define MSGTYPE_PROGMODE_REQ 0x04 /* progmode(1) */
#define MSGTYPE_SETADDRESS_REQ 0x05 /* address(3) msb first */
#define MSGTYPE_WRITE_REQ 0x06 /* data(0-pagesize) */
#define MSGTYPE_READ_REQ 0x07 /* length(1) */
#define MSGTYPE_ERROR_RSP 0x80 /* error_code(1) */
#define MSGTYPE_VERSION_RSP 0x81 /* version(?) */
#define MSGTYPE_PAGESIZE_RSP 0x82 /* pagesize(1) */
#define MSGTYPE_CONFIG_RSP 0x83 /* no payload */
#define MSGTYPE_PROGMODE_RSP 0x84 /* no payload */
#define MSGTYPE_SETADDRESS_RSP 0x85 /* no payload */
#define MSGTYPE_WRITE_RSP 0x86 /* no payload */
#define MSGTYPE_READ_RSP 0x87 /* data(0-pagesize) */
#define SUCCESS 0x00
#define ERROR_UNKNOWN_COMMAND 0x01 /* unknown message type */
#define ERROR_NOT_SUPPORTED 0x02 /* command not supported */
#define ERROR_INVALID_MODE 0x03 /* invalid progmode */
#define ERROR_INVALID_PARAMETER 0x04 /* invalid parameter in request */
#define ERROR_INVALID_ADDRESS 0x05 /* write outside of configured region */
#define RESET_POLARITY_LOW 0x00 /* low active reset */
#define RESET_POLARITY_HIGH 0x01 /* high active reset */
#define EPROM_TYPE_2K 0x02 /* 2716 */
#define EPROM_TYPE_4K 0x04 /* 2732 */
#define EPROM_TYPE_8K 0x08 /* 2764 */
#define EPROM_TYPE_16K 0x10 /* 27128 */
#define EPROM_TYPE_32K 0x20 /* 27256 */
#define EPROM_TYPE_64K 0x40 /* 27512 */
#define EPROM_TYPE_128K 0x80 /* 27010 */
#define PROGMODE_DISABLED 0x00 /* target running, no write access to RAM */
#define PROGMODE_ENABLED 0x01 /* target reset, write access to RAM */
#define PAGESIZE_MAX 128
/* ************************************************************************* */
struct _globdata { struct _globdata {
uint8_t address_mask; uint32_t address_max;
uint32_t address;
uint8_t progmode;
uint8_t reset_polarity; uint8_t reset_polarity;
uint8_t pagesize;
uint8_t address_mask;
}; };
static const uint8_t version_str[] = "epromsim v1.00";
static struct _globdata gdata = { 0 }; static struct _globdata gdata = { 0 };
@ -100,10 +151,14 @@ static void shift_data(uint8_t data)
{ {
uint8_t mask; uint8_t mask;
for (mask = 0x01; mask != 0; mask <<= 1) { for (mask = 0x01; mask != 0; mask <<= 1)
if (data & mask) { {
if (data & mask)
{
PORTB |= (1<<SREG_DAT); PORTB |= (1<<SREG_DAT);
} else { }
else
{
PORTB &= ~(1<<SREG_DAT); PORTB &= ~(1<<SREG_DAT);
} }
@ -126,32 +181,69 @@ static void store_pulse(void)
/* ************************************************************************* /* *************************************************************************
* write pulse for SRAM and increment counter * write pulse for SRAM
* ************************************************************************* */ * ************************************************************************* */
static void write_inc_pulse(void) static void write_pulse(void)
{ {
/* positive edge clocks in data */ /* positive edge clocks in data */
PORTB &= ~(1<<nRAM_WR); PORTB &= ~(1<<nRAM_WR);
PORTB |= (1<<nRAM_WR); PORTB |= (1<<nRAM_WR);
} /* write_pulse */
/* *************************************************************************
* reset address counter
* ************************************************************************* */
static void address_reset(void)
{
PORTD &= ~(1<<nTARGET_EN);
PORTD |= (1<<nTARGET_EN);
} /* address_reset */
/* *************************************************************************
* increment address counter
* ************************************************************************* */
static void address_inc_pulse(void)
{
/* positive edge increments counter */ /* positive edge increments counter */
PORTB |= (1<<CNT_CLK); PORTB |= (1<<CNT_CLK);
PORTB &= ~(1<<CNT_CLK); PORTB &= ~(1<<CNT_CLK);
} /* write_inc_pulse */ } /* address_inc_pulse */
/* *************************************************************************
* controls A16 line
* ************************************************************************* */
static void address_set_a16(uint8_t enable)
{
if (enable)
{
PORTD |= (1<<EMU_A16);
}
else
{
PORTD &= ~(1<<EMU_A16);
}
} /* address_set_a16 */
/* ************************************************************************* /* *************************************************************************
* switch access to RAM between emulator and target * switch access to RAM between emulator and target
* ************************************************************************* */ * ************************************************************************* */
static void do_reset(uint8_t enable) static void set_progmode(uint8_t progmode)
{ {
if (enable) { gdata.progmode = progmode;
if (progmode)
{
/* switch RAM access to EMU */ /* switch RAM access to EMU */
PORTD |= (1<<nTARGET_EN); PORTD |= (1<<nTARGET_EN);
PORTD &= ~(1<<nLED_RT); PORTD &= ~(1<<nLED_RT);
PORTB &= ~(1<<nEMU_EN); PORTB &= ~(1<<nEMU_EN);
}
} else { else
{
/* set eprom address line mask */ /* set eprom address line mask */
shift_data(gdata.address_mask); shift_data(gdata.address_mask);
shift_data(0x00); shift_data(0x00);
@ -161,109 +253,136 @@ static void do_reset(uint8_t enable)
PORTB |= (1<<nEMU_EN); PORTB |= (1<<nEMU_EN);
PORTD &= ~(1<<nTARGET_EN); PORTD &= ~(1<<nTARGET_EN);
PORTD |= (1<<nLED_RT); PORTD |= (1<<nLED_RT);
/* address counter is reset */
gdata.address = 0x00;
} }
/* set RESET_OUT */ /* set RESET_OUT */
if (enable ^ gdata.reset_polarity) { if (progmode ^ gdata.reset_polarity)
{
PORTB &= ~(1<<RESET_OUT); PORTB &= ~(1<<RESET_OUT);
} else { }
else
{
PORTB |= (1<<RESET_OUT); PORTB |= (1<<RESET_OUT);
} }
} /* do_reset */ } /* set_progmode */
/* ************************************************************************* /* *************************************************************************
* configures number of addresslines and loads data from UART into RAM * set_address
* ************************************************************************* */ * ************************************************************************* */
static void do_load(uint8_t type, uint32_t length) static void set_address(uint32_t address)
{ {
uint32_t size; /* reset address counter */
switch (type) { if (address < gdata.address)
case 0x02: /* 2716 - 2kB */ {
size = 0x0800; address_reset();
gdata.address_mask = 0x00; gdata.address = 0;
break;
case 0x04: /* 2732 - 4kB */
size = 0x1000;
gdata.address_mask = 0x80;
break;
case 0x08: /* 2764 - 8kB */
size = 0x2000;
gdata.address_mask = 0xC0;
break;
case 0x10: /* 27128 - 16kB */
size = 0x4000;
gdata.address_mask = 0xE0;
break;
case 0x20: /* 27256 - 32kB */
size = 0x8000;
gdata.address_mask = 0xF0;
break;
case 0x40: /* 27512 - 64kB */
size = 0x10000;
gdata.address_mask = 0xF8;
break;
default:
case 0x80: /* 27010 - 128kB */
size = 0x20000;
gdata.address_mask = 0xFC;
break;
} }
do_reset(1); // TODO: A16 is not controlled by counter
uint32_t i; while (gdata.address++ < address)
uint8_t data; {
for (i = 0; i < size; i++) { address_inc_pulse();
if (i > 0xFFFF) {
PORTD |= (1<<EMU_A16);
} else {
PORTD &= ~(1<<EMU_A16);
} }
} /* set_address */
data = (i < length) ? ser_recv() : 0xFF;
shift_data(data);
store_pulse();
write_inc_pulse();
}
do_reset(0);
} /* do_load */
/* ************************************************************************* /* *************************************************************************
* clears whole RAM (writes 0xFF) * write_data
* ************************************************************************* */
static void write_data(uint8_t length)
{
while (length--)
{
address_set_a16(gdata.address++ > 0xFFFF);
shift_data(ser_recv());
store_pulse();
write_pulse();
address_inc_pulse();
}
} /* write_data */
/* *************************************************************************
* fill RAM with 0xFF
* ************************************************************************* */ * ************************************************************************* */
static void do_clear(void) static void do_clear(void)
{ {
do_reset(1); uint16_t i = 0xFFFF;
shift_data(0xFF); shift_data(0xFF);
uint16_t i = 0xFFFF;
PORTD &= ~(1<<EMU_A16); PORTD &= ~(1<<EMU_A16);
do { do {
store_pulse(); store_pulse();
write_inc_pulse(); write_pulse();
address_inc_pulse();
} while (i--); } while (i--);
PORTD |= (1<<EMU_A16); PORTD |= (1<<EMU_A16);
do { do {
store_pulse(); store_pulse();
write_inc_pulse(); write_pulse();
address_inc_pulse();
} while (i--); } while (i--);
do_reset(0);
} /* do_clear */ } /* do_clear */
/* *************************************************************************
* configures number of addresslines
* ************************************************************************* */
static uint8_t set_eprom_type(uint8_t type)
{
switch (type)
{
case EPROM_TYPE_2K:
gdata.address_max = 0x0800;
gdata.address_mask = 0x00;
break;
case EPROM_TYPE_4K:
gdata.address_max = 0x1000;
gdata.address_mask = 0x80;
break;
case EPROM_TYPE_8K:
gdata.address_max = 0x2000;
gdata.address_mask = 0xC0;
break;
case EPROM_TYPE_16K:
gdata.address_max = 0x4000;
gdata.address_mask = 0xE0;
break;
case EPROM_TYPE_32K:
gdata.address_max = 0x8000;
gdata.address_mask = 0xF0;
break;
case EPROM_TYPE_64K:
gdata.address_max = 0x10000;
gdata.address_mask = 0xF8;
break;
case EPROM_TYPE_128K:
gdata.address_max = 0x20000;
gdata.address_mask = 0xFC;
break;
default:
return ERROR_INVALID_PARAMETER;
}
return SUCCESS;
} /* set_eprom_type */
#if 0 #if 0
/* Powerfail / Wakeup */ /* Powerfail / Wakeup */
ISR(INT0_vect) ISR(INT0_vect)
@ -325,44 +444,164 @@ int main(void)
PORTD &= ~((1<<nLED_GN) | (1<<nTARGET_EN)); PORTD &= ~((1<<nLED_GN) | (1<<nTARGET_EN));
/* init RAM */ /* init RAM */
gdata.address_mask = 0x3F; set_eprom_type(EPROM_TYPE_128K);
set_progmode(PROGMODE_ENABLED);
do_clear(); do_clear();
set_progmode(PROGMODE_DISABLED);
while (1) { while (1)
uint8_t cmd = ser_recv();
switch (cmd) {
case 'p': /* low active reset */
gdata.reset_polarity = 0;
ser_send('\n');
break;
case 'P': /* high active reset */
gdata.reset_polarity = 1;
ser_send('\n');
break;
case 'r': /* reset pulse */
do_reset(1);
_delay_ms(10);
do_reset(0);
ser_send('\n');
break;
case 'l': /* load eprom content */
{ {
uint8_t type = ser_recv(); uint8_t msgtype = ser_recv();
uint32_t length = (uint32_t)ser_recv() << 16; uint8_t length = ser_recv();
length |= ser_recv() << 8; uint8_t error_code = ERROR_INVALID_PARAMETER;
length |= ser_recv();
do_load(type, length); switch (msgtype)
{
case MSGTYPE_VERSION_REQ:
if (length == 0x00)
{
ser_send(MSGTYPE_VERSION_RSP);
ser_send(sizeof(version_str) -1);
const uint8_t * p_data = version_str;
while (*p_data)
{
ser_send(*p_data++);
} }
error_code = SUCCESS;
}
break;
case MSGTYPE_PAGESIZE_REQ:
if (length == 0x00)
{
ser_send(MSGTYPE_PAGESIZE_RSP);
ser_send(0x01);
ser_send(PAGESIZE_MAX);
error_code = SUCCESS;
}
break;
case MSGTYPE_CONFIG_REQ:
if (length == 0x03)
{
uint8_t eprom_type = ser_recv();
uint8_t pagesize = ser_recv();
uint8_t reset_polarity = ser_recv();
if (gdata.progmode == PROGMODE_ENABLED)
{
error_code = ERROR_INVALID_MODE;
}
else
{
if ((reset_polarity <= RESET_POLARITY_HIGH) &&
(pagesize <= PAGESIZE_MAX) &&
(set_eprom_type(eprom_type) == SUCCESS)
)
{
gdata.pagesize = pagesize;
gdata.reset_polarity = reset_polarity;
ser_send(MSGTYPE_CONFIG_RSP);
ser_send(0x00);
error_code = SUCCESS;
}
}
}
break;
case MSGTYPE_PROGMODE_REQ:
if (length == 0x01)
{
uint8_t progmode = ser_recv();
if (progmode <= PROGMODE_ENABLED)
{
set_progmode(progmode);
ser_send(MSGTYPE_PROGMODE_RSP);
ser_send(0x00);
error_code = SUCCESS;
}
}
break;
case MSGTYPE_SETADDRESS_REQ:
if (length == 0x03)
{
uint32_t address;
address = ser_recv();
address = (address << 8) | ser_recv();
address = (address << 8) | ser_recv();
if (address < gdata.address_max)
{
if (gdata.progmode == PROGMODE_DISABLED)
{
error_code = ERROR_INVALID_MODE;
}
else
{
set_address(address);
ser_send(MSGTYPE_SETADDRESS_RSP);
ser_send(0x00);
error_code = SUCCESS;
}
}
}
break;
case MSGTYPE_WRITE_REQ:
if ((length > 0) &&
(length <= gdata.pagesize)
)
{
if ((gdata.address >= gdata.address_max) ||
((gdata.address + length) > gdata.address_max)
)
{
error_code = ERROR_INVALID_ADDRESS;
}
else if (gdata.progmode == PROGMODE_DISABLED)
{
error_code = ERROR_INVALID_MODE;
}
else
{
write_data(length);
ser_send(MSGTYPE_WRITE_RSP);
ser_send(0x00);
error_code = SUCCESS;
}
}
break;
case MSGTYPE_READ_REQ:
error_code = ERROR_NOT_SUPPORTED;
break; break;
default: default:
ser_send('?'); error_code = ERROR_UNKNOWN_COMMAND;
break; break;
} }
if (error_code != SUCCESS)
{
/* read remaining request */
while (length--)
{
(void)ser_recv();
} }
}
ser_send(MSGTYPE_ERROR_RSP);
ser_send(0x01);
ser_send(error_code);
}
}
} /* main */