301 lines
11 KiB
C
301 lines
11 KiB
C
|
/*
|
||
|
|
* (C) Copyright 2001
|
||
|
|
* Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
|
||
|
|
*
|
||
|
|
* See file CREDITS for list of people who contributed to this
|
||
|
|
* project.
|
||
|
|
*
|
||
|
|
* This program is free software; you can redistribute it and/or
|
||
|
|
* modify it under the terms of the GNU General Public License as
|
||
|
|
* published by the Free Software Foundation; either version 2 of
|
||
|
|
* the License, or (at your option) any later version.
|
||
|
|
*
|
||
|
|
* This program is distributed in the hope that it will be useful,
|
||
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
* GNU General Public License for more details.
|
||
|
|
*
|
||
|
|
* You should have received a copy of the GNU General Public License
|
||
|
|
* along with this program; if not, write to the Free Software
|
||
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
|
* MA 02111-1307 USA
|
||
|
|
*/
|
||
|
|
|
||
|
|
/*
|
||
|
|
* board/config.h - configuration options, board specific
|
||
|
|
*/
|
||
|
|
|
||
|
|
#ifndef __CONFIG_H
|
||
|
|
#define __CONFIG_H
|
||
|
|
|
||
|
|
/*
|
||
|
|
* High Level Configuration Options
|
||
|
|
* (easy to change)
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
|
||
|
|
#define CONFIG_4xx 1 /* ...member of PPC4xx family */
|
||
|
|
#define CONFIG_ORSG 1 /* ...on a ORSG board */
|
||
|
|
|
||
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* call board_early_init_f() */
|
||
|
|
|
||
|
|
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
|
||
|
|
|
||
|
|
#define CONFIG_BAUDRATE 9600
|
||
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
|
||
|
|
|
||
|
|
#undef CONFIG_BOOTARGS
|
||
|
|
#define CONFIG_BOOTCOMMAND "go fff00100"
|
||
|
|
|
||
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
||
|
|
#define CFG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
||
|
|
|
||
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
||
|
|
#define CONFIG_PHY_ADDR 0 /* PHY address */
|
||
|
|
#define CONFIG_LXT971_NO_SLEEP 1 /* disable sleep mode in LXT971 */
|
||
|
|
|
||
|
|
#define CONFIG_COMMANDS ( CONFIG_CMD_DFL | \
|
||
|
|
CFG_CMD_PCI | \
|
||
|
|
CFG_CMD_IRQ | \
|
||
|
|
CFG_CMD_ASKENV | \
|
||
|
|
CFG_CMD_ELF | \
|
||
|
|
CFG_CMD_BSP | \
|
||
|
|
CFG_CMD_EEPROM )
|
||
|
|
|
||
|
|
#define CONFIG_MAC_PARTITION
|
||
|
|
#define CONFIG_DOS_PARTITION
|
||
|
|
|
||
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
||
|
|
#include <cmd_confdefs.h>
|
||
|
|
|
||
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
||
|
|
|
||
|
|
#define CONFIG_SDRAM_BANK0 1 /* init onboard SDRAM bank 0 */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Miscellaneous configurable options
|
||
|
|
*/
|
||
|
|
#define CFG_LONGHELP /* undef to save memory */
|
||
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
||
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
||
|
|
#else
|
||
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
||
|
|
#endif
|
||
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
||
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
||
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
||
|
|
|
||
|
|
#define CFG_CONSOLE_INFO_QUIET 1 /* don't print console @ startup*/
|
||
|
|
|
||
|
|
#define CFG_MEMTEST_START 0x0400000 /* memtest works on */
|
||
|
|
#define CFG_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
||
|
|
|
||
|
|
#undef CFG_EXT_SERIAL_CLOCK /* no external serial clock used */
|
||
|
|
#define CFG_IGNORE_405_UART_ERRATA_59 /* ignore ppc405gp errata #59 */
|
||
|
|
#define CFG_BASE_BAUD 691200
|
||
|
|
|
||
|
|
/* The following table includes the supported baudrates */
|
||
|
|
#define CFG_BAUDRATE_TABLE \
|
||
|
|
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
||
|
|
57600, 115200, 230400, 460800, 921600 }
|
||
|
|
|
||
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
||
|
|
#define CFG_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
||
|
|
|
||
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
||
|
|
|
||
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* PCI stuff
|
||
|
|
*-----------------------------------------------------------------------
|
||
|
|
*/
|
||
|
|
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
||
|
|
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
||
|
|
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
||
|
|
|
||
|
|
#define CONFIG_PCI /* include pci support */
|
||
|
|
#define CONFIG_PCI_HOST PCI_HOST_ADAPTER /* select pci adapter */
|
||
|
|
#undef CONFIG_PCI_PNP /* no pci plug-and-play */
|
||
|
|
/* resource configuration */
|
||
|
|
|
||
|
|
#undef CONFIG_PCI_SCAN_SHOW /* print pci devices @ startup */
|
||
|
|
|
||
|
|
#define CFG_PCI_SUBSYS_VENDORID 0x12FE /* PCI Vendor ID: esd gmbh */
|
||
|
|
#define CFG_PCI_SUBSYS_DEVICEID 0x0411 /* PCI Device ID: ORSG */
|
||
|
|
#define CFG_PCI_CLASSCODE 0x0b20 /* PCI Class Code: Processor/PPC*/
|
||
|
|
#define CFG_PCI_PTM1LA 0x00000000 /* point to sdram */
|
||
|
|
#define CFG_PCI_PTM1MS 0xfc000001 /* 64MB, enable hard-wired to 1 */
|
||
|
|
#define CFG_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
||
|
|
#define CFG_PCI_PTM2LA 0xffc00000 /* point to flash */
|
||
|
|
#define CFG_PCI_PTM2MS 0xffc00001 /* 4MB, enable */
|
||
|
|
#define CFG_PCI_PTM2PCI 0x04000000 /* Host: use this pci address */
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* Start addresses for the final memory configuration
|
||
|
|
* (Set up by the startup code)
|
||
|
|
* Please note that CFG_SDRAM_BASE _must_ start at 0
|
||
|
|
*/
|
||
|
|
#define CFG_SDRAM_BASE 0x00000000
|
||
|
|
#define CFG_FLASH_BASE 0xFFFD0000
|
||
|
|
#define CFG_MONITOR_BASE CFG_FLASH_BASE
|
||
|
|
#define CFG_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
|
||
|
|
#define CFG_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
|
||
|
|
|
||
|
|
/*
|
||
|
|
* For booting Linux, the board info and command line data
|
||
|
|
* have to be in the first 8 MB of memory, since this is
|
||
|
|
* the maximum mapped by the Linux kernel during initialization.
|
||
|
|
*/
|
||
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* FLASH organization
|
||
|
|
*/
|
||
|
|
#define CFG_MAX_FLASH_BANKS 2 /* max number of memory banks */
|
||
|
|
#define CFG_MAX_FLASH_SECT 256 /* max number of sectors on one chip */
|
||
|
|
|
||
|
|
#define CFG_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
||
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
||
|
|
|
||
|
|
#define CFG_FLASH_WORD_SIZE unsigned short /* flash word size (width) */
|
||
|
|
#define CFG_FLASH_ADDR0 0x5555 /* 1st address for flash config cycles */
|
||
|
|
#define CFG_FLASH_ADDR1 0x2AAA /* 2nd address for flash config cycles */
|
||
|
|
/*
|
||
|
|
* The following defines are added for buggy IOP480 byte interface.
|
||
|
|
* All other boards should use the standard values (CPCI405 etc.)
|
||
|
|
*/
|
||
|
|
#define CFG_FLASH_READ0 0x0000 /* 0 is standard */
|
||
|
|
#define CFG_FLASH_READ1 0x0001 /* 1 is standard */
|
||
|
|
#define CFG_FLASH_READ2 0x0002 /* 2 is standard */
|
||
|
|
|
||
|
|
#define CFG_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
||
|
|
|
||
|
|
#if 0 /* Use NVRAM for environment variables */
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* NVRAM organization
|
||
|
|
*/
|
||
|
|
#define CFG_ENV_IS_IN_NVRAM 1 /* use NVRAM for environment vars */
|
||
|
|
#define CFG_NVRAM_BASE_ADDR 0xf0200000 /* NVRAM base address */
|
||
|
|
#define CFG_NVRAM_SIZE (32*1024) /* NVRAM size */
|
||
|
|
#define CFG_ENV_SIZE 0x1000 /* Size of Environment vars */
|
||
|
|
#define CFG_ENV_ADDR \
|
||
|
|
(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE) /* Env */
|
||
|
|
#define CFG_NVRAM_VXWORKS_OFFS 0x6900 /* Offset for VxWorks eth-addr */
|
||
|
|
|
||
|
|
#else /* Use EEPROM for environment variables */
|
||
|
|
|
||
|
|
#define CFG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
||
|
|
#define CFG_ENV_OFFSET 0x000 /* environment starts at the beginning of the EEPROM */
|
||
|
|
#define CFG_ENV_SIZE 0x300 /* 768 bytes may be used for env vars */
|
||
|
|
/* total size of a CAT24WC08 is 1024 bytes */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* I2C EEPROM (CAT24WC08) for environment
|
||
|
|
*/
|
||
|
|
#define CONFIG_HARD_I2C /* I2c with hardware support */
|
||
|
|
#define CFG_I2C_SPEED 400000 /* I2C speed and slave address */
|
||
|
|
#define CFG_I2C_SLAVE 0x7F
|
||
|
|
|
||
|
|
#define CFG_I2C_EEPROM_ADDR 0x50 /* EEPROM CAT28WC08 */
|
||
|
|
#define CFG_I2C_EEPROM_ADDR_LEN 1 /* Bytes of address */
|
||
|
|
/* mask of address bits that overflow into the "EEPROM chip address" */
|
||
|
|
#define CFG_I2C_EEPROM_ADDR_OVERFLOW 0x07
|
||
|
|
#define CFG_EEPROM_PAGE_WRITE_BITS 4 /* The Catalyst CAT24WC08 has */
|
||
|
|
/* 16 byte page write mode using*/
|
||
|
|
/* last 4 bits of the address */
|
||
|
|
#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
||
|
|
#define CFG_EEPROM_PAGE_WRITE_ENABLE
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* Cache Configuration
|
||
|
|
*/
|
||
|
|
#define CFG_DCACHE_SIZE 8192 /* For AMCC 405 CPUs */
|
||
|
|
#define CFG_CACHELINE_SIZE 32 /* ... */
|
||
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
||
|
|
#define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
||
|
|
#endif
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Init Memory Controller:
|
||
|
|
*
|
||
|
|
* BR0/1 and OR0/1 (FLASH)
|
||
|
|
*/
|
||
|
|
|
||
|
|
#define FLASH_BASE0_PRELIM 0xFF800000 /* FLASH bank #0 */
|
||
|
|
#define FLASH_BASE1_PRELIM 0xFFC00000 /* FLASH bank #1 */
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* External Bus Controller (EBC) Setup
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* Memory Bank 0 (Flash Bank 0) initialization */
|
||
|
|
#define CFG_EBC_PB0AP 0x92015480
|
||
|
|
#define CFG_EBC_PB0CR 0xFFC5A000 /* BAS=0xFFC,BS=4MB,BU=R/W,BW=16bit */
|
||
|
|
|
||
|
|
/* Memory Bank 1 (Flash Bank 1) initialization */
|
||
|
|
#define CFG_EBC_PB1AP 0x92015480
|
||
|
|
#define CFG_EBC_PB1CR 0xFF85A000 /* BAS=0xFF8,BS=4MB,BU=R/W,BW=16bit */
|
||
|
|
|
||
|
|
/* Memory Bank 2 (PLD - FPGA-boot) initialization */
|
||
|
|
#define CFG_EBC_PB2AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB2CR 0xF0018000 /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit */
|
||
|
|
|
||
|
|
/* Memory Bank 3 (PLD - OSL) initialization */
|
||
|
|
#define CFG_EBC_PB3AP 0x02015480 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x0,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB3CR 0xF0118000 /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit */
|
||
|
|
|
||
|
|
/* Memory Bank 4 (Spartan2 1) initialization */
|
||
|
|
#define CFG_EBC_PB4AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB4CR 0xF209C000 /* BAS=0xF20,BS=16MB,BU=R/W,BW=32bit*/
|
||
|
|
|
||
|
|
/* Memory Bank 5 (Spartan2 2) initialization */
|
||
|
|
#define CFG_EBC_PB5AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB5CR 0xF309C000 /* BAS=0xF30,BS=16MB,BU=R/W,BW=32bit*/
|
||
|
|
|
||
|
|
/* Memory Bank 6 (Virtex 1) initialization */
|
||
|
|
#define CFG_EBC_PB6AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB6CR 0xF409A000 /* BAS=0xF40,BS=16MB,BU=R/W,BW=16bit*/
|
||
|
|
|
||
|
|
/* Memory Bank 7 (Virtex 2) initialization */
|
||
|
|
#define CFG_EBC_PB7AP 0x02015580 /* BME=0x0,TWT=0x04,CSN=0x0,OEN=0x1 */
|
||
|
|
/* WBN=0x1,WBF=0x1,TH=0x2,RE=0x1,SOR=0x1,BEM=0x0,PEN=0x0*/
|
||
|
|
#define CFG_EBC_PB7CR 0xF509A000 /* BAS=0xF50,BS=16MB,BU=R/W,BW=16bit*/
|
||
|
|
|
||
|
|
|
||
|
|
#define CFG_VXWORKS_MAC_PTR 0x00000000 /* Pass Ethernet MAC to VxWorks */
|
||
|
|
|
||
|
|
/*-----------------------------------------------------------------------
|
||
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
||
|
|
*/
|
||
|
|
|
||
|
|
/* use on chip memory ( OCM ) for temperary stack until sdram is tested */
|
||
|
|
#define CFG_TEMP_STACK_OCM 1
|
||
|
|
|
||
|
|
/* On Chip Memory location */
|
||
|
|
#define CFG_OCM_DATA_ADDR 0xF8000000
|
||
|
|
#define CFG_OCM_DATA_SIZE 0x1000
|
||
|
|
|
||
|
|
#define CFG_INIT_RAM_ADDR CFG_OCM_DATA_ADDR /* inside of SDRAM */
|
||
|
|
#define CFG_INIT_RAM_END CFG_OCM_DATA_SIZE /* End of used area in RAM */
|
||
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
||
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
||
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
||
|
|
|
||
|
|
|
||
|
|
/*
|
||
|
|
* Internal Definitions
|
||
|
|
*
|
||
|
|
* Boot Flags
|
||
|
|
*/
|
||
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
||
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
||
|
|
|
||
|
|
#endif /* __CONFIG_H */
|