1
0
uboot-1.1.4-kirkwood/board/amirix/ap1000/powerspan.h

171 lines
6.0 KiB
C
Raw Normal View History

2024-01-07 23:57:24 +01:00
/**
* @file powerspan.h Header file for PowerSpan II code.
*/
/*
* (C) Copyright 2005
* AMIRIX Systems Inc.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#ifndef POWERSPAN_H
#define POWERSPAN_H
#define CLEAR_MASTER_ABORT 0xdeadbeef
#define NO_DEVICE_FOUND -1
#define ILLEGAL_REG_OFFSET -2
#define I2C_BUSY -3
#define I2C_ERR -4
#define REG_P1_CSR 0x004
#define REGS_P1_BST 0x018
#define REG_P1_ERR_CSR 0x150
#define REG_P1_MISC_CSR 0x160
#define REGS_P1_TGT_CSR 0x100
#define REGS_P1_TGT_TADDR 0x104
#define REGS_PB_SLAVE_CSR 0x200
#define REGS_PB_SLAVE_TADDR 0x204
#define REGS_PB_SLAVE_BADDR 0x208
#define REG_CONFIG_ADDRESS 0x290
#define REG_CONFIG_DATA 0x294
#define REG_PB_ERR_CSR 0x2B0
#define REG_PB_MISC_CSR 0x2C0
#define REG_MISC_CSR 0x400
#define REG_I2C_CSR 0x408
#define REG_RESET_CSR 0x40C
#define REG_ISR0 0x410
#define REG_ISR1 0x414
#define REG_IER0 0x418
#define REG_MBOX_MAP 0x420
#define REG_HW_MAP 0x42C
#define REG_IDR 0x444
#define CSR_MEMORY_SPACE_ENABLE 0x00000002
#define CSR_PCI_MASTER_ENABLE 0x00000004
#define P1_BST_OFF 0x04
#define PX_ERR_ERR_STATUS 0x01000000
#define PX_MISC_CSR_MAX_RETRY_MASK 0x00000F00
#define PX_MISC_CSR_MAX_RETRY 0x00000F00
#define PX_MISC_REG_BAR_ENABLE 0x00008000
#define PB_MISC_TEA_ENABLE 0x00000010
#define PB_MISC_MAC_TEA 0x00000040
#define P1_TGT_IMAGE_OFF 0x010
#define PX_TGT_CSR_IMG_EN 0x80000000
#define PX_TGT_CSR_TA_EN 0x40000000
#define PX_TGT_CSR_BAR_EN 0x20000000
#define PX_TGT_CSR_MD_EN 0x10000000
#define PX_TGT_CSR_MODE 0x00800000
#define PX_TGT_CSR_DEST 0x00400000
#define PX_TGT_CSR_MEM_IO 0x00200000
#define PX_TGT_CSR_GBL 0x00080000
#define PX_TGT_CSR_CL 0x00040000
#define PX_TGT_CSR_PRKEEP 0x00000080
#define PX_TGT_CSR_BS_MASK 0x0F000000
#define PX_TGT_MEM_IO 0x00200000
#define PX_TGT_CSR_RTT_MASK 0x001F0000
#define PX_TGT_CSR_RTT_READ 0x000A0000
#define PX_TGT_CSR_WTT_MASK 0x00001F00
#define PX_TGT_CSR_WTT_WFLUSH 0x00000200
#define PX_TGT_CSR_END_MASK 0x00000060
#define PX_TGT_CSR_BIG_END 0x00000040
#define PX_TGT_CSR_TRUE_LEND 0x00000060
#define PX_TGT_CSR_RDAMT_MASK 0x00000007
#define PX_TGT_CSR_BS_64MB 0xa
#define PX_TGT_CSR_BS_16MB 0x8
#define PX_TGT_USE_MEM_IO 1
#define PX_TGT_NOT_MEM_IO 0
#define PB_SLAVE_IMAGE_OFF 0x010
#define PB_SLAVE_CSR_IMG_EN 0x80000000
#define PB_SLAVE_CSR_TA_EN 0x40000000
#define PB_SLAVE_CSR_MD_EN 0x20000000
#define PB_SLAVE_CSR_MODE 0x00800000
#define PB_SLAVE_CSR_DEST 0x00400000
#define PB_SLAVE_CSR_MEM_IO 0x00200000
#define PB_SLAVE_CSR_PRKEEP 0x00000080
#define PB_SLAVE_CSR_BS_MASK 0x1F000000
#define PB_SLAVE_CSR_END_MASK 0x00000060
#define PB_SLAVE_CSR_BIG_END 0x00000040
#define PB_SLAVE_CSR_TRUE_LEND 0x00000060
#define PB_SLAVE_CSR_RDAMT_MASK 0x00000007
#define PB_SLAVE_USE_MEM_IO 1
#define PB_SLAVE_NOT_MEM_IO 0
#define MISC_CSR_PCI1_LOCK 0x00000080
#define I2C_CSR_ADDR 0xFF000000 /* Specifies I2C Device Address to be Accessed */
#define I2C_CSR_DATA 0x00FF0000 /* Specifies the Required Data for a Write */
#define I2C_CSR_DEV_CODE 0x0000F000 /* Device Select. I2C 4-bit Device Code */
#define I2C_CSR_CS 0x00000E00 /* Chip Select */
#define I2C_CSR_RW 0x00000100 /* Read/Write */
#define I2C_CSR_ACT 0x00000080 /* I2C Interface Active */
#define I2C_CSR_ERR 0x00000040 /* Error */
#define I2C_EEPROM_DEV 0xa
#define I2C_EEPROM_CHIP_SEL 0
#define I2C_READ 0
#define I2C_WRITE 1
#define RESET_CSR_EEPROM_LOAD 0x00000010
#define ISR_CLEAR_ALL 0xFFFFFFFF
#define IER0_DMA_INTS_EN 0x0F000000
#define IER0_PCI_1_EN 0x00400000
#define IER0_HW_INTS_EN 0x003F0000
#define IER0_MB_INTS_EN 0x000000FF
#define IER0_DEFAULT (IER0_DMA_INTS_EN | IER0_PCI_1_EN | IER0_HW_INTS_EN | IER0_MB_INTS_EN)
#define MBOX_MAP_TO_INT4 0xCCCCCCCC
#define HW_MAP_HW4_TO_INT4 0x000C0000
#define IDR_PCI_A_OUT 0x40000000
#define IDR_MBOX_OUT 0x10000000
int pci_read_config_byte(int bus, int dev, int fn, int reg, unsigned char* val);
int pci_write_config_byte(int bus, int dev, int fn, int reg, unsigned char val);
int pci_read_config_word(int bus, int dev, int fn, int reg, unsigned short* val);
int pci_write_config_word(int bus, int dev, int fn, int reg, unsigned short val);
int pci_read_config_dword(int bus, int dev, int fn, int reg, unsigned long* val);
int pci_write_config_dword(int bus, int dev, int fn, int reg, unsigned long val);
unsigned int PowerSpanRead(unsigned int theOffset);
void PowerSpanWrite(unsigned int theOffset, unsigned int theValue);
int I2CAccess(unsigned char theI2CAddress, unsigned char theDevCode, unsigned char theChipSel, unsigned char* theValue, int RWFlag);
int PCIWriteConfig(int bus, int dev, int fn, int reg, int width, unsigned long val);
int PCIReadConfig(int bus, int dev, int fn, int reg, int width, unsigned long* val);
int SetSlaveImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr);
int SetTargetImage(int theImageIndex, unsigned int theBlockSize, int theMemIOFlag, int theEndianness, unsigned int theLocalBaseAddr, unsigned int thePCIBaseAddr);
#endif