1
0
uboot-1.1.4-kirkwood/board/amcc/bamboo/init.S

114 lines
3.7 KiB
ArmAsm
Raw Normal View History

2024-01-07 23:57:24 +01:00
/*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <ppc_asm.tmpl>
#include <config.h>
/* General */
#define TLB_VALID 0x00000200
/* Supported page sizes */
#define SZ_1K 0x00000000
#define SZ_4K 0x00000010
#define SZ_16K 0x00000020
#define SZ_64K 0x00000030
#define SZ_256K 0x00000040
#define SZ_1M 0x00000050
#define SZ_8M 0x00000060
#define SZ_16M 0x00000070
#define SZ_256M 0x00000090
/* Storage attributes */
#define SA_W 0x00000800 /* Write-through */
#define SA_I 0x00000400 /* Caching inhibited */
#define SA_M 0x00000200 /* Memory coherence */
#define SA_G 0x00000100 /* Guarded */
#define SA_E 0x00000080 /* Endian */
/* Access control */
#define AC_X 0x00000024 /* Execute */
#define AC_W 0x00000012 /* Write */
#define AC_R 0x00000009 /* Read */
/* Some handy macros */
#define EPN(e) ((e) & 0xfffffc00)
#define TLB0(epn,sz) ( (EPN((epn)) | (sz) | TLB_VALID ) )
#define TLB1(rpn,erpn) ( ((rpn)&0xfffffc00) | (erpn) )
#define TLB2(a) ( (a)&0x00000fbf )
#define tlbtab_start\
mflr r1 ;\
bl 0f ;
#define tlbtab_end\
.long 0, 0, 0 ; \
0: mflr r0 ; \
mtlr r1 ; \
blr ;
#define tlbentry(epn,sz,rpn,erpn,attr)\
.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
/**************************************************************************
* TLB TABLE
*
* This table is used by the cpu boot code to setup the initial tlb
* entries. Rather than make broad assumptions in the cpu source tree,
* this table lets each board set things up however they like.
*
* Pointer to the table is returned in r1
*
*************************************************************************/
.section .bootpg,"ax"
.globl tlbtab
tlbtab:
tlbtab_start
/*
* BOOT_CS (FLASH) must be first. Before relocation SA_I can be off to use the
* speed up boot process. It is patched after relocation to enable SA_I
*/
tlbentry( CFG_BOOT_BASE_ADDR, SZ_256M, CFG_BOOT_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
/* TLB-entry for init-ram in dcache (SA_I must be turned off!) */
tlbentry( CFG_INIT_RAM_ADDR, SZ_64K, CFG_INIT_RAM_ADDR, 0, AC_R|AC_W|AC_X|SA_G )
tlbentry( CFG_SDRAM_BASE, SZ_256M, CFG_SDRAM_BASE, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
tlbentry( CFG_PCI_BASE, SZ_256M, CFG_PCI_BASE, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_NVRAM_BASE_ADDR, SZ_256M, CFG_NVRAM_BASE_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
tlbentry( CFG_NAND_ADDR, SZ_256M, CFG_NAND_ADDR, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
/* PCI */
tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
/* USB 2.0 Device */
tlbentry( CFG_USB_DEVICE, SZ_1K, CFG_USB_DEVICE, 0, AC_R|AC_W|SA_G|SA_I )
tlbtab_end