1
0
uboot-1.1.4-kirkwood/doc/README.cmi

85 lines
1.9 KiB
Plaintext
Raw Normal View History

2024-01-07 23:57:24 +01:00
Summary:
========
This file contains information about the cmi board configuration.
Please see cmi_mpc5xx_config for further details. The cmi board is
a customer specific board but should work with small modifications
on every board which has a MPC5xx and either a 28F128J3A,
28F320J3A or 28F640J3A Intel flash mounted.
Board Discription:
==================
* Motorola MPC555
* RS232 connection
* Intel flash 28F640J3A
* Micron SRAM 1M
* Altera PLD
Bootstrap:
==========
In contrast to the usual boot sequence used in U-Boot, on the
cmi board we don't boot from the external flash directly.
Because of we use a 16-bit flash and don't sample a RCW
from the data bus to set the startup buswidth to 16-bit.
Unfortunatly the default width, sampled from the default RCW
is 32-bit. For this reason we burn the proper RCW into the
internal flash shadow location and boot after power-on or
reset from the internal flash and then branch to 0x02000100
where the U-Boot reset vector handler is located.
Memory Map:
===========
Memory Map after relocation:
0x0000 0000 CFG_SDRAM_BASE
:
0x000F 9FFF
:
:
0x0100 0000 CFG_IMMR (Internal memory map base adress)
:
0x0130 7FFF
:
:
0x0200 0000 CFG_FLASH_BASE
:
0x027C FFFF
:
:
0x0300 0000 PLD_BASE
Flash Partition:
0x0200 0000 Block 0 and 1 contain U-Boot except
: environment
:
0x0201 FFFF
0x0202 0000 Block 2 contains environment (.ppcenv)
:
0x0202 FFFF
See README file for futher information about U-Boot relocation
and partitioning.
Tested Features:
================
* U-Boot commands: go, loads, loadb, all memory features, printenv,
setenv, saveenv, protect, erase, fli, bdi, mtest, reset, version,
coninfo, help (see configuration file for available commands)
* Blinking led to indicate boot process
Added or Changed Files:
=======================
u-boot-0.2.0/board/cmi/*
u-boot-0.2.0/include/configs/cmi_mpc5xx.h
Regards,
Martin