1094 lines
26 KiB
ArmAsm
1094 lines
26 KiB
ArmAsm
/*
|
|
* Copyright (C) 1998 Dan Malek <dmalek@jlc.net>
|
|
* Copyright (C) 1999 Magnus Damm <kieraypc01.p.y.kie.era.ericsson.se>
|
|
* Copyright (C) 2000, 2001,2002 Wolfgang Denk <wd@denx.de>
|
|
* Copyright 2004 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* U-Boot - Startup Code for MPC83xx PowerPC based Embedded Boards
|
|
*/
|
|
|
|
#include <config.h>
|
|
#include <mpc83xx.h>
|
|
#include <version.h>
|
|
|
|
#define CONFIG_83XX 1 /* needed for Linux kernel header files*/
|
|
#define _LINUX_CONFIG_H 1 /* avoid reading Linux autoconf.h file */
|
|
|
|
#include <ppc_asm.tmpl>
|
|
#include <ppc_defs.h>
|
|
|
|
#include <asm/cache.h>
|
|
#include <asm/mmu.h>
|
|
|
|
#ifndef CONFIG_IDENT_STRING
|
|
#define CONFIG_IDENT_STRING "MPC83XX"
|
|
#endif
|
|
|
|
/* We don't want the MMU yet.
|
|
*/
|
|
#undef MSR_KERNEL
|
|
|
|
/*
|
|
* Floating Point enable, Machine Check and Recoverable Interr.
|
|
*/
|
|
#ifdef DEBUG
|
|
#define MSR_KERNEL (MSR_FP|MSR_RI)
|
|
#else
|
|
#define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI)
|
|
#endif
|
|
|
|
/*
|
|
* Set up GOT: Global Offset Table
|
|
*
|
|
* Use r14 to access the GOT
|
|
*/
|
|
START_GOT
|
|
GOT_ENTRY(_GOT2_TABLE_)
|
|
GOT_ENTRY(_FIXUP_TABLE_)
|
|
|
|
GOT_ENTRY(_start)
|
|
GOT_ENTRY(_start_of_vectors)
|
|
GOT_ENTRY(_end_of_vectors)
|
|
GOT_ENTRY(transfer_to_handler)
|
|
|
|
GOT_ENTRY(__init_end)
|
|
GOT_ENTRY(_end)
|
|
GOT_ENTRY(__bss_start)
|
|
END_GOT
|
|
|
|
/*
|
|
* Version string - must be in data segment because MPC83xx uses the
|
|
* first 256 bytes for the Hard Reset Configuration Word table (see
|
|
* below). Similarly, can't have the U-Boot Magic Number as the first
|
|
* thing in the image - don't know how this will affect the image tools,
|
|
* but I guess I'll find out soon.
|
|
*/
|
|
.data
|
|
.globl version_string
|
|
version_string:
|
|
.ascii U_BOOT_VERSION
|
|
.ascii " (", __DATE__, " - ", __TIME__, ")"
|
|
.ascii " ", CONFIG_IDENT_STRING, "\0"
|
|
|
|
.text
|
|
#define _HRCW_TABLE_ENTRY(w) \
|
|
.fill 8,1,(((w)>>24)&0xff); \
|
|
.fill 8,1,(((w)>>16)&0xff); \
|
|
.fill 8,1,(((w)>> 8)&0xff); \
|
|
.fill 8,1,(((w) )&0xff)
|
|
|
|
_HRCW_TABLE_ENTRY(CFG_HRCW_LOW)
|
|
_HRCW_TABLE_ENTRY(CFG_HRCW_HIGH)
|
|
|
|
|
|
#ifndef CONFIG_DEFAULT_IMMR
|
|
#error CONFIG_DEFAULT_IMMR must be defined
|
|
#endif /* CFG_DEFAULT_IMMR */
|
|
#ifndef CFG_IMMRBAR
|
|
#define CFG_IMMRBAR CONFIG_DEFAULT_IMMR
|
|
#endif /* CFG_IMMRBAR */
|
|
|
|
/*
|
|
* After configuration, a system reset exception is executed using the
|
|
* vector at offset 0x100 relative to the base set by MSR[IP]. If
|
|
* MSR[IP] is 0, the base address is 0x00000000. If MSR[IP] is 1, the
|
|
* base address is 0xfff00000. In the case of a Power On Reset or Hard
|
|
* Reset, the value of MSR[IP] is determined by the CIP field in the
|
|
* HRCW.
|
|
*
|
|
* Other bits in the HRCW set up the Base Address and Port Size in BR0.
|
|
* This determines the location of the boot ROM (flash or EPROM) in the
|
|
* processor's address space at boot time. As long as the HRCW is set up
|
|
* so that we eventually end up executing the code below when the
|
|
* processor executes the reset exception, the actual values used should
|
|
* not matter.
|
|
*
|
|
* Once we have got here, the address mask in OR0 is cleared so that the
|
|
* bottom 32K of the boot ROM is effectively repeated all throughout the
|
|
* processor's address space, after which we can jump to the absolute
|
|
* address at which the boot ROM was linked at compile time, and proceed
|
|
* to initialise the memory controller without worrying if the rug will
|
|
* be pulled out from under us, so to speak (it will be fine as long as
|
|
* we configure BR0 with the same boot ROM link address).
|
|
*/
|
|
. = EXC_OFF_SYS_RESET
|
|
|
|
.globl _start
|
|
_start: /* time t 0 */
|
|
li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH*/
|
|
nop
|
|
b boot_cold
|
|
|
|
. = EXC_OFF_SYS_RESET + 0x10
|
|
|
|
.globl _start_warm
|
|
_start_warm:
|
|
li r21, BOOTFLAG_WARM /* Software reboot */
|
|
b boot_warm
|
|
|
|
|
|
boot_cold: /* time t 3 */
|
|
lis r4, CONFIG_DEFAULT_IMMR@h
|
|
nop
|
|
boot_warm: /* time t 5 */
|
|
mfmsr r5 /* save msr contents */
|
|
lis r3, CFG_IMMRBAR@h
|
|
ori r3, r3, CFG_IMMRBAR@l
|
|
stw r3, IMMRBAR(r4)
|
|
|
|
/* Initialise the E300 processor core */
|
|
/*------------------------------------------*/
|
|
|
|
bl init_e300_core
|
|
|
|
#ifndef CFG_RAMBOOT
|
|
|
|
/* Inflate flash location so it appears everywhere, calculate */
|
|
/* the absolute address in final location of the FLASH, jump */
|
|
/* there and deflate the flash size back to minimal size */
|
|
/*------------------------------------------------------------*/
|
|
bl map_flash_by_law1
|
|
lis r4, (CFG_MONITOR_BASE)@h
|
|
ori r4, r4, (CFG_MONITOR_BASE)@l
|
|
addi r5, r4, in_flash - _start + EXC_OFF_SYS_RESET
|
|
mtlr r5
|
|
blr
|
|
in_flash:
|
|
#if 1 /* Remapping flash with LAW0. */
|
|
bl remap_flash_by_law0
|
|
#endif
|
|
#endif /* CFG_RAMBOOT */
|
|
|
|
bl setup_stack_in_data_cache_on_r1
|
|
|
|
/* let the C-code set up the rest */
|
|
/* */
|
|
/* Be careful to keep code relocatable & stack humble */
|
|
/*------------------------------------------------------*/
|
|
|
|
GET_GOT /* initialize GOT access */
|
|
|
|
/* r3: IMMR */
|
|
lis r3, CFG_IMMRBAR@h
|
|
/* run low-level CPU init code (in Flash)*/
|
|
bl cpu_init_f
|
|
|
|
/* r3: BOOTFLAG */
|
|
mr r3, r21
|
|
/* run 1st part of board init code (in Flash)*/
|
|
bl board_init_f
|
|
|
|
/*
|
|
* Vector Table
|
|
*/
|
|
|
|
.globl _start_of_vectors
|
|
_start_of_vectors:
|
|
|
|
/* Machine check */
|
|
STD_EXCEPTION(0x200, MachineCheck, MachineCheckException)
|
|
|
|
/* Data Storage exception. */
|
|
STD_EXCEPTION(0x300, DataStorage, UnknownException)
|
|
|
|
/* Instruction Storage exception. */
|
|
STD_EXCEPTION(0x400, InstStorage, UnknownException)
|
|
|
|
/* External Interrupt exception. */
|
|
#ifndef FIXME
|
|
STD_EXCEPTION(0x500, ExtInterrupt, external_interrupt)
|
|
#endif
|
|
|
|
/* Alignment exception. */
|
|
. = 0x600
|
|
Alignment:
|
|
EXCEPTION_PROLOG
|
|
mfspr r4,DAR
|
|
stw r4,_DAR(r21)
|
|
mfspr r5,DSISR
|
|
stw r5,_DSISR(r21)
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
li r20,MSR_KERNEL
|
|
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
|
|
rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
|
|
lwz r6,GOT(transfer_to_handler)
|
|
mtlr r6
|
|
blrl
|
|
.L_Alignment:
|
|
.long AlignmentException - _start + EXC_OFF_SYS_RESET
|
|
.long int_return - _start + EXC_OFF_SYS_RESET
|
|
|
|
/* Program check exception */
|
|
. = 0x700
|
|
ProgramCheck:
|
|
EXCEPTION_PROLOG
|
|
addi r3,r1,STACK_FRAME_OVERHEAD
|
|
li r20,MSR_KERNEL
|
|
rlwimi r20,r23,0,16,16 /* copy EE bit from saved MSR */
|
|
rlwimi r20,r23,0,25,25 /* copy IP bit from saved MSR */
|
|
lwz r6,GOT(transfer_to_handler)
|
|
mtlr r6
|
|
blrl
|
|
.L_ProgramCheck:
|
|
.long ProgramCheckException - _start + EXC_OFF_SYS_RESET
|
|
.long int_return - _start + EXC_OFF_SYS_RESET
|
|
|
|
STD_EXCEPTION(0x800, FPUnavailable, UnknownException)
|
|
|
|
/* I guess we could implement decrementer, and may have
|
|
* to someday for timekeeping.
|
|
*/
|
|
STD_EXCEPTION(0x900, Decrementer, timer_interrupt)
|
|
|
|
STD_EXCEPTION(0xa00, Trap_0a, UnknownException)
|
|
STD_EXCEPTION(0xb00, Trap_0b, UnknownException)
|
|
STD_EXCEPTION(0xc00, SystemCall, UnknownException)
|
|
STD_EXCEPTION(0xd00, SingleStep, UnknownException)
|
|
|
|
STD_EXCEPTION(0xe00, Trap_0e, UnknownException)
|
|
STD_EXCEPTION(0xf00, Trap_0f, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1000, InstructionTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1100, DataLoadTLBMiss, UnknownException)
|
|
STD_EXCEPTION(0x1200, DataStoreTLBMiss, UnknownException)
|
|
#ifdef DEBUG
|
|
. = 0x1300
|
|
/*
|
|
* This exception occurs when the program counter matches the
|
|
* Instruction Address Breakpoint Register (IABR).
|
|
*
|
|
* I want the cpu to halt if this occurs so I can hunt around
|
|
* with the debugger and look at things.
|
|
*
|
|
* When DEBUG is defined, both machine check enable (in the MSR)
|
|
* and checkstop reset enable (in the reset mode register) are
|
|
* turned off and so a checkstop condition will result in the cpu
|
|
* halting.
|
|
*
|
|
* I force the cpu into a checkstop condition by putting an illegal
|
|
* instruction here (at least this is the theory).
|
|
*
|
|
* well - that didnt work, so just do an infinite loop!
|
|
*/
|
|
1: b 1b
|
|
#else
|
|
STD_EXCEPTION(0x1300, InstructionBreakpoint, DebugException)
|
|
#endif
|
|
STD_EXCEPTION(0x1400, SMI, UnknownException)
|
|
|
|
STD_EXCEPTION(0x1500, Trap_15, UnknownException)
|
|
STD_EXCEPTION(0x1600, Trap_16, UnknownException)
|
|
STD_EXCEPTION(0x1700, Trap_17, UnknownException)
|
|
STD_EXCEPTION(0x1800, Trap_18, UnknownException)
|
|
STD_EXCEPTION(0x1900, Trap_19, UnknownException)
|
|
STD_EXCEPTION(0x1a00, Trap_1a, UnknownException)
|
|
STD_EXCEPTION(0x1b00, Trap_1b, UnknownException)
|
|
STD_EXCEPTION(0x1c00, Trap_1c, UnknownException)
|
|
STD_EXCEPTION(0x1d00, Trap_1d, UnknownException)
|
|
STD_EXCEPTION(0x1e00, Trap_1e, UnknownException)
|
|
STD_EXCEPTION(0x1f00, Trap_1f, UnknownException)
|
|
STD_EXCEPTION(0x2000, Trap_20, UnknownException)
|
|
STD_EXCEPTION(0x2100, Trap_21, UnknownException)
|
|
STD_EXCEPTION(0x2200, Trap_22, UnknownException)
|
|
STD_EXCEPTION(0x2300, Trap_23, UnknownException)
|
|
STD_EXCEPTION(0x2400, Trap_24, UnknownException)
|
|
STD_EXCEPTION(0x2500, Trap_25, UnknownException)
|
|
STD_EXCEPTION(0x2600, Trap_26, UnknownException)
|
|
STD_EXCEPTION(0x2700, Trap_27, UnknownException)
|
|
STD_EXCEPTION(0x2800, Trap_28, UnknownException)
|
|
STD_EXCEPTION(0x2900, Trap_29, UnknownException)
|
|
STD_EXCEPTION(0x2a00, Trap_2a, UnknownException)
|
|
STD_EXCEPTION(0x2b00, Trap_2b, UnknownException)
|
|
STD_EXCEPTION(0x2c00, Trap_2c, UnknownException)
|
|
STD_EXCEPTION(0x2d00, Trap_2d, UnknownException)
|
|
STD_EXCEPTION(0x2e00, Trap_2e, UnknownException)
|
|
STD_EXCEPTION(0x2f00, Trap_2f, UnknownException)
|
|
|
|
|
|
.globl _end_of_vectors
|
|
_end_of_vectors:
|
|
|
|
. = 0x3000
|
|
|
|
/*
|
|
* This code finishes saving the registers to the exception frame
|
|
* and jumps to the appropriate handler for the exception.
|
|
* Register r21 is pointer into trap frame, r1 has new stack pointer.
|
|
*/
|
|
.globl transfer_to_handler
|
|
transfer_to_handler:
|
|
stw r22,_NIP(r21)
|
|
lis r22,MSR_POW@h
|
|
andc r23,r23,r22
|
|
stw r23,_MSR(r21)
|
|
SAVE_GPR(7, r21)
|
|
SAVE_4GPRS(8, r21)
|
|
SAVE_8GPRS(12, r21)
|
|
SAVE_8GPRS(24, r21)
|
|
mflr r23
|
|
andi. r24,r23,0x3f00 /* get vector offset */
|
|
stw r24,TRAP(r21)
|
|
li r22,0
|
|
stw r22,RESULT(r21)
|
|
lwz r24,0(r23) /* virtual address of handler */
|
|
lwz r23,4(r23) /* where to go when done */
|
|
mtspr SRR0,r24
|
|
mtspr SRR1,r20
|
|
mtlr r23
|
|
SYNC
|
|
rfi /* jump to handler, enable MMU */
|
|
|
|
int_return:
|
|
mfmsr r28 /* Disable interrupts */
|
|
li r4,0
|
|
ori r4,r4,MSR_EE
|
|
andc r28,r28,r4
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r28
|
|
SYNC
|
|
lwz r2,_CTR(r1)
|
|
lwz r0,_LINK(r1)
|
|
mtctr r2
|
|
mtlr r0
|
|
lwz r2,_XER(r1)
|
|
lwz r0,_CCR(r1)
|
|
mtspr XER,r2
|
|
mtcrf 0xFF,r0
|
|
REST_10GPRS(3, r1)
|
|
REST_10GPRS(13, r1)
|
|
REST_8GPRS(23, r1)
|
|
REST_GPR(31, r1)
|
|
lwz r2,_NIP(r1) /* Restore environment */
|
|
lwz r0,_MSR(r1)
|
|
mtspr SRR0,r2
|
|
mtspr SRR1,r0
|
|
lwz r0,GPR0(r1)
|
|
lwz r2,GPR2(r1)
|
|
lwz r1,GPR1(r1)
|
|
SYNC
|
|
rfi
|
|
|
|
/*
|
|
* This code initialises the E300 processor core
|
|
* (conforms to PowerPC 603e spec)
|
|
* Note: expects original MSR contents to be in r5.
|
|
*/
|
|
.globl init_e300_core
|
|
init_e300_core: /* time t 10 */
|
|
/* Initialize machine status; enable machine check interrupt */
|
|
/*-----------------------------------------------------------*/
|
|
|
|
li r3, MSR_KERNEL /* Set ME and RI flags */
|
|
rlwimi r3, r5, 0, 25, 25 /* preserve IP bit set by HRCW */
|
|
#ifdef DEBUG
|
|
rlwimi r3, r5, 0, 21, 22 /* debugger might set SE & BE bits */
|
|
#endif
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
mtspr SRR1, r3 /* Make SRR1 match MSR */
|
|
|
|
|
|
lis r3, CFG_IMMRBAR@h
|
|
#if defined(CONFIG_WATCHDOG)
|
|
/* Initialise the Wathcdog values and reset it (if req) */
|
|
/*------------------------------------------------------*/
|
|
lis r4, CFG_WATCHDOG_VALUE
|
|
ori r4, r4, (SWCRR_SWEN | SWCRR_SWRI | SWCRR_SWPR)
|
|
stw r4, SWCRR(r3)
|
|
|
|
/* and reset it */
|
|
|
|
li r4, 0x556C
|
|
sth r4, SWSRR@l(r3)
|
|
li r4, 0xAA39
|
|
sth r4, SWSRR@l(r3)
|
|
#else
|
|
/* Disable Wathcdog */
|
|
/*-------------------*/
|
|
xor r4, r4, r4
|
|
stw r4, SWCRR(r3)
|
|
#endif /* CONFIG_WATCHDOG */
|
|
|
|
/* Initialize the Hardware Implementation-dependent Registers */
|
|
/* HID0 also contains cache control */
|
|
/*------------------------------------------------------*/
|
|
|
|
lis r3, CFG_HID0_INIT@h
|
|
ori r3, r3, CFG_HID0_INIT@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
lis r3, CFG_HID0_FINAL@h
|
|
ori r3, r3, CFG_HID0_FINAL@l
|
|
SYNC
|
|
mtspr HID0, r3
|
|
|
|
lis r3, CFG_HID2@h
|
|
ori r3, r3, CFG_HID2@l
|
|
SYNC
|
|
mtspr HID2, r3
|
|
|
|
/* clear all BAT's */
|
|
/*----------------------------------*/
|
|
|
|
xor r0, r0, r0
|
|
mtspr DBAT0U, r0
|
|
mtspr DBAT0L, r0
|
|
mtspr DBAT1U, r0
|
|
mtspr DBAT1L, r0
|
|
mtspr DBAT2U, r0
|
|
mtspr DBAT2L, r0
|
|
mtspr DBAT3U, r0
|
|
mtspr DBAT3L, r0
|
|
mtspr IBAT0U, r0
|
|
mtspr IBAT0L, r0
|
|
mtspr IBAT1U, r0
|
|
mtspr IBAT1L, r0
|
|
mtspr IBAT2U, r0
|
|
mtspr IBAT2L, r0
|
|
mtspr IBAT3U, r0
|
|
mtspr IBAT3L, r0
|
|
SYNC
|
|
|
|
/* invalidate all tlb's
|
|
*
|
|
* From the 603e User Manual: "The 603e provides the ability to
|
|
* invalidate a TLB entry. The TLB Invalidate Entry (tlbie)
|
|
* instruction invalidates the TLB entry indexed by the EA, and
|
|
* operates on both the instruction and data TLBs simultaneously
|
|
* invalidating four TLB entries (both sets in each TLB). The
|
|
* index corresponds to bits 15-19 of the EA. To invalidate all
|
|
* entries within both TLBs, 32 tlbie instructions should be
|
|
* issued, incrementing this field by one each time."
|
|
*
|
|
* "Note that the tlbia instruction is not implemented on the
|
|
* 603e."
|
|
*
|
|
* bits 15-19 correspond to addresses 0x00000000 to 0x0001F000
|
|
* incrementing by 0x1000 each time. The code below is sort of
|
|
* based on code in "flush_tlbs" from arch/ppc/kernel/head.S
|
|
*
|
|
*/
|
|
|
|
li r3, 32
|
|
mtctr r3
|
|
li r3, 0
|
|
1: tlbie r3
|
|
addi r3, r3, 0x1000
|
|
bdnz 1b
|
|
SYNC
|
|
|
|
/* Done! */
|
|
/*------------------------------*/
|
|
blr
|
|
|
|
/* Cache functions.
|
|
*
|
|
* Note: requires that all cache bits in
|
|
* HID0 are in the low half word.
|
|
*/
|
|
.globl icache_enable
|
|
icache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_ICE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_disable
|
|
icache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ICE|HID0_ILOCK
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_ICFI
|
|
isync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock*/
|
|
isync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl icache_status
|
|
icache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_ICE_SHIFT, 31, 31
|
|
blr
|
|
|
|
.globl dcache_enable
|
|
dcache_enable:
|
|
mfspr r3, HID0
|
|
ori r3, r3, HID0_ENABLE_DATA_CACHE
|
|
lis r4, 0
|
|
ori r4, r4, HID0_LOCK_DATA_CACHE
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_LOCK_INSTRUCTION_CACHE
|
|
sync
|
|
mtspr HID0, r4 /* sets enable and invalidate, clears lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_disable
|
|
dcache_disable:
|
|
mfspr r3, HID0
|
|
lis r4, 0
|
|
ori r4, r4, HID0_ENABLE_DATA_CACHE|HID0_LOCK_DATA_CACHE
|
|
andc r3, r3, r4
|
|
ori r4, r3, HID0_INVALIDATE_DATA_CACHE
|
|
sync
|
|
mtspr HID0, r4 /* sets invalidate, clears enable and lock */
|
|
sync
|
|
mtspr HID0, r3 /* clears invalidate */
|
|
blr
|
|
|
|
.globl dcache_status
|
|
dcache_status:
|
|
mfspr r3, HID0
|
|
rlwinm r3, r3, HID0_DCE_SHIFT, 31, 31
|
|
blr
|
|
|
|
.globl get_pvr
|
|
get_pvr:
|
|
mfspr r3, PVR
|
|
blr
|
|
|
|
/*-------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* void relocate_code (addr_sp, gd, addr_moni)
|
|
*
|
|
* This "function" does not return, instead it continues in RAM
|
|
* after relocating the monitor code.
|
|
*
|
|
* r3 = dest
|
|
* r4 = src
|
|
* r5 = length in bytes
|
|
* r6 = cachelinesize
|
|
*/
|
|
.globl relocate_code
|
|
relocate_code:
|
|
mr r1, r3 /* Set new stack pointer */
|
|
mr r9, r4 /* Save copy of Global Data pointer */
|
|
mr r10, r5 /* Save copy of Destination Address */
|
|
|
|
mr r3, r5 /* Destination Address */
|
|
lis r4, CFG_MONITOR_BASE@h /* Source Address */
|
|
ori r4, r4, CFG_MONITOR_BASE@l
|
|
lwz r5, GOT(__init_end)
|
|
sub r5, r5, r4
|
|
li r6, CFG_CACHELINE_SIZE /* Cache Line Size */
|
|
|
|
/*
|
|
* Fix GOT pointer:
|
|
*
|
|
* New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE)
|
|
* + Destination Address
|
|
*
|
|
* Offset:
|
|
*/
|
|
sub r15, r10, r4
|
|
|
|
/* First our own GOT */
|
|
add r14, r14, r15
|
|
/* then the one used by the C code */
|
|
add r30, r30, r15
|
|
|
|
/*
|
|
* Now relocate code
|
|
*/
|
|
|
|
cmplw cr1,r3,r4
|
|
addi r0,r5,3
|
|
srwi. r0,r0,2
|
|
beq cr1,4f /* In place copy is not necessary */
|
|
beq 7f /* Protect against 0 count */
|
|
mtctr r0
|
|
bge cr1,2f
|
|
la r8,-4(r4)
|
|
la r7,-4(r3)
|
|
|
|
/* copy */
|
|
1: lwzu r0,4(r8)
|
|
stwu r0,4(r7)
|
|
bdnz 1b
|
|
|
|
addi r0,r5,3
|
|
srwi. r0,r0,2
|
|
mtctr r0
|
|
la r8,-4(r4)
|
|
la r7,-4(r3)
|
|
|
|
/* and compare */
|
|
20: lwzu r20,4(r8)
|
|
lwzu r21,4(r7)
|
|
xor. r22, r20, r21
|
|
bne 30f
|
|
bdnz 20b
|
|
b 4f
|
|
|
|
/* compare failed */
|
|
30: li r3, 0
|
|
blr
|
|
|
|
2: slwi r0,r0,2 /* re copy in reverse order ... y do we needed it? */
|
|
add r8,r4,r0
|
|
add r7,r3,r0
|
|
3: lwzu r0,-4(r8)
|
|
stwu r0,-4(r7)
|
|
bdnz 3b
|
|
|
|
/*
|
|
* Now flush the cache: note that we must start from a cache aligned
|
|
* address. Otherwise we might miss one cache line.
|
|
*/
|
|
4:
|
|
bl un_setup_stack_in_data_cache
|
|
mr r7, r3
|
|
mr r8, r4
|
|
bl dcache_disable
|
|
mr r3, r7
|
|
mr r4, r8
|
|
|
|
cmpwi r6,0
|
|
add r5,r3,r5
|
|
beq 7f /* Always flush prefetch queue in any case */
|
|
subi r0,r6,1
|
|
andc r3,r3,r0
|
|
mfspr r7,HID0 /* don't do dcbst if dcache is disabled*/
|
|
rlwinm r7,r7,HID0_DCE_SHIFT,31,31
|
|
cmpwi r7,0
|
|
beq 9f
|
|
mr r4,r3
|
|
5: dcbst 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 5b
|
|
sync /* Wait for all dcbst to complete on bus */
|
|
9: mfspr r7,HID0 /* don't do icbi if icache is disabled */
|
|
rlwinm r7,r7,HID0_DCE_SHIFT,31,31
|
|
cmpwi r7,0
|
|
beq 7f
|
|
mr r4,r3
|
|
6: icbi 0,r4
|
|
add r4,r4,r6
|
|
cmplw r4,r5
|
|
blt 6b
|
|
7: sync /* Wait for all icbi to complete on bus */
|
|
isync
|
|
|
|
/*
|
|
* We are done. Do not return, instead branch to second part of board
|
|
* initialization, now running from RAM.
|
|
*/
|
|
|
|
addi r0, r10, in_ram - _start + EXC_OFF_SYS_RESET
|
|
mtlr r0
|
|
blr
|
|
|
|
in_ram:
|
|
|
|
/*
|
|
* Relocation Function, r14 point to got2+0x8000
|
|
*
|
|
* Adjust got2 pointers, no need to check for 0, this code
|
|
* already puts a few entries in the table.
|
|
*/
|
|
li r0,__got2_entries@sectoff@l
|
|
la r3,GOT(_GOT2_TABLE_)
|
|
lwz r11,GOT(_GOT2_TABLE_)
|
|
mtctr r0
|
|
sub r11,r3,r11
|
|
addi r3,r3,-4
|
|
1: lwzu r0,4(r3)
|
|
add r0,r0,r11
|
|
stw r0,0(r3)
|
|
bdnz 1b
|
|
|
|
/*
|
|
* Now adjust the fixups and the pointers to the fixups
|
|
* in case we need to move ourselves again.
|
|
*/
|
|
2: li r0,__fixup_entries@sectoff@l
|
|
lwz r3,GOT(_FIXUP_TABLE_)
|
|
cmpwi r0,0
|
|
mtctr r0
|
|
addi r3,r3,-4
|
|
beq 4f
|
|
3: lwzu r4,4(r3)
|
|
lwzux r0,r4,r11
|
|
add r0,r0,r11
|
|
stw r10,0(r3)
|
|
stw r0,0(r4)
|
|
bdnz 3b
|
|
4:
|
|
clear_bss:
|
|
/*
|
|
* Now clear BSS segment
|
|
*/
|
|
lwz r3,GOT(__bss_start)
|
|
#if defined(CONFIG_HYMOD)
|
|
/*
|
|
* For HYMOD - the environment is the very last item in flash.
|
|
* The real .bss stops just before environment starts, so only
|
|
* clear up to that point.
|
|
*
|
|
* taken from mods for FADS board
|
|
*/
|
|
lwz r4,GOT(environment)
|
|
#else
|
|
lwz r4,GOT(_end)
|
|
#endif
|
|
|
|
cmplw 0, r3, r4
|
|
beq 6f
|
|
|
|
li r0, 0
|
|
5:
|
|
stw r0, 0(r3)
|
|
addi r3, r3, 4
|
|
cmplw 0, r3, r4
|
|
bne 5b
|
|
6:
|
|
|
|
mr r3, r9 /* Global Data pointer */
|
|
mr r4, r10 /* Destination Address */
|
|
bl board_init_r
|
|
|
|
/*
|
|
* Copy exception vector code to low memory
|
|
*
|
|
* r3: dest_addr
|
|
* r7: source address, r8: end address, r9: target address
|
|
*/
|
|
.globl trap_init
|
|
trap_init:
|
|
lwz r7, GOT(_start)
|
|
lwz r8, GOT(_end_of_vectors)
|
|
|
|
li r9, 0x100 /* reset vector always at 0x100 */
|
|
|
|
cmplw 0, r7, r8
|
|
bgelr /* return if r7>=r8 - just in case */
|
|
|
|
mflr r4 /* save link register */
|
|
1:
|
|
lwz r0, 0(r7)
|
|
stw r0, 0(r9)
|
|
addi r7, r7, 4
|
|
addi r9, r9, 4
|
|
cmplw 0, r7, r8
|
|
bne 1b
|
|
|
|
/*
|
|
* relocate `hdlr' and `int_return' entries
|
|
*/
|
|
li r7, .L_MachineCheck - _start + EXC_OFF_SYS_RESET
|
|
li r8, Alignment - _start + EXC_OFF_SYS_RESET
|
|
2:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 2b
|
|
|
|
li r7, .L_Alignment - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_ProgramCheck - _start + EXC_OFF_SYS_RESET
|
|
bl trap_reloc
|
|
|
|
li r7, .L_FPUnavailable - _start + EXC_OFF_SYS_RESET
|
|
li r8, SystemCall - _start + EXC_OFF_SYS_RESET
|
|
3:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 3b
|
|
|
|
li r7, .L_SingleStep - _start + EXC_OFF_SYS_RESET
|
|
li r8, _end_of_vectors - _start + EXC_OFF_SYS_RESET
|
|
4:
|
|
bl trap_reloc
|
|
addi r7, r7, 0x100 /* next exception vector */
|
|
cmplw 0, r7, r8
|
|
blt 4b
|
|
|
|
mfmsr r3 /* now that the vectors have */
|
|
lis r7, MSR_IP@h /* relocated into low memory */
|
|
ori r7, r7, MSR_IP@l /* MSR[IP] can be turned off */
|
|
andc r3, r3, r7 /* (if it was on) */
|
|
SYNC /* Some chip revs need this... */
|
|
mtmsr r3
|
|
SYNC
|
|
|
|
mtlr r4 /* restore link register */
|
|
blr
|
|
|
|
/*
|
|
* Function: relocate entries for one exception vector
|
|
*/
|
|
trap_reloc:
|
|
lwz r0, 0(r7) /* hdlr ... */
|
|
add r0, r0, r3 /* ... += dest_addr */
|
|
stw r0, 0(r7)
|
|
|
|
lwz r0, 4(r7) /* int_return ... */
|
|
add r0, r0, r3 /* ... += dest_addr */
|
|
stw r0, 4(r7)
|
|
|
|
blr
|
|
|
|
#ifdef CFG_INIT_RAM_LOCK
|
|
.globl unlock_ram_in_cache
|
|
unlock_ram_in_cache:
|
|
/* invalidate the INIT_RAM section */
|
|
lis r3, (CFG_INIT_RAM_ADDR & ~31)@h
|
|
ori r3, r3, (CFG_INIT_RAM_ADDR & ~31)@l
|
|
li r2,512
|
|
mtctr r2
|
|
1: icbi r0, r3
|
|
dcbi r0, r3
|
|
addi r3, r3, 32
|
|
bdnz 1b
|
|
sync /* Wait for all icbi to complete on bus */
|
|
isync
|
|
blr
|
|
#endif
|
|
|
|
map_flash_by_law1:
|
|
/* When booting from ROM (Flash or EPROM), clear the */
|
|
/* Address Mask in OR0 so ROM appears everywhere */
|
|
/*----------------------------------------------------*/
|
|
lis r3, (CFG_IMMRBAR)@h /* r3 <= CFG_IMMRBAR */
|
|
lwz r4, OR0@l(r3)
|
|
li r5, 0x7fff /* r5 <= 0x00007FFFF */
|
|
and r4, r4, r5
|
|
stw r4, OR0@l(r3) /* OR0 <= OR0 & 0x00007FFFF */
|
|
|
|
/* As MPC8349E User's Manual presented, when RCW[BMS] is set to 0,
|
|
* system will boot from 0x0000_0100, and the LBLAWBAR0[BASE_ADDR]
|
|
* reset value is 0x00000; when RCW[BMS] is set to 1, system will boot
|
|
* from 0xFFF0_0100, and the LBLAWBAR0[BASE_ADDR] reset value is
|
|
* 0xFF800. From the hard resetting to here, the processor fetched and
|
|
* executed the instructions one by one. There is not absolutely
|
|
* jumping happened. Laterly, the u-boot code has to do an absolutely
|
|
* jumping to tell the CPU instruction fetching component what the
|
|
* u-boot TEXT base address is. Because the TEXT base resides in the
|
|
* boot ROM memory space, to garantee the code can run smoothly after
|
|
* that jumping, we must map in the entire boot ROM by Local Access
|
|
* Window. Sometimes, we desire an non-0x00000 or non-0xFF800 starting
|
|
* address for boot ROM, such as 0xFE000000. In this case, the default
|
|
* LBIU Local Access Widow 0 will not cover this memory space. So, we
|
|
* need another window to map in it.
|
|
*/
|
|
lis r4, (CFG_FLASH_BASE)@h
|
|
ori r4, r4, (CFG_FLASH_BASE)@l
|
|
stw r4, LBLAWBAR1(r3) /* LBLAWBAR1 <= CFG_FLASH_BASE */
|
|
lis r4, (0x80000016)@h
|
|
ori r4, r4, (0x80000016)@l
|
|
stw r4, LBLAWAR1(r3) /* LBLAWAR1 <= 8MB Flash Size */
|
|
blr
|
|
|
|
/* Though all the LBIU Local Access Windows and LBC Banks will be
|
|
* initialized in the C code, we'd better configure boot ROM's
|
|
* window 0 and bank 0 correctly at here.
|
|
*/
|
|
remap_flash_by_law0:
|
|
/* Initialize the BR0 with the boot ROM starting address. */
|
|
lwz r4, BR0(r3)
|
|
li r5, 0x7FFF
|
|
and r4, r4, r5
|
|
lis r5, (CFG_FLASH_BASE & 0xFFFF8000)@h
|
|
ori r5, r5, (CFG_FLASH_BASE & 0xFFFF8000)@l
|
|
or r5, r5, r4
|
|
stw r5, BR0(r3) /* r5 <= (CFG_FLASH_BASE & 0xFFFF8000) | (BR0 & 0x00007FFF) */
|
|
|
|
lwz r4, OR0(r3)
|
|
lis r5, 0xFF80 /* 8M */
|
|
or r4, r4, r5
|
|
stw r4, OR0(r3) /* OR0 <= OR0 | 0xFF800000 */
|
|
|
|
lis r4, (CFG_FLASH_BASE)@h
|
|
ori r4, r4, (CFG_FLASH_BASE)@l
|
|
stw r4, LBLAWBAR0(r3) /* LBLAWBAR0 <= CFG_FLASH_BASE */
|
|
|
|
lis r4, (0x80000016)@h
|
|
ori r4, r4, (0x80000016)@l
|
|
stw r4, LBLAWAR0(r3) /* LBLAWAR0 <= 8MB Flash Size */
|
|
|
|
xor r4, r4, r4
|
|
stw r4, LBLAWBAR1(r3)
|
|
stw r4, LBLAWAR1(r3) /* Off LBIU LAW1 */
|
|
blr
|
|
|
|
setup_stack_in_data_cache_on_r1:
|
|
lis r3, (CFG_IMMRBAR)@h
|
|
|
|
/* setup D-BAT for the D-Cache (with out real memory backup) */
|
|
|
|
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
|
|
mtspr DBAT0U, r4
|
|
ori r4, r4, 0x0002
|
|
mtspr DBAT0L, r4
|
|
isync
|
|
|
|
#if 0
|
|
/* Enable MMU */
|
|
mfmsr r4
|
|
ori r4, r4, (MSR_DR | MSR_IR)@l
|
|
mtmsr r4
|
|
#endif
|
|
|
|
/* Enable and invalidate data cache. */
|
|
mfspr r4, HID0
|
|
mr r5, r4
|
|
ori r4, r4, HID0_DCE | HID0_DCI
|
|
ori r5, r5, HID0_DCE
|
|
sync
|
|
mtspr HID0, r4
|
|
mtspr HID0, r5
|
|
sync
|
|
|
|
/* Allocate Initial RAM in data cache.*/
|
|
li r0, 0
|
|
lis r4, (CFG_INIT_RAM_ADDR)@h
|
|
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
|
|
li r5, 128*8 /* 128*8*32=32Kb */
|
|
mtctr r5
|
|
1:
|
|
dcbz r0, r4
|
|
addi r4, r4, 32
|
|
bdnz 1b
|
|
isync
|
|
|
|
/* Lock all the D-cache, basically leaving the reset of the program without dcache */
|
|
mfspr r4, HID0
|
|
ori r4, r4, (HID0_DLOCK)@l
|
|
sync
|
|
mtspr HID0 , r4
|
|
|
|
/* setup the stack pointer in r1 */
|
|
lis r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@h
|
|
ori r1, r1, (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET)@l
|
|
li r0, 0 /* Make room for stack frame header and */
|
|
|
|
stwu r0, -4(r1) /* clear final stack frame so that */
|
|
stwu r0, -4(r1) /* stack backtraces terminate cleanly */
|
|
|
|
blr
|
|
|
|
un_setup_stack_in_data_cache:
|
|
blr
|
|
mr r14, r4
|
|
mr r15, r5
|
|
|
|
|
|
lis r4, (CFG_INIT_RAM_ADDR & 0xFFFE0000)@h
|
|
mtspr DBAT0U, r4
|
|
ori r4, r4, 0x0002
|
|
mtspr DBAT0L, r4
|
|
isync
|
|
|
|
/* un lock all the D-cache */
|
|
mfspr r4, HID0
|
|
lis r5, (~(HID0_DLOCK))@h
|
|
ori r5, r5, (~(HID0_DLOCK))@l
|
|
and r4, r4, r5
|
|
sync
|
|
mtspr HID0 , r4
|
|
|
|
/* Re - Allocate Initial RAM in data cache.*/
|
|
li r0, 0
|
|
lis r4, (CFG_INIT_RAM_ADDR)@h
|
|
ori r4, r4, (CFG_INIT_RAM_ADDR)@l
|
|
li r5, 128*8 /* 128*8*32=32Kb */
|
|
mtctr r5
|
|
1:
|
|
dcbz r0, r4
|
|
addi r4, r4, 32
|
|
bdnz 1b
|
|
isync
|
|
|
|
mflr r16
|
|
bl dcache_disable
|
|
mtlr r16
|
|
|
|
blr
|
|
|
|
#if 0
|
|
#define GREEN_LIGHT 0x2B0D4046
|
|
#define RED_LIGHT 0x250D4046
|
|
#define LIB_CNT 0x4FFF
|
|
|
|
/*
|
|
* Lib Light
|
|
*/
|
|
|
|
.globl liblight
|
|
liblight:
|
|
lis r3, CFG_IMMRBAR@h
|
|
ori r3, r3, CFG_IMMRBAR@l
|
|
li r4, 0x3002
|
|
mtmsr r4
|
|
xor r4, r4, r4
|
|
mtspr HID0, r4
|
|
mtspr HID2, r4
|
|
lis r4, 0xF8000000@h
|
|
ori r4, r4, 0xF8000000@l
|
|
stw r4, LBLAWBAR1(r3)
|
|
lis r4, 0x8000000E@h
|
|
ori r4, r4, 0x8000000E@l
|
|
stw r4, LBLAWAR1(r3)
|
|
lis r4, 0xF8000801@h
|
|
ori r4, r4, 0xF8000801@l
|
|
stw r4, BR1(r3)
|
|
lis r4, 0xFFFFE8f0@h
|
|
ori r4, r4, 0xFFFFE8f0@l
|
|
stw r4, OR1(r3)
|
|
|
|
lis r4, 0xF8000000@h
|
|
ori r4, r4, 0xF8000000@l
|
|
lis r5, GREEN_LIGHT@h
|
|
ori r5, r5, GREEN_LIGHT@l
|
|
lis r6, RED_LIGHT@h
|
|
ori r6, r6, RED_LIGHT@l
|
|
lis r7, LIB_CNT@h
|
|
ori r7, r7, LIB_CNT@l
|
|
|
|
1:
|
|
stw r5, 0(r4)
|
|
mtctr r7
|
|
2: bdnz 2b
|
|
stw r6, 0(r4)
|
|
mtctr r7
|
|
3: bdnz 3b
|
|
b 1b
|
|
|
|
#endif
|