123 lines
3.4 KiB
C
123 lines
3.4 KiB
C
/*
|
|
* Copyright 2004 Freescale Semiconductor.
|
|
* Copyright (C) 2003 Motorola Inc.
|
|
* Xianghua Xiao (x.xiao@motorola.com)
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
/*
|
|
* PCI Configuration space access support for MPC85xx PCI Bridge
|
|
*/
|
|
#include <common.h>
|
|
#include <asm/cpm_85xx.h>
|
|
#include <pci.h>
|
|
|
|
|
|
#if defined(CONFIG_PCI)
|
|
|
|
void
|
|
pci_mpc85xx_init(struct pci_controller *hose)
|
|
{
|
|
volatile immap_t *immap = (immap_t *)CFG_CCSRBAR;
|
|
volatile ccsr_pcix_t *pcix = &immap->im_pcix;
|
|
|
|
u16 reg16;
|
|
|
|
hose->first_busno = 0;
|
|
hose->last_busno = 0xff;
|
|
|
|
pci_set_region(hose->regions + 0,
|
|
CFG_PCI1_MEM_BASE,
|
|
CFG_PCI1_MEM_PHYS,
|
|
CFG_PCI1_MEM_SIZE,
|
|
PCI_REGION_MEM);
|
|
|
|
pci_set_region(hose->regions + 1,
|
|
CFG_PCI1_IO_BASE,
|
|
CFG_PCI1_IO_PHYS,
|
|
CFG_PCI1_IO_SIZE,
|
|
PCI_REGION_IO);
|
|
|
|
hose->region_count = 2;
|
|
|
|
pci_setup_indirect(hose,
|
|
(CFG_IMMR+0x8000),
|
|
(CFG_IMMR+0x8004));
|
|
|
|
pcix->potar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
|
|
pcix->potear1 = 0x00000000;
|
|
pcix->powbar1 = (CFG_PCI1_MEM_BASE >> 12) & 0x000fffff;
|
|
pcix->powbear1 = 0x00000000;
|
|
pcix->powar1 = 0x8004401c; /* 512M MEM space */
|
|
|
|
pcix->potar2 = 0x00000000;
|
|
pcix->potear2 = 0x00000000;
|
|
pcix->powbar2 = (CFG_PCI1_IO_BASE >> 12) & 0x000fffff;
|
|
pcix->powbear2 = 0x00000000;
|
|
pcix->powar2 = 0x80088017; /* 16M IO space */
|
|
|
|
pcix->pitar1 = 0x00000000;
|
|
pcix->piwbar1 = 0x00000000;
|
|
pcix->piwar1 = 0xa0f5501e; /* Enable, Prefetch, Local Mem,
|
|
* Snoop R/W, 2G */
|
|
|
|
/*
|
|
* Hose scan.
|
|
*/
|
|
pci_register_hose(hose);
|
|
|
|
pci_read_config_word (PCI_BDF(0,0,0), PCI_COMMAND, ®16);
|
|
reg16 |= PCI_COMMAND_SERR | PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY;
|
|
pci_write_config_word(PCI_BDF(0,0,0), PCI_COMMAND, reg16);
|
|
|
|
/*
|
|
* Clear non-reserved bits in status register.
|
|
*/
|
|
pci_write_config_word(PCI_BDF(0,0,0), PCI_STATUS, 0xffff);
|
|
pci_write_config_byte(PCI_BDF(0,0,0), PCI_LATENCY_TIMER,0x80);
|
|
|
|
#if defined(CONFIG_MPC8555CDS) || defined(CONFIG_MPC8541CDS)
|
|
/*
|
|
* This is a SW workaround for an apparent HW problem
|
|
* in the PCI controller on the MPC85555/41 CDS boards.
|
|
* The first config cycle must be to a valid, known
|
|
* device on the PCI bus in order to trick the PCI
|
|
* controller state machine into a known valid state.
|
|
* Without this, the first config cycle has the chance
|
|
* of hanging the controller permanently, just leaving
|
|
* it in a semi-working state, or leaving it working.
|
|
*
|
|
* Pick on the Tundra, Device 17, to get it right.
|
|
*/
|
|
{
|
|
u8 header_type;
|
|
|
|
pci_hose_read_config_byte(hose,
|
|
PCI_BDF(0,17,0),
|
|
PCI_HEADER_TYPE,
|
|
&header_type);
|
|
}
|
|
#endif
|
|
|
|
hose->last_busno = pci_hose_scan(hose);
|
|
}
|
|
|
|
#endif /* CONFIG_PCI */
|