293 lines
8.7 KiB
C
293 lines
8.7 KiB
C
/*
|
|
* (C) Copyright 2002
|
|
* Sysgo Real-Time Solutions, GmbH <www.elinos.com>
|
|
* Marius Groeger <mgroeger@sysgo.de>
|
|
*
|
|
* (C) Copyright 2002
|
|
* David Mueller, ELSOFT AG, <d.mueller@elsoft.ch>
|
|
*
|
|
* (C) Copyright 2003
|
|
* Texas Instruments, <www.ti.com>
|
|
* Kshitij Gupta <Kshitij@ti.com>
|
|
*
|
|
* (C) Copyright 2004
|
|
* Texas Instruments, <www.ti.com>
|
|
* Rishi Bhattacharya <rishi@ti.com>
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#if defined(CONFIG_OMAP1610)
|
|
#include <./configs/omap1510.h>
|
|
#endif
|
|
|
|
void flash__init (void);
|
|
void ether__init (void);
|
|
void set_muxconf_regs (void);
|
|
void peripheral_power_enable (void);
|
|
|
|
#define COMP_MODE_ENABLE ((unsigned int)0x0000EAEF)
|
|
|
|
static inline void delay (unsigned long loops)
|
|
{
|
|
__asm__ volatile ("1:\n"
|
|
"subs %0, %1, #1\n"
|
|
"bne 1b":"=r" (loops):"0" (loops));
|
|
}
|
|
|
|
/*
|
|
* Miscellaneous platform dependent initialisations
|
|
*/
|
|
|
|
int board_init (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
gd->bd->bi_arch_number = MACH_TYPE_OMAP_OSK;
|
|
|
|
/* adress of boot parameters */
|
|
gd->bd->bi_boot_params = 0x10000100;
|
|
|
|
/* Configure MUX settings */
|
|
set_muxconf_regs ();
|
|
peripheral_power_enable ();
|
|
|
|
/* this speeds up your boot a quite a bit. However to make it
|
|
* work, you need make sure your kernel startup flush bug is fixed.
|
|
* ... rkw ...
|
|
*/
|
|
icache_enable ();
|
|
|
|
flash__init ();
|
|
ether__init ();
|
|
return 0;
|
|
}
|
|
|
|
|
|
int misc_init_r (void)
|
|
{
|
|
/* currently empty */
|
|
return (0);
|
|
}
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
void flash__init (void)
|
|
{
|
|
#define EMIFS_GlB_Config_REG 0xfffecc0c
|
|
unsigned int regval;
|
|
regval = *((volatile unsigned int *) EMIFS_GlB_Config_REG);
|
|
/* Turn off write protection for flash devices. */
|
|
regval = regval | 0x0001;
|
|
*((volatile unsigned int *) EMIFS_GlB_Config_REG) = regval;
|
|
}
|
|
/*************************************************************
|
|
Routine:ether__init
|
|
Description: take the Ethernet controller out of reset and wait
|
|
for the EEPROM load to complete.
|
|
*************************************************************/
|
|
void ether__init (void)
|
|
{
|
|
#define ETH_CONTROL_REG 0x0480000b
|
|
int i;
|
|
|
|
*((volatile unsigned short *) 0xfffece08) = 0x03FF;
|
|
*((volatile unsigned short *) 0xfffb3824) = 0x8000;
|
|
*((volatile unsigned short *) 0xfffb3830) = 0x0000;
|
|
*((volatile unsigned short *) 0xfffb3834) = 0x0009;
|
|
*((volatile unsigned short *) 0xfffb3838) = 0x0009;
|
|
*((volatile unsigned short *) 0xfffb3818) = 0x0002;
|
|
*((volatile unsigned short *) 0xfffb382C) = 0x0048;
|
|
*((volatile unsigned short *) 0xfffb3824) = 0x8603;
|
|
udelay (3);
|
|
for (i=0;i<2000;i++);
|
|
*((volatile unsigned short *) 0xfffb381C) = 0x6610;
|
|
udelay (30);
|
|
for (i=0;i<10000;i++);
|
|
|
|
*((volatile unsigned char *) ETH_CONTROL_REG) &= ~0x01;
|
|
udelay (3);
|
|
|
|
|
|
}
|
|
|
|
/******************************
|
|
Routine:
|
|
Description:
|
|
******************************/
|
|
int dram_init (void)
|
|
{
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
|
|
gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/******************************************************
|
|
Routine: set_muxconf_regs
|
|
Description: Setting up the configuration Mux registers
|
|
specific to the hardware
|
|
*******************************************************/
|
|
void set_muxconf_regs (void)
|
|
{
|
|
volatile unsigned int *MuxConfReg;
|
|
/* set each registers to its reset value; */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
|
|
/* setup for UART1 */
|
|
*MuxConfReg &= ~(0x02000000); /* bit 25 */
|
|
/* setup for UART2 */
|
|
*MuxConfReg &= ~(0x01000000); /* bit 24 */
|
|
/* Disable Uwire CS Hi-Z */
|
|
*MuxConfReg |= 0x08000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_5);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_6);
|
|
/*setup mux for UART3 */
|
|
*MuxConfReg |= 0x00000001; /* bit3, 1, 0 (mux0 5,5,26) */
|
|
*MuxConfReg &= ~0x0000003e;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_7);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_8);
|
|
/* Disable Uwire CS Hi-Z */
|
|
*MuxConfReg |= 0x00001200; /*bit 9 for CS0 12 for CS3 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_9);
|
|
/* Need to turn on bits 21 and 12 in FUNC_MUX_CTRL_9 so the */
|
|
/* hardware will actually use TX and RTS based on bit 25 in */
|
|
/* FUNC_MUX_CTRL_0. I told you this thing was screwy! */
|
|
*MuxConfReg |= 0x00201000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_A);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_B);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_C);
|
|
/* setup for UART2 */
|
|
/* Need to turn on bits 27 and 24 in FUNC_MUX_CTRL_C so the */
|
|
/* hardware will actually use TX and RTS based on bit 24 in */
|
|
/* FUNC_MUX_CTRL_0. */
|
|
*MuxConfReg |= 0x09000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_D);
|
|
*MuxConfReg |= 0x00000020;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_0);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_1);
|
|
*MuxConfReg = 0x00000000;
|
|
/* mux setup for SD/MMC driver */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_2);
|
|
*MuxConfReg &= 0xFFFE0FFF;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
/* bit 13 for MMC2 XOR_CLK */
|
|
*MuxConfReg &= ~(0x00002000);
|
|
/* bit 29 for UART 1 */
|
|
*MuxConfReg &= ~(0x00002000);
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) FUNC_MUX_CTRL_0);
|
|
/* Configure for USB. Turn on VBUS_CTRL and VBUS_MODE. */
|
|
*MuxConfReg |= 0x000C0000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int)USB_TRANSCEIVER_CTRL);
|
|
*MuxConfReg &= ~(0x00000070);
|
|
*MuxConfReg &= ~(0x00000008);
|
|
*MuxConfReg |= 0x00000003;
|
|
*MuxConfReg |= 0x00000180;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
/* bit 17, software controls VBUS */
|
|
*MuxConfReg &= ~(0x00020000);
|
|
/* Enable USB 48 and 12M clocks */
|
|
*MuxConfReg |= 0x00000200;
|
|
*MuxConfReg &= ~(0x00000180);
|
|
/*2.75V for MMCSDIO1 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) VOLTAGE_CTRL_0);
|
|
*MuxConfReg = 0x00001FE7;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_0);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_1);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_3);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PULL_DWN_CTRL_4);
|
|
*MuxConfReg = 0x00000000;
|
|
/* Turn on UART2 48 MHZ clock */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) MOD_CONF_CTRL_0);
|
|
*MuxConfReg |= 0x40000000;
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) USB_OTG_CTRL);
|
|
/* setup for USB VBus detection OMAP161x */
|
|
*MuxConfReg |= 0x00040000; /* bit 18 */
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int) PU_PD_SEL_2);
|
|
/* PullUps for SD/MMC driver */
|
|
*MuxConfReg |= ~(0xFFFE0FFF);
|
|
MuxConfReg =
|
|
(volatile unsigned int *) ((unsigned int)COMP_MODE_CTRL_0);
|
|
*MuxConfReg = COMP_MODE_ENABLE;
|
|
}
|
|
|
|
/******************************************************
|
|
Routine: peripheral_power_enable
|
|
Description: Enable the power for UART1
|
|
*******************************************************/
|
|
void peripheral_power_enable (void)
|
|
{
|
|
#define UART1_48MHZ_ENABLE ((unsigned short)0x0200)
|
|
#define SW_CLOCK_REQUEST ((volatile unsigned short *)0xFFFE0834)
|
|
|
|
*SW_CLOCK_REQUEST |= UART1_48MHZ_ENABLE;
|
|
}
|