1
0
uboot-1.1.4-kirkwood/board/mv_feroceon/mv_hal/twsi/mvTwsiEeprom.S

458 lines
16 KiB
ArmAsm

/*******************************************************************************
Copyright (C) Marvell International Ltd. and its affiliates
This software file (the "File") is owned and distributed by Marvell
International Ltd. and/or its affiliates ("Marvell") under the following
alternative licensing terms. Once you have made an election to distribute the
File under one of the following license alternatives, please (i) delete this
introductory statement regarding license alternatives, (ii) delete the two
license alternatives that you have not elected to use and (iii) preserve the
Marvell copyright notice above.
********************************************************************************
Marvell Commercial License Option
If you received this File from Marvell and you have entered into a commercial
license agreement (a "Commercial License") with Marvell, the File is licensed
to you under the terms of the applicable Commercial License.
********************************************************************************
Marvell GPL License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File in accordance with the terms and conditions of the General
Public License Version 2, June 1991 (the "GPL License"), a copy of which is
available along with the File in the license.txt file or by writing to the Free
Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 or
on the worldwide web at http://www.gnu.org/licenses/gpl.txt.
THE FILE IS DISTRIBUTED AS-IS, WITHOUT WARRANTY OF ANY KIND, AND THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ARE EXPRESSLY
DISCLAIMED. The GPL License provides additional details about this warranty
disclaimer.
********************************************************************************
Marvell BSD License Option
If you received this File from Marvell, you may opt to use, redistribute and/or
modify this File under the following licensing terms.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright
notice, this list of conditions and the following disclaimer in the
documentation and/or other materials provided with the distribution.
* Neither the name of Marvell nor the names of its contributors may be
used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*******************************************************************************/
/* includes */
#define MV_ASMLANGUAGE
#include "ctrlEnv/mvCtrlEnvSpec.h"
#include "boardEnv/mvBoardEnvSpec.h"
#include "mvOsAsm.h"
#include "mvTwsiSpec.h"
#include "mvSysHwConfig.h"
#include "ctrlEnv/sys/mvCpuIfRegs.h"
#include "mvCommon.h"
#define I2C_CH MV_BOARD_DIMM_I2C_CHANNEL
/* defines */
/* defines */
.data
.global _i2cInit
.global _i2cRead
.text
/*******************************************************************************
* _i2cInit - Initialize TWSI interface
*
* DESCRIPTION:
* The function performs TWSI interface initialization. It resets the
* TWSI state machine and initialize its clock to 100KHz assuming Tclock
* of 133MHz.
*
* INPUT:
* None.
*
* OUTPUT:
* None.
*
* RETURN:
* None.
*
*******************************************************************************/
_i2cInit:
mov r9, LR /* Save link register */
mov r0, #0 /* Make sure r0 is zero */
/* Reset the i2c Mechanism first */
MV_REG_WRITE_ASM (r0, r1, TWSI_SOFT_RESET_REG(I2C_CH))
bl _twsiDelay
bl _twsiDelay
/* Initializing the I2C mechanism. Assuming Tclock frequency */
/* of 166MHz. The I2C frequency in that case will be 100KHz. */
/* For this settings, M = 9 and N = 3. Set the baud-rate with the */
/* value of 0x2b (freq of ==> 100KHz */
/* see spec for more details about the calculation of this value) */
mov r6, #(9 << 3 | 3)
MV_REG_WRITE_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
/* Enable the I2C master */
/* Enable TWSI interrupt in main mask reg */
mov r6, #0xC4
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
/* Let the slow TWSI machine get used to the idea that it is enabled */
bl _twsiDelay
mov PC, r9 /* r9 is saved link register */
/*******************************************************************************
* _twsiDelay - Perform delay.
*
* DESCRIPTION:
* The function performs a delay to enable TWSI logic to stable.
*
* INPUT:
* None.
*
* OUTPUT:
* None.
*
* RETURN:
* None.
*
*******************************************************************************/
_twsiDelay:
mov r10, #0x100000 /*was 0x400*/
_twsiDelayLoop:
subs r10, r10, #1
bne _twsiDelayLoop
mov PC, LR
/*******************************************************************************
* _i2cRead - Read byte from I2C EEPROM device.
*
* DESCRIPTION:
* The function returns a byte from I2C EEPROM device.
* The EEPROM device is 7-bit address type.
*
* INPUT:
* r4 has the DIMM0 base address with shift 1 bit to the left
* r7 has the EEPROM offset
*
* OUTPUT:
* None.
*
* RETURN:
* r4 returns '0' if address can not be read.
* r7 has byte value in case read is successful.
*
*******************************************************************************/
_i2cRead:
mov r9, LR /* Save link register */
/* Transmit the device address and desired offset within the EEPROM. */
/* Generate Start Bit */
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
orr r6, r6, #TWSI_CONTROL_START_BIT
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
/* Wait for the interrupt flag (bit3) to be set */
mov r10, #0x50000
loop_1:
subs r10, r10, #1
beq loop_1_timeout
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_1
loop_1_timeout:
/* Wait for the start bit to be reset by HW */
mov r10, #0x50000
loop_2:
subs r10, r10, #1
beq loop_2_timeout
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
tst r6, #TWSI_CONTROL_START_BIT
bne loop_2
loop_2_timeout:
/* Wait for the status TWSI_START_CONDITION_TRA = 0x8 */
mov r10, #0x50000
loop_3:
subs r10, r10, #1
beq loop_3_timeout
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x08
bne loop_3
loop_3_timeout:
/* writing the address of (DIMM0/1 << 1) with write indication */
mov r6, r4, LSL #1 /* Write operation address bit 0 must be 0 */
MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH))
bl _twsiDelay
/* Clear the interrupt flag */
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Waiting for the interrupt flag to be set which means that the
address has been transmitted */
loop_4:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_4 /* if tst = 0, then the bit is not set yet */
/* Wait for status TWSI_ADDR_PLUS_WRITE_BIT_TRA_ACK_REC = 0x18 */
mov r10, #0x50000 /* Set r10 to 0x50000 =~ 328,000 */
loop_5:
subs r10, r10, #1 /* timeout count down */
bne testStatus
mov r4, #0 /* r4 = 0 -> operation failed */
b exit_i2cRead /* Exit if timeout (No DIMM) */
testStatus:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x18
bne loop_5
/* check if the offset is bigger than 256 byte*/
tst r7, #0x80000000
bne great_than_256
/* Write the offset to be read from the DIMM EEPROM */
MV_REG_WRITE_ASM (r7, r1, TWSI_DATA_REG(I2C_CH))
b after_offset
great_than_256:
mov r10, r7, LSR #8
and r10, r10, #0xff
/* Write the offset0 to be read from the EEPROM */
MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH))
/* Clear the interrupt flag ==> signaling that the address can now
be transmited */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the interrupt to be set again ==> address has transmited */
loop_6_1:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_6_1
/* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */
loop_7_1:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x28
bne loop_7_1
mov r10, r7
and r10, r10, #0xff
/* Write the offset1 to be read from the EEPROM */
MV_REG_WRITE_ASM (r10, r1, TWSI_DATA_REG(I2C_CH))
after_offset:
/* Clear the interrupt flag ==> signaling that the address can now
be transmited */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the interrupt to be set again ==> address has transmited */
loop_6:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_6
/* Wait for status TWSI_MAS_TRAN_DATA_BYTE_ACK_REC = 0x28 */
loop_7:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x28
bne loop_7
/* Retransmit the device address with read indication to get the data */
/* generate a repeated start bit */
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
orr r6, r6, #TWSI_CONTROL_START_BIT
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
/* Clear the interrupt flag ==> the start bit will be transmitted. */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the interrupt flag (bit3) to be set */
loop_9:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_9
/* Wait for the start bit to be reset by HW */
loop_8:
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
tst r6, #TWSI_CONTROL_START_BIT
bne loop_8
/* Wait for status TWSI_REPEATED_START_CONDITION_TRA = 0x10 */
loop_10:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x10
bne loop_10
/* Writing the address of (DIMM0<<1) with read indication (bit0 is 1) */
mov r6, r4, LSL #1
orr r6, r6, #1 /* Read operation address bit 0 must be 1 */
MV_REG_WRITE_ASM (r6, r1, TWSI_DATA_REG(I2C_CH))
/* Clear the interrupt flag ==> the address will be transmitted */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the interrupt flag (bit3) to be set as a result of
transmitting the address. */
loop_11:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_11
/* Wait for status TWSI_ADDR_PLUS_READ_BIT_TRA_ACK_REC = 0x40 */
loop_12:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x40
bne loop_12
/* Clear the interrupt flag and the Acknoledge bit */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #(TWSI_CONTROL_INT_FLAG_SET | TWSI_CONTROL_ACK)
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the interrupt flag (bit3) to be set */
loop_14:
#ifdef MV78XX0
MV_REG_READ_ASM (r6, r1, CPU_INT_LOW_REG(I2C_CH))
tst r6, #BIT2
#else
MV_REG_READ_ASM (r6, r1, CPU_MAIN_INT_CAUSE_REG)
tst r6, #BIT5
#endif
beq loop_14
/* Wait for status TWSI_MAS_REC_READ_DATA_ACK_NOT_TRA = 0x58 */
loop_15:
MV_REG_READ_ASM (r6, r1, TWSI_STATUS_BAUDE_RATE_REG(I2C_CH))
cmp r6, #0x58
bne loop_15
/* Store the data in r7. */
MV_REG_READ_ASM (r7, r1, TWSI_DATA_REG(I2C_CH))
/* Generate stop bit */
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
orr r6, r6, #TWSI_CONTROL_STOP_BIT
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
/* Clear the interrupt flag */
bl _twsiDelay
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bic r6, r6, #TWSI_CONTROL_INT_FLAG_SET
MV_REG_WRITE_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
bl _twsiDelay
/* Wait for the stop bit to be reset by HW */
loop_16:
MV_REG_READ_ASM (r6, r1, TWSI_CONTROL_REG(I2C_CH))
tst r6, #TWSI_CONTROL_INT_FLAG_SET
bne loop_16
exit_i2cRead:
mov PC, r9 /* r9 is saved link register */