1
0
uboot-1.1.4-kirkwood/board/cogent/README
2024-01-07 23:57:24 +01:00

119 lines
4.4 KiB
Plaintext

Cogent Modular Architecture configuration
-----------------------------------------
As the name suggests, the Cogent platform is a modular system where
you have a motherboard into which plugs a cpu module and one or more
i/o modules. This provides very nice flexibility, but makes the
configuration task somewhat harder.
The possible Cogent motherboards are:
Code Config Variable Description
---- --------------- -----------
CMA101 CONFIG_CMA101 32MB ram, 2 ser, 1 par, rtc, dipsw,
2x16 lcd, eth(?)
CMA102 CONFIG_CMA102 32MB ram, 2 ser, 1 par, rtc, dipsw,
2x16 lcd
CMA111 CONFIG_CMA111 32MB ram, 1MB flash, 4 ser, 1 par,
rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI,
10/100TP eth
CMA120 CONFIG_CMA120 32MB ram, 1MB flash, 4 ser, 1 par,
rtc, ps/2 kbd/mse, 2x16 lcd, 2xPCI,
10/100TP eth, 2xPCMCIA, video/lcd-panel
CMA150 CONFIG_CMA150 8MB ram, 1MB flash, 2 ser, 1 par, rtc,
ps/2 kbd/mse, 2x16 lcd
The possible Cogent PowerPC CPU modules are:
Code Config Variable Description
---- --------------- -----------
CMA278-603EV CONFIG_CMA278_603EV PPC603ev CPU, 66MHz clock, 512K EPROM,
JTAG/COP
CMA278-603ER CONFIG_CMA278_603ER PPC603er CPU, 66MHz clock, 512K EPROM,
JTAG/COP
CMA278-740 CONFIG_CMA278_740 PPC740 CPU, 66MHz clock, 512K EPROM,
JTAG/COP
CMA280-509 CONFIG_CMA280_509 MPC505/509 CPU, 50MHz clock,
512K EPROM, BDM
CMA282 CONFIG_CMA282 MPC8260 CPU, 66MHz clock, 512K EPROM,
JTAG, 16M RAM, 1 x ser (SMC2),
1 x 10baseT PHY (SCC4), 1 x 10/100 TP
PHY (FCC1), 2 x 48pin DIN (FCC2 + TDM1)
CMA285 CONFIG_CMA285 MPC801 CPU, 33MHz clock, 512K EPROM,
BDM
CMA286-21 CONFIG_CMA286_21 MPC821 CPU, 66MHz clock, 512K EPROM,
BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
1 x 10baseT PHY (SCC2)
CMA286-60-OLD CONFIG_CMA286_60_OLD MPC860 CPU, 33MHz clock, 128K EPROM,
BDM
CMA286-60 CONFIG_CMA286_60 MPC860 CPU, 66MHz clock, 512K EPROM,
BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
1 x 10baseT PHY (SCC2)
CMA286-60P CONFIG_CMA286_60P MPC860P CPU, 66MHz clock, 512K EPROM,
BDM, 16M RAM, 2 x ser (SMC1 + SMC2),
1 x 10baseT PHY (SCC2)
CMA287-23 CONFIG_CMA287_23 MPC823 CPU, 33MHz clock, 512K EPROM,
BDM
CMA287-50 CONFIG_CMA287_50 MPC850 CPU, 33MHz clock, 512K EPROM,
BDM
(there are a lot of other cpu modules with ARM, MIPS and M-CORE CPUs,
but we'll worry about those later).
The possible Cogent CMA I/O Modules are:
Code Config Variable Description
---- --------------- -----------
CMA302 CONFIG_CMA302 up to 16M flash, ps/2 keyboard/mouse
CMA352 CONFIG_CMA352 CMAbus <=> PCI
Currently supported:
Motherboards: CMA102
CPU Modules: CMA286-60-OLD
I/O Modules: CMA302 I/O module
To configure, perform the usual U-Boot configuration task of editing
"include/config_cogent_mpc8xx.h" and reviewing all the options and
settings in there. In particular, check the chip select values
installed into the memory controller's various option and base
registers - these are set by the defines CFG_CMA_CSn_{BASE,SIZE} and
CFG_{B,O}Rn_PRELIM. Also be careful of the clock settings installed
into the SCCR - via the define CFG_SCCR. Finally, decide whether you
want the serial console on motherboard serial port A or on one of the
8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
(NONE means use Cogent motherboard serial port A).
Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
the base address of the EPROM for the CPU module. This should be the
same as the value selected for CFG_MONITOR_BASE in
"include/config_cogent_*.h" (in fact, I have made this automatic via
the -DTEXT_BASE=... option in CPPFLAGS).
Finally, set the values of the make variables $(CMA_MB) and $(CMA_IOMS).
$(CMA_MB) is the name of the directory that contains support for your
motherboard. At this stage, only "cma10x" exists, which supports the
CMA101 and CMA102 motherboards - but only selected devices, namely
serial, lcd and dipsw.
$(CMA_IOMS) is a list of zero or more directories that contain
support for the i/o modules you have installed. At this stage, only
"cma302" exists, which supports the CMA302 flash i/o module - but
only the flash part, not the ps/2 keyboard and mouse interfaces.
There should be a make variable for each of the above directories,
which is the directory name with "_O" appended. This make variable is
a list of object files to compile from that directory and include in
the library.
e.g. cma10x_O = serial.o ...
That's it. Good Luck.
Murray.Jensen@cmst.csiro.au
August 31, 2000.