1
0
uboot-1.1.4-kirkwood/board/nc650/nc650.c
2024-01-07 23:57:24 +01:00

254 lines
6.9 KiB
C

/*
* (C) Copyright 2001
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <config.h>
#include <mpc8xx.h>
/*
* Memory Controller Using
*
* CS0 - Flash memory (0x40000000)
* CS3 - SDRAM (0x00000000}
*/
/* ------------------------------------------------------------------------- */
#define _not_used_ 0xffffffff
const uint sdram_table[] = {
/* single read. (offset 0 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x11adfc04, 0xefbbbc00,
0x1ff77c47,
/* MRS initialization (offset 5) */
0x1ff77c34, 0xefeabc34, 0x1fb57c35,
/* burst read. (offset 8 in upm RAM) */
0x1f07fc04, 0xeeaefc04, 0x10adfc04, 0xf0affc00,
0xf0affc00, 0xf1affc00, 0xefbbbc00, 0x1ff77c47,
_not_used_, _not_used_, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* single write. (offset 18 in upm RAM) */
0x1f27fc04, 0xeeaebc00, 0x01b93c04, 0x1ff77c47,
_not_used_, _not_used_, _not_used_, _not_used_,
/* burst write. (offset 20 in upm RAM) */
0x1f07fc04, 0xeeaebc00, 0x10ad7c00, 0xf0affc00,
0xf0affc00, 0xe1bbbc04, 0x1ff77c47, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* refresh. (offset 30 in upm RAM) */
0x1ff5fc84, 0xfffffc04, 0xfffffc04, 0xfffffc04,
0xfffffc84, 0xfffffc07, _not_used_, _not_used_,
_not_used_, _not_used_, _not_used_, _not_used_,
/* exception. (offset 3c in upm RAM) */
0x7ffffc07, _not_used_, _not_used_, _not_used_
};
const uint nand_flash_table[] = {
/* single read. (offset 0 in upm RAM) */
0x0ff3fc04, 0x0ff3fc04, 0x0ff3fc04, 0x0ffffc04,
0xfffffc00, 0xfffffc05, 0xfffffc05, 0xfffffc05,
/* burst read. (offset 8 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* single write. (offset 18 in upm RAM) */
0x00fffc04, 0x00fffc04, 0x00fffc04, 0x0ffffc04,
0x0ffffc84, 0x0ffffc84, 0xfffffc00, 0xfffffc05,
/* burst write. (offset 20 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* refresh. (offset 30 in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05,
/* exception. (offset 3c in upm RAM) */
0xffffcc05, 0xffffcc05, 0xffffcc05, 0xffffcc05
};
/* ------------------------------------------------------------------------- */
/*
* Check Board Identity:
*/
int checkboard (void)
{
puts ("Board: NC650\n");
return 0;
}
/* ------------------------------------------------------------------------- */
static long int dram_size (long int, long int *, long int);
/* ------------------------------------------------------------------------- */
long int initdram (int board_type)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
long int size8, size9;
long int size_b0 = 0;
unsigned long reg;
upmconfig (UPMA, (uint *) sdram_table,
sizeof (sdram_table) / sizeof (uint));
/*
* Preliminary prescaler for refresh (depends on number of
* banks): This value is selected for four cycles every 62.4 us
* with two SDRAM banks or four cycles every 31.2 us with one
* bank. It will be adjusted after memory sizing.
*/
memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
memctl->memc_mar = 0x00000088;
/*
* Map controller bank 1 to the SDRAM bank at
* preliminary address - these have to be modified after the
* SDRAM size has been determined.
*/
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
udelay (200);
/* perform SDRAM initializsation sequence */
memctl->memc_mcr = 0x80006105; /* SDRAM bank 0 */
udelay (200);
memctl->memc_mcr = 0x80006230; /* SDRAM bank 0 - execute twice */
udelay (200);
memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
udelay (1000);
/*
* Check Bank 0 Memory Size for re-configuration
*
* try 8 column mode
*/
size8 = dram_size (CFG_MAMR_8COL, (ulong *) SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
/*
* try 9 column mode
*/
size9 = dram_size (CFG_MAMR_9COL, (ulong *) SDRAM_BASE3_PRELIM,
SDRAM_MAX_SIZE);
udelay (1000);
if (size8 < size9) {
size_b0 = size9;
} else {
size_b0 = size8;
memctl->memc_mamr = CFG_MAMR_8COL;
udelay (500);
}
/*
* Adjust refresh rate depending on SDRAM type, both banks.
* For types > 128 MBit leave it at the current (fast) rate
*/
if ((size_b0 < 0x02000000)) {
/* reduce to 15.6 us (62.4 us / quad) */
memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
udelay (1000);
}
/*
* Final mapping
*/
memctl->memc_or3 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
/* adjust refresh rate depending on SDRAM type, one bank */
reg = memctl->memc_mptpr;
reg >>= 1; /* reduce to CFG_MPTPR_1BK_8K / _4K */
memctl->memc_mptpr = reg;
udelay (10000);
/* Configure UPMB for NAND flash access */
upmconfig (UPMB, (uint *) nand_flash_table,
sizeof (nand_flash_table) / sizeof (uint));
memctl->memc_mbmr = CFG_MBMR_NAND;
return (size_b0);
}
/* ------------------------------------------------------------------------- */
/*
* Check memory range for valid RAM. A simple memory test determines
* the actually available RAM size between addresses `base' and
* `base + maxsize'. Some (not all) hardware errors are detected:
* - short between address lines
* - short between data lines
*/
static long int dram_size (long int mamr_value, long int *base, long int maxsize)
{
volatile immap_t *immap = (immap_t *) CFG_IMMR;
volatile memctl8xx_t *memctl = &immap->im_memctl;
memctl->memc_mamr = mamr_value;
return (get_ram_size(base, maxsize));
}
#if (CONFIG_COMMANDS & CFG_CMD_NAND)
void nand_init(void)
{
extern unsigned long nand_probe(unsigned long physadr);
unsigned long totlen = nand_probe(CFG_NAND_BASE);
printf ("%4lu MB\n", totlen >> 20);
}
#endif