319 lines
9.2 KiB
C
319 lines
9.2 KiB
C
/*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC5xxx 1 /* This is an MPC5xxx CPU */
|
|
#define CONFIG_MPC5200 1 /* (more precisely an MPC5200 CPU) */
|
|
#define CONFIG_INKA4X0 1 /* INKA4x0 board */
|
|
|
|
#define CFG_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
|
|
#define BOOTFLAG_WARM 0x02 /* Software reboot */
|
|
|
|
#define CONFIG_MISC_INIT_F 1 /* Use misc_init_f() */
|
|
|
|
#define CFG_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
# define CFG_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CFG_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
#define CONFIG_PCI_SCAN_SHOW 1
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CFG_XLB_PIPELINING 1
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
/*
|
|
* Supported commands
|
|
*/
|
|
#define CONFIG_COMMANDS (CONFIG_CMD_DFL | \
|
|
CFG_CMD_DHCP | \
|
|
CFG_CMD_EXT2 | \
|
|
CFG_CMD_FAT | \
|
|
CFG_CMD_IDE | \
|
|
CFG_CMD_NFS | \
|
|
CFG_CMD_PCI | \
|
|
CFG_CMD_SNTP | \
|
|
CFG_CMD_USB )
|
|
|
|
/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
|
|
#include <cmd_confdefs.h>
|
|
|
|
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
|
|
|
|
#if (TEXT_BASE == 0xFFE00000) /* Boot low */
|
|
# define CFG_LOWBOOT 1
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"flash_nfs=run nfsargs addip;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip;bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_82xx\0" \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
|
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#define CFG_IPBSPEED_133 /* define for 133MHz speed */
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CFG_FLASH_BASE 0xFFE00000
|
|
|
|
#define CFG_FLASH_SIZE 0x00200000 /* 2 MByte */
|
|
#define CFG_MAX_FLASH_SECT 35 /* max num of sects on one chip */
|
|
|
|
#define CFG_ENV_ADDR (CFG_FLASH_BASE + 0x4000) /* second sector */
|
|
#define CFG_MAX_FLASH_BANKS 1 /* max num of flash banks
|
|
(= chip selects) */
|
|
#define CFG_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
|
|
#define CFG_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CFG_ENV_IS_IN_FLASH 1
|
|
#define CFG_ENV_SIZE 0x2000
|
|
#define CFG_ENV_SECT_SIZE 0x2000
|
|
#define CONFIG_ENV_OVERWRITE 1
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CFG_MBAR 0xF0000000
|
|
#define CFG_SDRAM_BASE 0x00000000
|
|
#define CFG_DEFAULT_MBAR 0x80000000
|
|
|
|
#define CONFIG_MPC5200_DDR
|
|
|
|
/* Use ON-Chip SRAM until RAM will be available */
|
|
#define CFG_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#ifdef CONFIG_POST
|
|
/* preserve space for the post_word at end of on-chip SRAM */
|
|
#define CFG_INIT_RAM_END MPC5XXX_SRAM_POST_SIZE
|
|
#else
|
|
#define CFG_INIT_RAM_END MPC5XXX_SRAM_SIZE
|
|
#endif
|
|
|
|
|
|
#define CFG_GBL_DATA_SIZE 128 /* size in bytes reserved for initial data */
|
|
#define CFG_GBL_DATA_OFFSET (CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
|
|
#define CFG_INIT_SP_OFFSET CFG_GBL_DATA_OFFSET
|
|
|
|
#define CFG_MONITOR_BASE TEXT_BASE
|
|
#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
|
|
# define CFG_RAMBOOT 1
|
|
#endif
|
|
|
|
#define CFG_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
|
|
#define CFG_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
|
|
#define CFG_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
/*
|
|
* Define CONFIG_FEC_10MBIT to force FEC at 10Mb
|
|
*/
|
|
/* #define CONFIG_FEC_10MBIT 1 */
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*
|
|
* use CS1 as gpio_wkup_6 output
|
|
* Bit 0 (mask: 0x80000000): 0
|
|
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
|
|
* 00 -> No Alternatives, I2C1 is used for onboard EEPROM
|
|
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1 do not use on TQM5200 with onboard
|
|
* EEPROM
|
|
* use PSC1 as UART: Bits 28-31 (mask: 0x00000007): 0100
|
|
* use PSC6_1 and PSC6_3 as GPIO: Bits 9:11 (mask: 0x07000000):
|
|
* 011 -> PSC6 could not be used as UART or CODEC. IrDA still possible.
|
|
*/
|
|
#define CFG_GPS_PORT_CONFIG 0x01001004
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CFG_LONGHELP /* undef to save memory */
|
|
#define CFG_PROMPT "=> " /* Monitor Command Prompt */
|
|
#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
|
|
#define CFG_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
|
|
#define CFG_MAXARGS 16 /* max number of command args */
|
|
#define CFG_BARGSIZE CFG_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
/* Enable an alternate, more extensive memory test */
|
|
#define CFG_ALT_MEMTEST
|
|
|
|
#define CFG_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CFG_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CFG_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
#define CFG_HZ 1000 /* decrementer freq: 1 ms ticks */
|
|
|
|
/*
|
|
* Enable loopw commando. This has only affect, if CFG_CMD_MEM is defined,
|
|
* which is normally part of the default commands (CFV_CMD_DFL)
|
|
*/
|
|
#define CONFIG_LOOPW
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#if defined(CONFIG_MPC5200)
|
|
#define CFG_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CFG_HID0_FINAL HID0_ICE
|
|
#else
|
|
#define CFG_HID0_INIT 0
|
|
#define CFG_HID0_FINAL 0
|
|
#endif
|
|
|
|
#define CFG_BOOTCS_START CFG_FLASH_BASE
|
|
#define CFG_BOOTCS_SIZE CFG_FLASH_SIZE
|
|
#define CFG_BOOTCS_CFG 0x00087800 /* for pci_clk = 66 MHz */
|
|
#define CFG_CS0_START CFG_FLASH_BASE
|
|
#define CFG_CS0_SIZE CFG_FLASH_SIZE
|
|
|
|
/* 32Mbit SRAM @0x30000000 */
|
|
#define CFG_CS1_START 0x30000000
|
|
#define CFG_CS1_SIZE 0x00400000
|
|
#define CFG_CS1_CFG 0x31800 /* for pci_clk = 33 MHz */
|
|
|
|
/* 2 quad UART @0x80000000 (MBAR is relocated to 0xF0000000) */
|
|
#define CFG_CS2_START 0x80000000
|
|
#define CFG_CS2_SIZE 0x0001000
|
|
#define CFG_CS2_CFG 0x21800 /* for pci_clk = 33 MHz */
|
|
|
|
/* GPIO in @0x30400000 */
|
|
#define CFG_CS3_START 0x30400000
|
|
#define CFG_CS3_SIZE 0x00100000
|
|
#define CFG_CS3_CFG 0x31800 /* for pci_clk = 33 MHz */
|
|
|
|
#define CFG_CS_BURST 0x00000000
|
|
#define CFG_CS_DEADCYCLE 0x33333333
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_OHCI
|
|
#define CONFIG_USB_CLOCK 0x00015555
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_RESET /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CFG_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CFG_IDE_MAXDEVICE 2 /* max. 1 drive per IDE bus */
|
|
|
|
#define CFG_ATA_IDE0_OFFSET 0x0000
|
|
#define CFG_ATA_BASE_ADDR MPC5XXX_ATA
|
|
#define CFG_ATA_DATA_OFFSET 0x0060 /* Offset for data I/O */
|
|
#define CFG_ATA_REG_OFFSET (CFG_ATA_DATA_OFFSET) /* Offset for normal register accesses */
|
|
#define CFG_ATA_ALT_OFFSET 0x005C /* Offset for alternate registers */
|
|
#define CFG_ATA_STRIDE 4 /* Interval between registers */
|
|
|
|
#define CONFIG_ATAPI 1
|
|
|
|
#define CFG_BRIGHTNESS 0xFF /* LCD Default Brightness (255 = off) */
|
|
|
|
#endif /* __CONFIG_H */
|